Objetivo The flow of steel in the mould of continuous slab casting machines, which can be extremely complex, has a large impact on final product quality leading to entrainment of argon bubbles, powder and mould slag in the solidifying strand and in the worst case breakouts. The aims of the project are: the development of advanced simulation methods in addition to instrumentation systems; the detection and measurement of the flow of steel in the mould of slab casters using thermocouples and electromagnetic measuring devices. The impact of flow conditions and asymmetric flow on product quality will be investigated over the range of casting speeds and strand dimensions available to the partners. The wished aim is to display dynamically to operators the flow of steel in the mould and to highlight conditions deleterious to as-cast semi-finished product quality. Programa(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Tema(s) C3 - Casting and solidification Convocatoria de propuestas Data not available Régimen de financiación CSC - Cost-sharing contracts Coordinador BRITISH STEEL Aportación de la UE Sin datos Dirección 15, Marlebone Road NW1 5JD LONDON Reino Unido Ver en el mapa Coste total Sin datos Participantes (3) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo Betriebsforschungsinstitut des Verein Deutscher Eisenhüttenleute eV Alemania Aportación de la UE Sin datos Dirección Sohnstraße 65 40237 Düsseldorf Ver en el mapa Coste total Sin datos INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE Francia Aportación de la UE Sin datos Dirección Immeuble "PACIFIC", La Défense 7 11/13 Cours Valmy 92800 PUTEAUX Ver en el mapa Coste total Sin datos MEFOS, FOUNDATION FOR METALLURGICAL RESEARCH Suecia Aportación de la UE Sin datos Dirección Aronstorpsvägen 1 971 25 LULEÅ Ver en el mapa Coste total Sin datos