Commercial introduction of the first Airborne Wind Energy system: Renewable energy at costs below fully depreciated coal fired power plants

Project Information

AMPYXAP3

Grant agreement ID: 666793

DOI 10.3030/666793

Project closed

EC signature date 3 June 2015

Start date 1 April 2015

End date 30 September 2019

Funded under

• SOCIETAL CHALLENGES - Secure, clean and efficient energy

Total cost € 3 701 937,50

EU contribution € 2 500 000,00

Coordinated by

AMPYX POWER BV
Netherlands

CORDIS provides links to public deliverables and publications of HORIZON projects.

Links to deliverables and publications from FP7 projects, as well as links to some specific result types such as dataset and software, are dynamically retrieved from OpenAIRE .

Publications

Conference proceedings (4)

Flight Test Verification of a Rigid Wing Airborne Wind Energy System

Author(s): P. Williams et al.
Published in: 2019
Publisher: Proceedings of American Control Conference

Viability assessment of a rigid wing airborne wind energy pumping system

Author(s): Giovanni Licitra, Jonas Koenemann, Greg Horn, Paul Williams, Richard Ruiterkamp, Moritz Diehl
Published in: 2017 21st International Conference on Process Control (PC), 2017, Page(s) 452-458, ISBN 978-1-5386-4011-1
Publisher: IEEE
DOI: 10.1109/pc.2017.7976256

Optimal control for minimizing power consumption during holding patterns for airborne wind energy pumping system

Author(s): G. Licitra, S. Sieberling, S. Engelen, P. Williams, R. Ruiterkamp, M. Diehl
Published in: 2016 European Control Conference (ECC), Issue 1, 2016, Page(s) 1574-1579, ISBN 978-1-5090-2591-6
Publisher: IEEE
DOI: 10.1109/ecc.2016.7810515

Optimum experimental design of a rigid wing AWE pumping system

Author(s): Giovanni Licitra, Adrian Burger, Paul Williams, Richard Ruiterkamp, Moritz Diehl
Published in: 2017 IEEE 56th Annual Conference on Decision and Control (CDC), Issue 1, 2017, Page(s) 4018-4025, ISBN 978-1-5090-2873-3
Publisher: IEEE
DOI: 10.1109/cdc.2017.8264250

Peer reviewed articles (7)

Performance assessment of a rigid wing Airborne Wind Energy pumping system

Author(s): G. Licitra, J. Koenemann, A. Bürger, P. Williams, R. Ruiterkamp, M. Diehl
Published in: Energy, Issue 173, 2019, Page(s) 569-585, ISSN 0360-5442
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.energy.2019.02.064

Aerodynamic model identification of an autonomous aircraft for airborne wind energy

Author(s): Giovanni Licitra, Adrian Bürger, Paul Williams, Richard Ruiterkamp, Moritz Diehl
Published in: Optimal Control Applications and Methods, Issue 40/3, 2019, Page(s) 422-447, ISSN 0143-2087
Publisher: John Wiley & Sons Inc.
DOI: 10.1002/oca.2485

Modeling of an airborne wind energy system with a flexible tether model for the optimization of landing trajectories * *Support by the EU via ERC-HIGHWIND (259 166), ITN-TEMPO (607 957), and ITN-AWESCO (642 682) and by DFG in context of the Research Unit FOR 2401.

Author(s): Jonas Koenemann, Paul Williams, Soeren Sieberling, Moritz Diehl
Published in: IFAC-PapersOnLine, Issue 50/1, 2017, Page(s) 11944-11950, ISSN 2405-8963
Publisher: Elsevier
DOI: 10.1016/j.ifacol.2017.08.1037

A reference model for airborne wind energy systems for optimization and control

Author(s): E.C. Malz, J. Koenemann, S. Sieberling, S. Gros
Published in: Renewable Energy, Issue 140, 2019, Page(s) 1004-1011, ISSN 0960-1481
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.renene.2019.03.111

Optimal input design for autonomous aircraft

Author(s): G. Licitra, A. Bürger, P. Williams, R. Ruiterkamp, M. Diehl
Published in: Control Engineering Practice, Issue 77, 2018, Page(s) 15-27, ISSN 0967-0661
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.conengprac.2018.04.013

Aerodynamic Parameter Identification for an Airborne Wind Energy Pumping System * *This research was supported by Support by the EU via ERC-HIGHWIND (259 166), ITN-TEMPO (607 957), ITN-AWESCO (642 682) and by DFG in context of the Research Unit FOR 2401.

Author(s): G. Licitra, P. Williams, J. Gillis, S. Ghandchi, S. Sieberling, R. Ruiterkamp, M. Diehl
Published in: IFAC-PapersOnLine, Issue 50/1, 2017, Page(s) 11951-11958, ISSN 2405-8963
Publisher: Elsevier
DOI: 10.1016/j.ifacol.2017.08.1038

Cable Modeling Approximations for Rapid Simulation

Author(s): Paul Williams
Published in: Journal of Guidance, Control, and Dynamics, Issue 40/7, 2017, Page(s) 1779-1788, ISSN 0731-5090
Publisher: American Institute of Aeronautics and Astronautics
DOI: 10.2514/1.g002354

Book chapters (4)

Life Cycle Assessment of Electricity Production from Airborne Wind Energy

Author(s): Stefan Wilhelm
Published in: Airborne Wind Energy, Issue 1, 2018, Page(s) 727-750, ISBN 978-981-10-1946-3
Publisher: Springer Singapore
DOI: 10.1007/978-981-10-1947-0_30

Ecological Impact of Airborne Wind Energy Technology: Current State of Knowledge and Future Research Agenda

Author(s): Leo Bruinzeel, Erik Klop, Allix Brenninkmeijer, Jaap Bosch
Published in: Airborne Wind Energy, Issue 1, 2018, Page(s) 679-701, ISBN 978-981-10-1946-3
Publisher: Springer Singapore
DOI: 10.1007/978-981-10-1947-0_28

A Roadmap Towards Airborne Wind Energy in the Utility Sector

Author(s): Michiel Kruijff, Richard Ruiterkamp
Published in: Airborne Wind Energy, 2018, Page(s) 643-662, ISBN 978-981-10-1946-3
Publisher: Springer Singapore
DOI: 10.1007/978-981-10-1947-0_26

Current and Expected Airspace Regulations for Airborne Wind Energy Systems

Author(s): Volkan Salma, Richard Ruiterkamp, Michiel Kruijff, M. M. van Paassen, Roland Schmehl
Published in: Airborne Wind Energy, 2018, Page(s) 703-725, ISBN 978-981-10-1946-3
Publisher: Springer Singapore
DOI: 10.1007/978-981-10-1947-0_29

Intellectual Property Rights

Patent (6)

METHOD FOR OPERATION OF A SYSTEM FOR AIRBORNE WIND ENERGY PRODUCTION AND RESPECTIVE SYSTEM

Application/Publication number: 20 17025311
Date: 2017-10-18
Applicant(s): AMPYX POWER BV

System and method for airborne wind energy production

Application/Publication number: 12 157057
Date: 2012-02-27
Applicant(s): AMPYX POWER BV

METHOD FOR LANDING A TETHERED AIRCRAFT AND LAUNCH AND LAND SYSTEM

Application/Publication number: 20 18059308
Date: 2018-04-11
Applicant(s): AMPYX POWER BV

Glider for airborne wind energy production

Application/Publication number: 12 181506
Date: 2012-08-23
Applicant(s): AMPYX POWER BV

LAUNCH AND LAND SYSTEM FOR A TETHERED AIRCRAFT

Application/Publication number: 20 18059307
Date: 2018-04-11
Applicant(s): AMPYX POWER BV

Tether and system for airborne wind energy production

Application/Publication number: 13 190686
Date: 2013-10-29
Applicant(s): AMPYX POWER BV