Objetivo This project has the aims to improve and to extend the process observation and control system from a nearly terminated ECSC project on AOD converter control, as well as to extend and to apply refractory wear modelling from an earlier ECSC project on refractory performance in the AOD converter. The optimal time for switching the inert gas from nitrogen to more expensive argon shall be determined by on-line simulation of nitrogen pick-up and prediction of subsequent denitrogenation, in order to decrease the argon consumption and to adjust the final steel nitrogen content more accurately. The knowledge of the development of different kinds of refractory wear in the converter will allow to build a model which enables to find the best set of refractory materials and to define converter operating practices with reduced refractory consumption. Programa(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Tema(s) C2 - Secondary steelmaking Convocatoria de propuestas Data not available Régimen de financiación CSC - Cost-sharing contracts Coordinador Betriebsforschungsinstitut des Verein Deutscher Eisenhüttenleute eV Aportación de la UE Sin datos Dirección Sohnstraße 65 40237 Düsseldorf Alemania Ver en el mapa Coste total Sin datos Participantes (3) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo CENTRO SVILUPPO MATERIALI SPA Italia Aportación de la UE Sin datos Dirección Via di Castel Romano 100/102 00128 ROMA EUR Ver en el mapa Coste total Sin datos THYSSENKRUPP ACCIAI SPECIALI TERNI Italia Aportación de la UE Sin datos Dirección Viale B. Brin, 218 05100 TERNI Ver en el mapa Coste total Sin datos THYSSENKRUPP NIROSTA GMBH Alemania Aportación de la UE Sin datos Dirección Oberschlesienstrasse 16 47807 KREFELD Ver en el mapa Coste total Sin datos