Objective
Printed electronics (PE) is set to revolutionise the electronics industry over the next decade and can offer Europe the opportunity to regain lost market share. Printed electronics allows for the direct printing of a range of functional (conductive, resistive, capacitive and semi-conducting) nanomaterials formulations to enable a simpler, more cost-effective, high performance and high volume processing in comparison to traditional printed circuit board and semiconductor manufacturing techniques. It has been reported by Frost and Sullivan that the market for printed electronics will increase in revenues from $0.53Bn in 2010 to $5.04 Bn in 2016 at a compound annual growth rate of 32.5%.
However, the migration towards low-cost, liquid-based, high resolution deposition and patterning using high throughput techniques, such as inkjet printing, requires that suitable functional nanomaterials formulations (e.g. inks) are available for end users in industrially relevant quantities. Presently, there are issues with industrial supply of nanomaterials which are low cost, high performance, environmentally friendly and tailored for high throughput systems. Therefore better collaboration is warranted between supply chain partners to ensure nanomaterial production and nanomaterial formulations are tailored for end use applications to meet this need.
The INSPIRED project will address these fundamental issues within the printed electronics industry: Ensuring that suitable functional nanomaterials formulations (inks) are available for end users in industrial scale quantities. Production of these nanomaterial formulations on an industrial scale and then depositing them using cost-effective, high throughput printing technologies enables rapid production of printed electronic components, on a wide variety of substrates. Therefore, enabling new electronics applications, whilst overcoming the problems associated with traditional manufacturing.
Fields of science
- engineering and technologynanotechnologynano-materialstwo-dimensional nanostructuresgraphene
- natural scienceschemical sciencesinorganic chemistrytransition metals
- engineering and technologymaterials engineeringcoating and films
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors
Programme(s)
Funding Scheme
IA - Innovation actionCoordinator
8010 Graz
Austria
See on map
Participants (13)
15895 Ames A Coruna
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
Participation ended
GU14 0LX Farnborough
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
OX5 1FP Kidlington
See on map
DH8 7ND Consett
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
8010 Graz
See on map
PO15 5TH Fareham
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
Participation ended
13790 Rousset
LV-3602 Ventspils
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
1150 Bruxelles
See on map
40126 Bologna
See on map
48160 Derio (Bizkaia)
See on map
15782 Santiago De Compostela
See on map
175 43 Jarfalla
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.