Objective Electrical Environmental Control Systems (E-ECS) feature many low power electromechanical actuators to ensure control and tuning of items such as valves. They also include motorized turbomachines with power electrical motors.In both cases, the temperature class of coils integrated in motors or electromechanical actuators must be increased to minimize requested cooling and thus optimize both integration and mass of the system.So, these high temperature coils can be: A winding of electromagnet, a winding of a torque motor, a winding of a power electrical motor.The main objectives of this topic are:- to develop specific wires, impregnating varnishes and potting ingredients (resins) to have complete solutions for high temperature coil and qualify these ingredients,- to manufacture high temperature coils with these ingredients, integrate them in the Topic Manager’s defined application and demonstrate that the solutions proposed can be industrialized.The solutions shall comply with aeronautical constraints (electrical, vibration, lifetime, manufacturing process, etc.) and sustain a minimal temperature of 300°C. The main objectives of this topic are to develop specific wires, impregnating varnishes and potting ingredients (resins) to have complete solutions for high temperature coil and qualify these ingredients, to manufacture high temperature coils with these ingredients, integrate them in the Topic Manager’s defined application and demonstrate that the solutions proposed can be industrialized. Fields of science engineering and technologymechanical engineeringmanufacturing engineeringengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringcontrol systems Programme(s) H2020-EU.3.4. - SOCIETAL CHALLENGES - Smart, Green And Integrated Transport Main Programme H2020-EU.3.4.5.6. - ITD Systems Topic(s) JTI-CS2-2017-CFP06-SYS-03-11 - Screening and development of optimized materials (wires, potting resins and impregnating varnishes) for high temperature coils Call for proposal H2020-CS2-CFP06-2017-01 See other projects for this call Funding Scheme CS2-IA - Innovation action Coordinator LKR LEICHTMETALLKOMPETENZZENTRUM RANSHOFEN GMBH Net EU contribution € 61 823,75 Address Lamprechtshausenerstrasse 61 5282 Ranshofen Austria See on map Region Westösterreich Oberösterreich Innviertel Activity type Research Organisations Links Contact the organisation Opens in new window Website Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Other funding € 0,00 Participants (2) Sort alphabetically Sort by Net EU contribution Expand all Collapse all PEAK TECHNOLOGY GMBH Austria Net EU contribution € 200 748,63 Address Technologiepark strasse 6 4615 Holzhausen See on map SME The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed. Yes Region Westösterreich Oberösterreich Linz-Wels Activity type Private for-profit entities (excluding Higher or Secondary Education Establishments) Links Contact the organisation Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Other funding € 86 035,12 HPW METALLWERK GMBH Austria Net EU contribution € 235 522,88 Address Auwiesenstrasse 2 4030 Linz See on map Region Westösterreich Oberösterreich Linz-Wels Activity type Private for-profit entities (excluding Higher or Secondary Education Establishments) Links Contact the organisation Opens in new window Participation in EU R&I programmes Opens in new window HORIZON collaboration network Opens in new window Other funding € 100 938,37
