Deliverables Documents, reports (4) Demonstration of the ComMUnion joining system for aeronautical pilot case Public report that shows the performance of ComMUnion system applied to aeronautical applications. Report of life cycle impact assessment results (LCA) Public LCA results, conclusions. Demonstration of the ComMUnion joining system for automotive pilot case Public report that shows the performance of ComMUnion system applied to automotive applications. Demonstration of ComMUnion assembly/disassembly Public report that shows the feasibility for assembly/disassembly of the ComMUnion joining process. Other (1) ComMUnion dataset for benchmarking Public dataset with data, measurements and routings for benchmarking purposes. Demonstrators, pilots, prototypes (1) ComMUnion prototype Prototype TRL 7. Public system prototype demonstrated in operational environments –aeronautical and automotive sectors—. Websites, patent fillings, videos etc. (2) Project Website Project website with public and private areas to collaborate among partners and to disseminate the public results of the project. The contents will be updated every 3 months. Communication material and record reports Including: Dossier including all the publications related to the ComMUnion project (flyers, posters, brochures). 5-minutes video. Wikipedia page on the project and its results. Publications Peer reviewed articles (7) Speckle characterization of surface roughness obtained by laser texturing Author(s): F. Rodríguez, I. Cotto, S. Dasilva, P. Rey, K. Van der Straeten Published in: Procedia Manufacturing, Issue 13, 2017, Page(s) 519-525, ISSN 2351-9789 Publisher: Elsevier DOI: 10.1016/j.promfg.2017.09.077 Joining of Thermoplastic Tapes with Metal Alloys Utilizing Novel Laser Sources and Enhanced Process Control in a Tape Placement Process Author(s): C. Kukla, T. Peters, H. Janssen, C. Brecher Published in: Procedia CIRP, Issue 66, 2017, Page(s) 85-90, ISSN 2212-8271 Publisher: Elsevier DOI: 10.1016/j.procir.2017.03.307 Fracture mechanics based assessment of manufacturing defects laying at the edge of CFRP-metal bondlines Author(s): Konstantinos Anyfantis, Panagiotis Stavropoulos, George Chryssolouris Published in: Production Engineering, Issue 12/2, 2018, Page(s) 173-183, ISSN 0944-6524 Publisher: Springer Verlag DOI: 10.1007/s11740-018-0796-1 An approach for the design of multi-material mechanical components Author(s): Konstantinos Anyfantis, Panagiotis Stavropoulos, Panagis Foteinopoulos, George Chryssolouris Published in: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2018, Page(s) 095440541876399, ISSN 0954-4054 Publisher: Professional Engineering Publishing Ltd. DOI: 10.1177/0954405418763995 Polygon scanning system for high-power, high-speed microstructuring Author(s): Kira van der Straeten, Oliver Nottrodt, Milena Zuric, Alexander Olowinsky, Peter Abels, Arnold Gillner Published in: Procedia CIRP, Issue 74, 2018, Page(s) 491-494, ISSN 2212-8271 Publisher: Elsevier DOI: 10.1016/j.procir.2018.08.137 Design for Manufacturing of Multi-material Mechanical Parts: A Computational Based Approach Author(s): Konstantinos Anyfantis, Panagis Foteinopoulos, Panagiotis Stavropoulos Published in: Procedia CIRP, Issue 66, 2017, Page(s) 22-26, ISSN 2212-8271 Publisher: ELSEVIER DOI: 10.1016/j.procir.2017.03.365 Unified Approach in Design and Manufacturing Optimization of Hybrid Metal-composites Parts Author(s): Panagis Foteinopoulos, Panagiotis Stavropoulos, Alexios Papacharalampopoulos, George Chryssolouris Published in: Procedia CIRP, Issue 55, 2016, Page(s) 59-64, ISSN 2212-8271 Publisher: ELSEVIER DOI: 10.1016/j.procir.2016.09.035 Searching for OpenAIRE data... There was an error trying to search data from OpenAIRE No results available
