Skip to main content
European Commission logo print header

An integrated pilot line for micro-fabricated medical devices

Deliverables

Initial dissemination plan & communication plan

Initial dissemination plan & communication plan

Public summary of project

Public summary of project

Final report on projects results

Final report on project results

Measurement equipment for Cytopatch prototypes demonstrated

Measurement equipment for Cytopatch prototypes demonstrated

Demonstration of ablation catheter using ultra-sound ablation monitoring and OSS

Demonstration of ablation catheter using ultra-sound ablation monitoring and OSS

Prototype feasibility demonstration

Prototype feasibility demonstration

Final prototype and associated datasheet

Final prototype and associated datasheet

Demonstration of ready-to-use electrophysiology CMOS chip

Demonstration of ready-to-use electrophysiology CMOS chip

Implementation and way of working with Product Data Management system

Implementation and way of working with Product Data Management system

First prototypes of Cytopatch and MEA chip

First prototypes of Cytopatch and MEA chip

Blue print for development & industrialization project micro modules.

Blue print for development & industrialization project micro modules.

Demonstration of a fully optically powered smart catheter

Demonstration of a fully optically powered smart catheter

Demonstrate Statistical Process Control (SPC) on the defined critical process parameters.

Demonstrate Statistical Process Control (SPC) on the defined critical process parameters.

Demonstration of in-wall extruded electrode contacts as technology for the production of highly integrated catheters.

Demonstration of in-wall extruded electrode contacts as technology for the production of highly integrated catheters.

InForMed Exploitation Symposium

Report on InForMed Exploitation Symposium and launching event (DMD conference)

Publications

Novell method for adhesion between pi-pdms using butyl rubber for large area body patches

Author(s): S.Joshi et al.
Published in: 2017
Publisher: Eurosensor

Chemically Stable Atomic-Layer-Deposited Al 2 O 3 Films for Processability

Author(s): Mikael Broas, Olli Kanninen, Vesa Vuorinen, Markku Tilli, Mervi Paulasto-Kröckel
Published in: ACS Omega, Issue 2/7, 2017, Page(s) 3390-3398, ISSN 2470-1343
Publisher: AS Omega
DOI: 10.1021/acsomega.7b00443

Single-Step CMOS Compatible Fabrication of High Aspect Ratio Microchannels Embedded in Silicon

Author(s): Marta Kluba, Aslihan Arslan, Ronald Stoute, James Muganda, Ronald Dekker
Published in: Proceedings, Issue 1/4, 2017, Page(s) 291, ISSN 2504-3900
Publisher: Eurosensor
DOI: 10.3390/proceedings1040291

Ultra-Stretchable Interconnects for High-Density Stretchable Electronics

Author(s): Salman Shafqat, Johan Hoefnagels, Angel Savov, Shivani Joshi, Ronald Dekker, Marc Geers
Published in: Micromachines, Issue 8/9, 2017, Page(s) 277, ISSN 2072-666X
Publisher: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/mi8090277

Electrifying catheters with light,” The Optical Society, Optics Express Vol. 25, Issue 8, pp. 8534-8549 (2017). The article was highlighted on the optical society SPOTLIGHT page in May 2017!

Author(s): M. Pekar et al.
Published in: Optics express, 2017, ISSN 1094-4087
Publisher: Optical Society of America

Flex-to-Rigid (F2R), A high precision assembly platform,” A brochure explaining the open F2R platform that will be running in the pilot-line.

Author(s): University of Delft and Philips Research.
Published in: 2017
Publisher: Philips

Searching for OpenAIRE data...

There was an error trying to search data from OpenAIRE

No results available