Skip to main content

Novel modular stack design for high pressure PEM water electrolyzer technology with wide operation range and reduced cost

Deliverables

Project website

Project public website devoted to dissemination and communication. The website will be regularly updated

Summary report on public workshop

Materials, notes and conclusions of the public workshop.

Report of electrochemical evaluation of coated components

Report with the results of corrosion measurements and parameters icorr Ecorr etc as well as crosssection SEM images of the coatings

Final Report

Final report comprising the description of the main ST results potential impact and main dissemination activities following the Horizon 2020 reporting guidelines

Midterm report

Midterm report comprising the description of the interim S&T results, potential impact and main dissemination activities following the Horizon 2020 reporting guidelines

Report on the physical characterization of anode electrocatalysts

Report with the OER kinetic parameters of the Iraerogel and commercial PtC catalysts and physical characterization XRD TEM XPS etc

Compliance test protocols and analytics

Definition of test protocols for corrosion, catalytic kinetic, physical property testing etc. and material characterization

Summary report on material and component manufacturing process

Report on experiences regarding each manufacturing process and description of solutions to questions occurred during the work on each individual task

Plan for use and dissemination of foreground

Report lays down the draft plan for dissemination and communication activities and the use of foreground

Report of performance and durability of components in LP electrolyzer

Report with Ecell vs. j and Ecell vs t characteristics, EIS of PEM electrolyzer tests (25-100 cm2 active area) and MEA post mortem analyses

Final plan for use and dissemination of foreground

Report lays down the final plan for dissemination and communication activities and the use of foreground

Technical update on project fact sheet

Description and illustration of the project ambitions, approach, main results and key-messages, updated according to the stage of the project.

Project fact sheet

Description and illustration of the project ambitions, approach, main results and key-messages.

Searching for OpenAIRE data...

Publications

Doped tin oxide aerogels as oxygen evolution reaction catalyst supports

Author(s): Lluís Solà-Hernández, Fabien Claudel, Frédéric Maillard, Christian Beauger
Published in: International Journal of Hydrogen Energy, 44/45, 2019, Page(s) 24331-24341, ISSN 0360-3199
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.ijhydene.2019.07.152

Porous Transport Layers for Proton Exchange Membrane Electrolysis Under Extreme Conditions of Current Density, Temperature, and Pressure

Author(s): Svenja Stiber, Harald Balzer, Astrid Wierhake, Florian Josef Wirkert, Jeffrey Roth, Ulrich Rost, Michael Brodmann, Jason Keonhag Lee, Aimy Bazylak, Wendelin Waiblinger, Aldo Sau Gago, Kaspar Andreas Friedrich
Published in: Advanced Energy Materials, 11/33, 2021, Page(s) 2100630, ISSN 1614-6832
Publisher: Wiley-VCH Verlag
DOI: 10.1002/aenm.202100630

A modular design approach for PEM electrolyser systems with homogeneous operation conditions and highly efficient heat management

Author(s): F.J. Wirkert, J. Roth, S. Jagalski, P. Neuhaus, U. Rost, M. Brodmann
Published in: International Journal of Hydrogen Energy, 2019, ISSN 0360-3199
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.ijhydene.2019.03.185

Insight into the Mechanisms of High Activity and Stability of Iridium Supported on Antimony-Doped Tin Oxide Aerogel for Anodes of Proton Exchange Membrane Water Electrolyzers

Author(s): V. A. Saveleva, L. Wang, O. Kasian, M. Batuk, J. Hadermann, J.-J. Gallet, F. Bournel, N. Alonso-Vante, G. Ozouf, C. Beauger, K. J. J. Mayrhofer, S. Cherevko, A. S. Gago, K. A. Friedrich, S. Zafeiratos, E. R. Savinova
Published in: ACS Catalysis, 10/4, 2020, Page(s) 2508-2516, ISSN 2155-5435
Publisher: American Chemical Society
DOI: 10.1021/acscatal.9b04449

Electrochemical Evaluation of Niobium Corrosion Resistance in Simulated Anodic PEM Electrolyzer Environment

Author(s): Andrea Kellenberger
Published in: International Journal of Electrochemical Science, 15, 2020, Page(s) 10664-10673, ISSN 1452-3981
Publisher: Electrochemical Science Group, University of Belgrade
DOI: 10.20964/2020.11.47

Webpage of the project

Author(s): Consortium of PRETZEL project
Published in: 2018
Publisher: Consortium of PRETZEL project