Periodic Reporting for period 2 - DEFLECT (DEvelopment of Functionalizable materiaLs for Electrical CabineTs)
Période du rapport: 2019-02-01 au 2020-07-31
This project has been focused on the functionalization of composite materials for the manufacturing of electrical cabinets to be used for hosting and protecting on-board electrical and avionic devices. This functionalization has been performed embedding electric/mechanic elements inside the composite laminate during the manufacturing process of the laminate. The final aim is to replace the current approach based on Nomex panels with all the electric components mounted on the surface of the different panels forming the cabinet. All the requirements/functions of the cabinet have been maintained in the novel concept. Additional benefits are reduction of the mass and volume of the final cabinet, reduction of the overall cost (manufacturing and assembly) of the equipment and reduction of the complexity of the final assembly.
The main advantage of the strategies developed in DEFLECT project comes from an important reduction in the number of steps required in the manufacturing process, the simplicity of the procedure, reduction in the hand labour and assembly and, as consequence, in cost."
In the first stage of the project, embedment / encapsulation trials and simple testing for evaluation of all the preselected materials (REACH Compliant) and configurations were carried out. With the selected materials, detailed material characterization and validation was performed. The material has been subjected to an exhaustive validation campaign according to RTCA-DO-160 standard. All the tests have been successfully accomplished. Indicated requirements have been fulfilled. It is noteworthy the fire performance of the system: flammability, smoke and toxicity and optical density and the ISO 2685 standard (15 minutes) tests have been passed. Once the materials have been validated, the detailed design and manufacturing of each of the panels that form the Electrical Cabinet has been carried out.
As a result, versatile strategies to integrate elements such as bus bars, wires, optical fibres, connectors, inserts, etc, have been successfully developed. Multifunctional structural panels have been obtained. Solutions developed are enabling technologies for multiple applications.
If only the weight of the panel is considered, solutions are not lighter than the current Nomex panel used for the manufacturing of light cabinets. But the new material is more resistant, more damage tolerant and features a very high embedding ability. Considering the mass of additional elements required in the traditional solution such as attachments, screws, etc (the whole system), the approaches developed in DEFLECT are very competitive. A smaller cabinet could be manufactured and a mass saving of around 5 to 10 % has been estimated.
Considering that many components are directly placed during the manufacturing of the laminate, this will also facilitate assembly operations reducing cost and the probability e.g. of improper connection of the hardware.
Notes about the project have been included in the webpage of the Consortium and in “Estrategia” Magazine. In addition, outputs of the project were presented in the ICCST12 conference. A representative panel was going to be presented in the JEC World Paris 2020. However, this event has been cancelled due to COVID 19.
Currently, the possibility to patent the outcomes of DEFLECT project is being analyzed. Broad dissemination of results (paper, conference, etc) has been postponed up to having the result of the patent studies.
The results of this project have allowed IRT-SE improving its understanding of the physical phenomena behind the consolidation and the thermal stability of thermoset composites and to acquire a critical know-how in this field. These results will be then used to propose new project with the IRT Industrial and SME partners..
Knowledge gained in the project will strengthen TECNALIA’s position as a niche technology provider of advanced composite components. Lightweight composite housings are a major technology focus on TECNALIA. However, several other applications have already been identified where this new multifunctional material could play an important role for reducing mass and overall manufacturing cost..
DEFLECT project has worked and contributed to obtain mass savings and, as a consequence, a reduction of the Green House Gas (GHG) emissions.
Due to the very high embedding ability, the strategies developed in DEFLECT avoid the use of additional elements required in the traditional solution such as attachments, screws, etc. Hence, it can be concluded that the approaches developed in DEFLECT are lighter and very competitive. A TM’s estimation indicates 5 to 10 % of mass reduction.