Skip to main content

HEIMDALL - MULTI-HAZARD COOPERATIVE MANAGEMENT TOOL FOR DATA EXCHANGE, RESPONSE PLANNING AND SCENARIO BUILDING

Deliverables

Service Platform Design and Specification - Draft

Design document for the Service Platform.

User Interface Design - Final

Design document for the HEIMDALL user interfaces

Business Model Spreadsheet, Business Plan and Sustainability Report - Issue 1

Draft report on the service roll-out and exploitation plan. Provision of a business plan and report of the sustainability of the services offered by HEIMDALL.

Communications to Remote Areas – Design and Specifications - Final

Design and Specifications document for the alerting gateway as well as the satellite terminals and protocols.

Project Website and Collaborative Platform Description

Description of the project website and e-platform used for HEIMDALL project results’ dissemination and consortium partners’ effective collaboration.

Scenario Management Implementation Report

Report on the implementation and pre-operationally implemented scenario management.

Situation Assessment and Decision Support Configuration

Description of the configuration of the situation assessment and decision support services (workflows, rules, thresholds).

Business Model Spreadsheet, Business Plan and Sustainability Report - Issue 2

Final report on the service roll-out and exploitation plan. Provision of a business plan and report of the sustainability of the services offered by HEIMDALL

HEIMDALL System Engineering Report - Issue 5

Describes the progress made during each release phase.

Legal Implications of Drone Use

This deliverable is aimed at investigating and discussing the legal implications and the possible challenges at EC level about the use of drones (or MAV in broader sense) in disaster management operations.

Scenario Specification, Scenario Management Specification and Scenario and Situation Metrics - Draft

Technical specification of format, content and metadata of scenarios; technical specification of the scenario management component; description of the metrics used for multi-dimensional comparison and matching of scenario and real-world information.

Situation Assessment, Decision Support and Scenario Matching – Updated Concepts

The products and services documented in D6.7, D6.10 and D6.14 have been implemented for the HEIMDALL system releases A-C and the final release. However, during the EUWs and intermediary discussions with the end users, further resp. refined user requirements have arisen. In T6.3, T6.4 and T6.5 we see potential for addressing some of these requirements by updated approaches and concepts. In this deliverable we want to document the updated Situation Assessment (T6.3), Decision Support (T6.4) and Scenario Matching (T6.5) approaches for strengthening end user capabilities.

EO Tools and Products – Specifications - Final

Technical specifications and architectures for the EO processing modules and products.

Analysis of Human Factor Involvement in the use of Autonomous Systems in DRR and Response and Specifications for User Requirements - Issue 2

Thorough analysis of human factors including empirical research with key stakeholders and input to the project requirements in the form of a list of points to consider in the development of the project.

HEIMDALL Requirements Report - Issue 2

Documents the system and technical requirements and their maintenance during the project duration.

HEIMDALL Demonstrations - Issue 1

Includes (1) Compilation of organisational documents and actions required to carry out Demonstrations on HEIMDALL Services and Products, (2) compilation of lessons learnt converted into Experiences to feed Scenario Management in T6.5 and (3) Description and synthesis of lessons learnt and feedback from end users and relate them to recommendations and conclusions for other WPs. First Issue will include a definition of a strategy to compile the lessons learnt.

Dissemination Activities Report - Issue 1

Description of activities carried out to disseminate HEIMDALL outcomes, products and services during the first half of the project.

Modelling and Simulation Services – Specifications - Final

Design document and specifications for the software modules to be used for multi-hazard modelling and simulation.

Case studies - Issue 2

Description of relevant study cases in Forest Fires, Landslide, Floods and Flash-floods hazards, focused in cross-border scenario, in a multi-disciplinary event, “request for assistance” situations, inter-organisational cooperation and population awareness.

Analysis of Societal Acceptance and Ethical Acceptability - Issue 2

Thorough analysis of societal acceptance and ethical acceptability including empirical research with key stakeholders and the general public. The output of this will be in the form of points to consider for the ethical use of the system which will be regularly checked. By M42 a detailed ethics report with information on acceptable use of the system in different scenarios will be available.

"D6.5 from ""Concept on Hazard, Scale and User-Specific Risk Assessment Information, Products and Service Workflows - Final"

Concept design for the development of specific risk assessment information, products and service workflows in line with D6.1.

Communications and Information Sharing – Specifications - Final

Technical report specifying the interfaces, the message formats and the protocols for peer-to-peer communication between end users, as well as the central coordination services.

Standardisation Activities Report - Issue 2

Report describing the standardisation activities carried out in the second half of the project.

User Guide - Draft

Guide for users describing the user interface and its features.

Interfaces for External and Existing Systems – Specifications - Draft

Design and technical specifications for the interfacing components to external data sources and existing end-users’ systems.

Case studies - Issue 1

Description of relevant study cases in Forest Fires, Landslide, Floods and Flash-floods hazards, focused in cross-border scenario, in a multi-disciplinary event, “request for assistance” situations, inter-organisational cooperation and population awareness.

Case studies - Issue 3

Description of relevant study cases in Forest Fires, Landslide, Floods and Flash-floods hazards, focused in cross-border scenario, in a multi-disciplinary event, “request for assistance” situations, inter-organisational cooperation and population awareness.

HEIMDALL Integration and Verification Report

Documenting the implemented integrated system, the test plan at system level and the outcome of the test plan, together with the system evaluation.

HEIMDALL Requirements Report - Issue 4

Documents the system and technical requirements and their maintenance during the project duration.

Analysis of Human Factor Involvement in the use of Autonomous Systems in DRR and Response and Specifications for User Requirements - Issue 1

Thorough analysis of human factors including empirical research with key stakeholders and input to the project requirements in the form of a list of points to consider in the development of the project.

Information Fusion, Situation Assessment and sCOP Specification and Implementation Report - Final

Design document, specification and implementation report of information fusion, situation assessment and the sCOP format.

Stakeholders Webinars

List of Webinars carried out among stakeholders and task leader, and brief summary of discussions and feedbacks gathered.

First Responders Data Module Design

Design of the module to aggregate applicable first responder data.

HEIMDALL System Architecture

Documents the HEIMDALL system and network architecture and identifies relevant interfaces.

EO Tools and Products – Specifications - Draft

Technical specifications and architectures for the EO processing modules and products.

Decision Support Specification and Implementation Report - Final

Design document, specification and implementation report of the decision support services.

HEIMDALL Requirements Report - Issue 3

Documents the system and technical requirements and their maintenance during the project duration.

HEIMDALL User’s Manual for End-Users

Final HEIMDALL user’s manual addressed to end-users.

Scenario Specification, Scenario Management Specification and Scenario and Situation Metrics - Final

Technical specification of format, content and metadata of scenarios; technical specification of the scenario management component; description of the metrics used for multi-dimensional comparison and matching of scenario and real-world information.

Analysis of Societal Acceptance and Ethical Acceptability - Issue 3

Thorough analysis of societal acceptance and ethical acceptability including empirical research with key stakeholders and the general public. The output of this will be in the form of points to consider for the ethical use of the system which will be regularly checked. By M42 a detailed ethics report with information on acceptable use of the system in different scenarios will be available.

Analysis of Societal Acceptance and Ethical Acceptability - Issue 1

Thorough analysis of societal acceptance and ethical acceptability including empirical research with key stakeholders and the general public. The output of this will be in the form of points to consider for the ethical use of the system which will be regularly checked. By M42 a detailed ethics report with information on acceptable use of the system in different scenarios will be available.

HEIMDALL Requirements Report - Issue 1

Documents the system and technical requirements and their maintenance during the project duration.

User Guide - Final

Guide for users describing the user interface and its features.

HEIMDALL System Engineering Report - Issue 3

Describes the progress made during each release phase.

Concept Design for Risk Analysis Methods and Components – Updated Cascading Effects approach

The effects of cascading effects on the vulnerability of local communities was addressed and documented in D6.1. As stated by end-users, the modelled vulnerability assessment could be useful on a strategic level during the planning or training phase. However, according to end-users feedback there still is the need of assessing potential cascading effects during response actions due to changes in hazard dynamics or hazard intensity that enforce them to split resources in the field. This deliverable will outline updated concepts on the assessment of cascading effects based on the gaps so identified.

Service Platform Design and Specification - Final

Specification for the Service Platform.

HEIMDALL System Engineering Report - Issue 2

Describes the progress made during each release phase.

Users and Roles Management Specifications - Final

Specification document for the user/role management modules, their interfaces and interactions.

Communications and Information Sharing – Specifications

Technical report specifying the interfaces, the message formats and the protocols for peer-to-peer communication between end users, as well as the central coordination services.

Project Handbook

This deliverable describes the HEIMDALL project management and quality assurance procedures to be followed throughout the project.

Concept Design and Technical Specification for Risk Analysis Methods and Components

Detailed concept design and documentation of technical specifications for methods on risk analysis.

Information Fusion, Situation Assessment and sCOP Specification and Implementation Report - Draft

Design document, specification and implementation report of information fusion, situation assessment and the sCOP format.

HEIMDALL Requirements Report - Issue 5

Documents the system and technical requirements and their maintenance during the project duration.

Communications to Remote Areas – Design and Specifications - Draft

Design and Specifications document for the alerting gateway as well as the satellite terminals and protocols.

In-Situ Sensors – Specifications - Final

Specifications and technical details for the MAV swarm, the SAR radar and the in-situ sensors to be used.

User Interface Design - Draft

Design document for the HEIMDALL user interfaces.

Standardisation Activities Report - Issue 1

Report describing the standardisation activities carried out in the first half of the project.

Users and Roles Management Specifications - Draft

Specification document for the user/role management modules, their interfaces and interactions.

Interfaces for External and Existing Systems – Specifications - Final

Design and technical specifications for the interfacing components to external data sources and existing end-users’ systems.

HEIMDALL Demonstrations - Issue 3

Includes (1) Compilation of organisational documents and actions required to carry out Demonstrations on HEIMDALL Services and Products, (2) compilation of lessons learnt converted into Experiences to feed Scenario Management in T6.5 and (3) Description and synthesis of lessons learnt and feedback from end users and relate them to recommendations and conclusions for other WPs.

Decision Support Specification and Implementation Report - Draft

Design document, specification and implementation report of the decision support services.

Concept on Hazard, Scale and User-Specific Risk Assessment Information, Products and Service Workflows - Draft

Concept design for the development of specific risk assessment information, products and service workflows in line with D6.1.

Dissemination Activities Report - Issue 2

Description of activities carried out to disseminate HEIMDALL outcomes, products and services during the second half of the project. Issue 2 includes an analysis of HEIMDALL presence and impact in new media (Twitter, Facebook, Periscope).

In-Situ Sensors – Specifications - Draft

Specifications and technical details for the MAV swarm, the SAR radar and the in-situ sensors to be used.

HEIMDALL System Engineering Report - Issue 4

Describes the progress made during each release phase.

Modelling and Simulation Services – Specifications - Draft

Design document and specifications for the software modules to be used for multi-hazard modelling and simulation.

Service Concept Specification

Describes the HEIMDALL actors, roles, use cases and specifies the service concept.

HEIMDALL System Engineering Report - Issue 1

Describes the system engineering and release approach (Issue 1) and the progress made during each release phase.

HEIMDALL Demonstrations - Issue 2

Includes (1) Compilation of organisational documents and actions required to carry out Demonstrations on HEIMDALL Services and Products, (2) compilation of lessons learnt converted into Experiences to feed Scenario Management in T6.5 and (3) Description and synthesis of lessons learnt and feedback from end users and relate them to recommendations and conclusions for other WPs.

Analysis of Human Factor Involvement in the use of Autonomous Systems in DRR and Response and Specifications for User Requirements - Issue 3

Thorough analysis of human factors including empirical research with key stakeholders and input to the project requirements in the form of a list of points to consider in the development of the project.

Searching for OpenAIRE data...