Objetivo In this process the strip is guided round a cylindrical conductor roll (cathode) surrounded by a cylindrical consumable anode. the distance between the two electrodes is of the order of 20 to 30 mm (minimum energy loss). The guiding principles of this cell are as follows:high turbulence + high transfer + high current density + compact cell + compact line.The work will be broken down into three stages:(1) study and construction of the line,(2) study of the coating of can-type material (Sn, Cr, and Ni), (3) study of the coating of automotive material (Zn and Zn alloys). The work in phase 2 will consist of the following:(1) determining the effect of strip width variations,(2) minimizing the pumping energy required for high turbulence, (3) studying the shape and type of the cathode roll,(4) examining the importance of the risk of spark formation. Each phase could last one year. Programa(s) ECSC-STEELDEM 1C - Programme (ECSC) "pilot and demonstration projects in the iron and steel industry", 1983-1987 Tema(s) T3 - Rolling and product treatment Convocatoria de propuestas Data not available Régimen de financiación Data not available Coordinador HOOGOVENS RESEARCH AND DEVELOPMENT Aportación de la UE Sin datos Dirección 1970 CA IJMUIDEN Países Bajos Ver en el mapa Coste total Sin datos