Skip to main content

Flexible Fossil Power Plants for the Future Energy Market through new and advanced Turbine Technologies

Deliverables

FLEXTURBINE public website

Public website presenting project approach and current results.

Searching for OpenAIRE data...

Publications

Design of a static test rig for advanced seals and air bearing testing

Author(s): A.-L. Zimmermann, R. H. M. Giepman, Q. T. Nguyen Tran, C. Aalburg, V. Gümmer
Published in: 2017

Through-Flow Modeling of Single- and Two-Shaft Gas Turbines at Wide Operating Range

Author(s): Alexander Wiedermann, Milan V. Petrovic
Published in: Volume 2C: Turbomachinery, 2018, Page(s) V02CT42A006
DOI: 10.1115/gt2018-75394

Part Load Behavior of the LP Part of an Industrial Gas Turbine

Author(s): Milan V. Petrovic, Alexander Wiedermann, Srecko M. Nedeljkovic, Milan Banjac
Published in: Volume 2A: Turbomachinery, 2017, Page(s) V02AT40A033
DOI: 10.1115/gt2017-64778

High temperature fatigue testing of gas turbine blades

Author(s): M. Beghini, L. Bertini, C. Santus, B.D. Monelli, E. Scrinzi, N. Pieroni, I. Giovannetti
Published in: Procedia Structural Integrity, Issue 7, 2017, Page(s) 206-213, ISSN 2452-3216
DOI: 10.1016/j.prostr.2017.11.079

Thermo-mechanical fatigue prediction of a steam turbine shaft

Author(s): Martin Nesládek, Michal Bartošák, Josef Jurenka, Jan Papuga, Milan Růžička, Petr Měšt’ánek, Jan Džugan
Published in: MATEC Web of Conferences, Issue 165, 2018, Page(s) 22016, ISSN 2261-236X
DOI: 10.1051/matecconf/201816522016

An assessment of thermo-mechanically induced fatigue damage of a steam turbine shaft

Author(s): M. Nesládek, J. Jurenka, M. Lutovinov, M. Růžička, P. Měšťánek, J. Džugan
Published in: Procedia Structural Integrity, Issue 7, 2017, Page(s) 190-197, ISSN 2452-3216
DOI: 10.1016/j.prostr.2017.11.077

Crack propagation under combined cycle fatigue for a precipitation hardened steel

Author(s): L. Patriarca, S. Foletti, S. Beretta, S. Parodi, A. Riva
Published in: Procedia Structural Integrity, Issue 7, 2017, Page(s) 214-221, ISSN 2452-3216
DOI: 10.1016/j.prostr.2017.11.080

Calibration of blade tip-timing sensor for shrouded 40″ last stage blade

Author(s): Z. Kubín, T. Mísek, J. Hlous, T. Dadaková, J. Kellner, T. Bachorec
Published in: Mechanical Systems and Signal Processing, Issue 108, 2018, Page(s) 88-98, ISSN 0888-3270
DOI: 10.1016/j.ymssp.2018.02.001

CFD prediction of flutter of turbine blades and comparison with an experimental test case

Author(s): Vaclav Slama, Bartolomej Rudas, Jiri Ira, Ales Macalka, Petr Eret, Volodymyr Tsymbalyuk
Published in: MATEC Web of Conferences, Issue 168, 2018, Page(s) 02005, ISSN 2261-236X
DOI: 10.1051/matecconf/201816802005

A computational fluid dynamics investigation of the segmented integral squeeze film damper

Author(s): Petr Ferfecki, Jaroslav Zapoměl, Marek Gebauer, Václav Polreich, Jiří Křenek
Published in: MATEC Web of Conferences, Issue 254, 2019, Page(s) 08005, ISSN 2261-236X
DOI: 10.1051/matecconf/201925408005

Thermal Turbulent Flow in Leading Edge Grooved and Conventional Tilting Pad Journal Bearing Segments—A Comparative Study

Author(s): Philip Croné, Andreas Almqvist, Roland Larsson
Published in: Lubricants, Issue 6/4, 2018, Page(s) 97, ISSN 2075-4442
DOI: 10.3390/lubricants6040097

EXPERIMENTAL AND NUMERICAL STUDY OF CONTROLLED FLUTTER TESTING IN A LINEAR TURBINE BLADE CASCADE

Author(s): Václav Sláma, Bartoloměj Rudas, Petr Eret, Volodymyr Tsymbalyuk, Jiří Ira, Aleš Macalka, Lorenzo Pinelli, Federico Vanti, Andrea Arnone, Antonio Alfio Lo Balbo
Published in: Acta Polytechnica CTU Proceedings, Issue 20, 2018, Page(s) 98-107, ISSN 2336-5382
DOI: 10.14311/app.2018.20.0098

Investigation of hold period influence on residual fatigue live in steam turbine shaft design

Author(s): M Rund, R Procházka, J Džugan, P Konopík, M Nesládek, J Jurenka, M Růžička, P Měšt’ánek
Published in: IOP Conference Series: Materials Science and Engineering, Issue 461, 2018, Page(s) 012072, ISSN 1757-899X
DOI: 10.1088/1757-899x/461/1/012072

A low cycle fatigue life model for a shot peened gas turbine disc alloy

Author(s): Robert Eriksson, Johan Moverare, Zhe Chen
Published in: International Journal of Fatigue, Issue 124, 2019, Page(s) 34-41, ISSN 0142-1123
DOI: 10.1016/j.ijfatigue.2019.02.034

THERMO-MECHANICAL FATIGUE ANALYSIS OF A STEAM TURBINE SHAFT

Author(s): Martin Nesládek, Josef Jurenka, Michal Bartošák, Milan Růžička, Maxim Lutovinov, Jan Papuga, Radek Procházka, Jan Džugan, Petr Měšťánek
Published in: Acta Polytechnica CTU Proceedings, Issue 20, 2018, Page(s) 56-64, ISSN 2336-5382
DOI: 10.14311/APP.2018.20.0056

THE EFFECT OF NOTCHES ON THE FATIGUE LIFE OF A NICKEL-BASE GAS TURBINE DISK MATERIAL

Author(s): Robert Eriksson, Johan Moverare, Zhe Chen, Kjell Simonsson
Published in: Acta Polytechnica CTU Proceedings, Issue 20, 2018, Page(s) 34-42, ISSN 2336-5382
DOI: 10.14311/APP.2018.20.0034

EXPERIMENTAL AND NUMERICAL ASSESSMENT OF A LAST STAGE ST BLADE DAMPING AT LOW LOAD OPERATION

Author(s): Andrea Bessone, Luigi Carassale, Roberto Guida, Zdeněk Kubín, Antonio Alfio Lo Balbo, Michela Marrè Brunenghi, Lorenzo Pinelli
Published in: Acta Polytechnica CTU Proceedings, Issue 20, 2018, Page(s) 16-28, ISSN 2336-5382
DOI: 10.14311/APP.2018.20.0016

HIGH TEMPERATURE CYCLIC TEST RIG – A NEW RIG FOR HOT GAS PARTS LIFETIME VALIDATION

Author(s): Wieland Ammer, Mario Raddatz, Uwe Gampe, Julien Nussbaum, Uwe Ruedel, Rudolf Kellerer
Published in: Acta Polytechnica CTU Proceedings, Issue 20, 2018, Page(s) 1-4, ISSN 2336-5382
DOI: 10.14311/APP.2018.20.0001

Review of the operational flexibility and emissions of gas- and coal-fired power plants in a future with growing renewables

Author(s): Miguel Angel Gonzalez-Salazar, Trevor Kirsten, Lubos Prchlik
Published in: Renewable and Sustainable Energy Reviews, 2017, ISSN 1364-0321
DOI: 10.1016/j.rser.2017.05.278