Skip to main content

Multi-ObjecTive design Optimization of fluid eneRgy machines

Deliverables

Report on FSI coupling

Report on FSI coupling

Progress report period 1

Progress report on period 1 (M1-M18)

Report and prototype software for multivariate adaptive spline technology

Report and prototype software for multivariate adaptive spline technology

Report on shape deformation techniques based on volumet-ric approaches

Report on shape deformation techniques based on volumet-ric approaches (dissemination level: PU/RE)

Report and prototype for structural mechanics solver

Report and prototype for structural mechanics solver

Report and prototype software for geometry-aware block structuring and volume parameterization

Report and prototype software for geometry-aware block structuring and volume parameterization

Project presentation of objective and work plan

Report on project presentation of objective and work plan

Volumetric parameterization of the flow passage using adaptive spline technologies and the proposed template mapping

Volumetric parameterization of the flow passage using adaptive spline technologies and the proposed template mapping

Report and prototype for incompressible flow solver

Report and prototype for incompressible flow solver

Report and prototype for visualization environment

Report and prototype for visualization environment

Report and prototype for compressible flow solver

Report and prototype for compressible flow solver

Final report

Final report

Searching for OpenAIRE data...

Publications

A NURBS based Galerkin approach for the analysis of solids in boundary representation

Author(s): L. Chen, B. Simeon, S. Klinkel
Published in: Computer Methods in Applied Mechanics and Engineering, 305, 2016, Page(s) 777-805, ISSN 0045-7825
Publisher: Elsevier BV
DOI: 10.1016/j.cma.2016.03.019

Patchwork B-spline refinement

Author(s): Nora Engleitner, Bert Jüttler
Published in: Computer-Aided Design, 90, 2017, Page(s) 168-179, ISSN 0010-4485
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.cad.2017.05.021

On penalty-free formulations for multipatch isogeometric Kirchhoff–Love shells

Author(s): Anmol Goyal, Bernd Simeon
Published in: Mathematics and Computers in Simulation, 136, 2017, Page(s) 78-103, ISSN 0378-4754
Publisher: Elsevier BV
DOI: 10.1016/j.matcom.2016.12.001

Elliptic Grid Generation Techniques in the Framework of Isogeometric Analysis Applications

Author(s): Jochen Hinz, Matthias Möller, C. Vuik
Published in: Computer Aided Geometric Design, 2018, ISSN 0167-8396
Publisher: Elsevier BV

Isogeometric segmentation: Construction of cutting surfaces

Author(s): Michael Haberleitner, Bert Jüttler
Published in: Computer-Aided Design, 90, 2017, Page(s) 135-145, ISSN 0010-4485
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.cad.2017.05.007

THB-splines: An effective mathematical technology for adaptive refinement in geometric design and isogeometric analysis

Author(s): Carlotta Giannelli, Bert Jüttler, Stefan K. Kleiss, Angelos Mantzaflaris, Bernd Simeon, Jaka Špeh
Published in: Computer Methods in Applied Mechanics and Engineering, 299, 2016, Page(s) 337-365, ISSN 0045-7825
Publisher: Elsevier BV
DOI: 10.1016/j.cma.2015.11.002

Planar multi-patch domain parameterization via patch adjacency graphs

Author(s): Florian Buchegger, Bert Jüttler
Published in: Computer-Aided Design, Vol 81, January 2017, 2017, Page(s) 2-12, ISSN 0010-4485
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.cad.2016.05.019

High-Order Isogeometric Methods for Compressible Flows. II. Compressible Euler Equations

Author(s): Matthias Möller and Andrzej Jaeschke
Published in: Proceedings of the 19th International Conference on Finite Elements in Flow Problems - FEF 2017, 2018
Publisher: Springer

Spline-Based Meshing Techniques for Industrial Applications

Author(s): Jochen Hinz, Matthias Möller, C. Vuik
Published in: 2018
Publisher: European Community on Computational Methods in Applied Sciences (ECCOMAS)

Demonstration of Propeller Blade Optimization using BEM and CFD

Author(s): Simon Törnros, Olof Klerebrant Klasson
Published in: 21st Numerical Towing Tank Symposium (NuTTS'18), 2018
Publisher: N/A

Energy potential of dual lead rotors for twin screw compressors

Author(s): Matthias Utri, Andreas Brümmer
Published in: IOP Conference Series: Materials Science and Engineering 232, 2017, 2017
Publisher: IOP

Isogeometric analysis framework for the numerical simulation of rotary screw machines. I. General concept and early applications

Author(s): Matthias Möller and Jochen Hinz
Published in: Proceedings of the 10th International Conference on Screw Machines (ICSM 2018), 2018
Publisher: IOP Science

Spline-Based Parameterization Techniques for Twin-Screw Machine Geometries

Author(s): Jochen Hinz, Matthias Möller, C. Vuik
Published in: 2018
Publisher: IOPscience

Isogeometric Simulation of Thermal Expansion for Twin Screw Compressors

Author(s): Alexander Shamanskiy and Bernd Simeon
Published in: IOP Conference Series: Materials Science and Engineering, 2018, ISSN 1757-8981
Publisher: IOP Publishing

Fluid flow through male rotor housing clearances of dry running screw machines using dimensionless numbers

Author(s): Matthias Utri, Simon Höckenkamp, Andreas Brümmer
Published in: IOP Conference Series, not yet available (International Conference on Screw Machines 2018), 2018
Publisher: IOP

Fluid Flow through Front Clearances of Dry Running Screw Machines Using Dimensionless Numbers

Author(s): Matthias Utri, Andreas Brümmer
Published in: 24th International compressor engineering conference at Purdue, 2018
Publisher: Ray W. Herrick Laboratories

Comparison of thermodynamic efficiency between constant, dual and multiple lead rotors for an industrial air screw compressor

Author(s): Matthias Utri, Andreas Brümmer, Jan Hauser
Published in: IOP Conference Series, not yet available (International Conference on Screw Machines 2018), 2018
Publisher: IOP

Autonomous Meshing

Author(s): Dominik Mokriš, Jona Mangold, Martin Schifko
Published in: SAE Technical Paper Series, 2018-01-1386, 2018
Publisher: SAE International
DOI: 10.4271/2018-01-1386

High-Order Isogeometric Methods for Compressible Flows. I. Scalar Conservation Laws

Author(s): Andrzej Jaeschke and Matthias Möller
Published in: Proceedings of the 19th International Conference on Finite Elements in Flow Problems - FEF 2017, 2018
Publisher: Springer

FDBB: FLUID DYNAMICS BUILDING BLOCKS

Author(s): Matthias Möller and Andrzej Jaeschke
Published in: 2018
Publisher: European Community on Computational Methods in Applied Sciences (ECCOMAS)

Propeller geometry modeling in a CAD environment

Author(s): Foeth, E.J., Deij-van Rijswijk. M.
Published in: 2019 International Symposium on Marine Propulsors, 2019
Publisher: Insean

One click - Multiparts to 3D mesh

Author(s): Martin Schifko (ESS)
Published in: NAFEMS European Conference: Computational Fluid Dynamics (CFD) – Beyond the Solve, December 2-3, 2015, 2015, Page(s) 5
Publisher: NAFEMS

One Click: Multipart CAD to 3D Mesh

Author(s): Martin Schifko (ESS)
Published in: SAE 2016 World Congress and Exhibition, 2016-04-05, 2015, Page(s) 7
Publisher: SAE

Netzaufbereitung mit einem Klick

Author(s): Bernhard Kornberger
Published in: "DFO Tagung ""Einsparmoglichkeiten durch Simulation des Lackierprozess""", 2016-09-14, 2015
Publisher: DFO

Multi-patch parameterization using template mapping

Author(s): Svajunas Sajavicius, Bert Juettler, Jaka Speh
Published in: 9th International Conference on Mathematical Methods for Curves and Surfaces, Biannually, 2016, Page(s) 76
Publisher: University of Oslo

Improvement of the Efficiency of Twin-Screw Refrigeration Compressors by means of Dual Lead Rotors

Author(s): Matthias Utri, Andreas Brümmer
Published in: 23rd International Compressor Engineering Conference at Purdue, 23, every two years, 2016
Publisher: Ray W. Herrick Laboratories

Direct visualization of IGA simulation models on modern GPUs

Author(s): Anna Pia Lohfink
Published in: Mafelap conference, 2016
Publisher: Brunel University London

Algebraic flux correction schemes for B-spline based finite elements

Author(s): Matthias Möller, Andrzej Jaeschke
Published in: 2015
Publisher: IMA Conference on Numerical Methods for Simulation

Solving Compressible Flow Problems by Isogeometric Analysis: A pragmatic approach towards node-level performance

Author(s): Matthias Möller
Published in: 2016
Publisher: MAFELAP 2016 – Brunel University London

Solving Compressible Flow Problems by Isogeometric Analysis

Author(s): Matthias Möller
Published in: 2016
Publisher: USACM Conference on Isogeometric Analysis and Meshfree Methods 2016

Solving Compressible Flow Problems by Iso-geometric Analysis: A pragmatic approach towards node-level performance

Author(s): Matthias Möller
Published in: 2016
Publisher: ESCO 2016 Conference

Isogeometric Analysis: The better alternative to FEM?

Author(s): Matthias Möller
Published in: 2016
Publisher: Deltares

High-Order Isogeometric Methods for Compressible Flows: Part 2: Towards Efficient Implementations on HPC Platforms

Author(s): Matthias Möller, Andrzej Jaeschke
Published in: 2017
Publisher: IACM FEF Conference 2017

Multi patch parameterization using template mapping

Author(s): Svajunas Sajavicius
Published in: Conference of Curves and Surfaces, 2016
Publisher: Conference of Curves and Surfaces

Hardware-Oriented Numerics for PDEs: Solving Compressible Flow Problems by Isogeometric Analysis

Author(s): Matthias Möller
Published in: 2016
Publisher: Scientific Computing Seminar at TU Kaiserslautern

Numerické modelování proudění ve vodních turbínách

Author(s): M. Brandner, H. Horníková, J. Šourek
Published in: 2016
Publisher: PANM 18 (Programy a algoritmy numerické matematiky 18)

Implementing incompressible flow solver based on isogeometric analysis

Author(s): J. Šourek, H. Horníková
Published in: 2016
Publisher: • Seminar on Differential Equations 2016

Template mapping using adaptive splines and optimal parameterization

Author(s): Svajūnas Sajavičius, Bert Jüttler, Jaka Špeh
Published in: Springer INdAM Series, 2019
Publisher: Springer International Publoshing AG

Domain parameterization with THB-splines

Author(s): Jaka Speh
Published in: 2016
Publisher: Johannes Kepler Universität Linz

Implementation of Navier-Stokes Equations Solver Based on G+Smo Library

Author(s): J. Šourek
Published in: 2016
Publisher: PANM 18 (Programy a algoritmy numerické matematiky 18)

Knihovna nástrojů pro isogeometrickou analýzu G+Smo

Author(s): H. Horníková
Published in: 2016
Publisher: PANM 18 (Programy a algoritmy numerické matematiky 18)