AIRFRAME ITD

Fatigue behaviour of notched additive manufactured Ti6Al4V with as-built surfaces

Author(s): M. Kahlin, H. Ansell, J.J. Moverare
Published in: International Journal of Fatigue, Issue 101, 2017, Page(s) 51-60, ISSN 0142-1123
Publisher: Elsevier BV
DOI: 10.1016/j.ijfatigue.2017.04.009

Fatigue behaviour of additive manufactured Ti6Al4V, with as-built surfaces, exposed to variable amplitude loading

Author(s): M. Kahlin, H. Ansell, J.J. Moverare
Published in: International Journal of Fatigue, Issue 103, 2017, Page(s) 353-362, ISSN 0142-1123
Publisher: Elsevier BV
DOI: 10.1016/j.ijfatigue.2017.06.023

High speed machining of the thin-walled aircraft constructions

Author(s): Paweł Bałon, Edward Rejman, Robert Smusz, Bartłomiej Kiełbasa
Published in: Mechanik, Issue 8-9, 2017, Page(s) 726-729, ISSN 0025-6552
Publisher: SIMP
DOI: 10.17814/mechanik.2017.8-9.105

Damage Detection in Composite Skin Stiffener with Hybrid PZT-FO SHM System

Author(s): Florian Lambinet, Zahra Sharif Khodaei
Published in: Key Engineering Materials, Issue 754, 2017, Page(s) 367-370, ISSN 1662-9795
Publisher: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.754.367

Structural Health Monitoring of Scarfed Repaired Composite Panels Using Inject-Printed Patterns

Author(s): D.G. Bekas, Zahra Sharif Khodaei, Ferri M.H. Aliabadi
Published in: Key Engineering Materials, Issue 774, 2018, Page(s) 235-240, ISSN 1662-9795
Publisher: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.774.235

Damage Detectability Model of Pitch-Catch Configuration in Composite Plates

Author(s): Nan Yue, Zahra Sharif Khodaei, Ferri M.H. Aliabadi
Published in: Key Engineering Materials, Issue 754, 2017, Page(s) 387-390, ISSN 1662-9795
Publisher: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.754.387

Smart Patch Repair with Low Profile PVDF Sensors

Author(s): Florian Lambinet, Zahra Sharif Khodaei
Published in: Key Engineering Materials, Issue 754, 2017, Page(s) 359-362, ISSN 1662-9795
Publisher: Trans Tech Publications
DOI: 10.4028/www.scientific.net/KEM.754.359

A Probabilistic Approach for Trade-off Analysis of Composite Wing Structures at the Conceptual Phase of Design

Author(s): Konstantinos Bacharoudis, Thomas Turner, Atanas Popov, Svetan Ratchev
Published in: Precision Assembly in the Digital Age, 2018, Page(s) pp 103-113, ISSN 1868-4238
Publisher: Springer Verlag

Continuous ultrasonic welding of thermoplastic composites: Enhancing the weld uniformity by changing the energy director

Author(s): Bram Jongbloed, Julie Teuwen, Genevieve Palardy, Irene Fernandez Villegas, Rinze Benedictus
Published in: Journal of Composite Materials, 2019, Page(s) 002199831989040, ISSN 0021-9983
Publisher: SAGE Publications
DOI: 10.1177/0021998319890405

Impact of Morphing Winglets on Aircraft Performance

Author(s): Cancino Queirolo, Mauricio Andrés (TU Delft Aerospace Engineering)
Published in: 2018
Publisher: Delft University of Technology

Holistically improving screening decisions under uncertainty in aircraft conceptual design and technology assessment

Author(s): Peerlings, Bram
Published in: 2019
Publisher: Delft University of Technology

Application of high speed machining technology in aviation

Author(s): Paweł Bałon, Janusz Szostak, Bartłomiej Kiełbasa, Edward Rejman, Robert Smusz
Published in: AIP Conference Proceedings volume 1960, 2018, Page(s) 070003
Publisher: American Institute of Physics (AIP)
DOI: 10.1063/1.5034899

Optical fibre based sensors application to structural health monitoring in composite materials

Author(s): M. Jiménez, F. Simón, S. Goosens, B. De Pauw, T. Geernaert, F. Berghmans, D. Habas
Published in: AEMAC, Issue 21/06/2017, 2017, Page(s) Vol 1, nº 1, pag 1-5
Publisher: AEMAC

Design of a Wireless Passive Sensing System for Impact Detection of Aerospace Composite Structures

Author(s): Hailing Fu, Aldyandra Hami Seno, Zahra Sharif Khodaei, M. H. Ferri Aliabadi
Published in: 2018 5th IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace), Issue Jun 20-22nd 2018, 2018, Page(s) 585-589, ISBN 978-1-5386-2474-6
Publisher: IEEE
DOI: 10.1109/MetroAeroSpace.2018.8453608

Bird strike analyses on RACER fast rotocraft

Author(s): Michael May, Thomas Haase, Yann Léost, Michael Wegmann, Martin Blacha
Published in: AIAA Scitech 2019 Forum, 2019, ISBN 978-1-62410-578-4
Publisher: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2019-1270

Conceptual design of disruptive aircraft configurations based on High-Fidelity OAD process

Author(s): Sebastien Defoort, Michaël Méheut, Bernard Paluch, Romain Liaboeuf, Raphaël Murray, Daniel C. Mincu, Jean-Michel David
Published in: 2018 Aviation Technology, Integration, and Operations Conference, 2018, ISBN 978-1-62410-556-2
Publisher: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-3663

Structural Health Monitoring using magnetostrictive sensors

Author(s): Z. Leung, A. Al-Taher, L. Chan, N. Walters, M. McGahan, S. Hayes, N. Lupu, I. Murgulescu, N. Morley
Published in: 2017 IEEE International Magnetics Conference (INTERMAG), 2017, Page(s) 1-1, ISBN 978-1-5386-1086-2
Publisher: IEEE
DOI: 10.1109/intmag.2017.8007893

Uncertainty-Based Design Optimization and Technology Evaluation: A Review

Author(s): Martijn Roelofs, Roelof Vos
Published in: 2018 AIAA Aerospace Sciences Meeting, 2018, ISBN 978-1-62410-524-1
Publisher: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2018-2029

Effects of tool design and welding parameters on the properties of dissimilar magnesium/aluminium friction stir welded lap joints

Author(s): E.Aldanondo; E.Arruti; I.Quintana
Published in: 5th International Conference on Scientific and Technical Advances on Friction Stir Welding & Processing, Issue 10, 2017
Publisher: Institut de Soudure and Arts et Métiers ParisTech
DOI: 10.5281/zenodo.2571435

Cost-effective HLFC design concept for transport aircraft

Author(s): Matthias Horn, Arne Seitz, Marvin Schneider
Published in: German Aerospace Conference, Issue 01.10.2019, 2019
Publisher: Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V.
DOI: 10.25967/490059

Automatically Generating the Technology Compatibility Matrix Using Graph Transformations

Author(s): Martijn N. Roelofs, Roelof Vos, Kristian Amadori, Christopher Jouannet
Published in: AIAA Aviation 2019 Forum, 2019, ISBN 978-1-62410-589-0
Publisher: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2019-2886

Transonic Flight and Movable Load Modelling for Wing-Box Preliminary Sizing

Author(s): Paul Lancelot and Roeland De Breuker
Published in: 2019
Publisher: IFASD

Structural design and testing of a tailored skin single duct (tssd) fin application

Author(s): Marvin Schneider, Matthias Horn, Stefan Ritt, Arne Seitz
Published in: 2018
Publisher: The International Council of the Aeronautical Sciences

The Effect of Maneuver Load Alleviation Strategies on Aircraft Performance Indicators

Author(s): Andrea Mancini, Roelof Vos
Published in: AIAA Aviation 2019 Forum, 2019, ISBN 978-1-62410-589-0
Publisher: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2019-3272

Formalizing Technology Descriptions for Selection During Conceptual Design

Author(s): Martijn N. Roelofs, Roelof Vos
Published in: AIAA Scitech 2019 Forum, 2019, ISBN 978-1-62410-578-4
Publisher: American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2019-0816

Numerical validation of gust response and numerical assessment of gust load alleviation for 2D aeroelastic profile in transonic conditions

Author(s): F. Huvelin, A. Lepage & C. Poussot-Vassal
Published in: 2017
Publisher: IFASD International Forum on Aeroelasticity and Structural Dynamics

Demonstration of innovative vibration control on a Falcon Business Jet

Author(s): C. Meyer, G. Broux, J. Prodigue, O. Cantinaud & C. Poussot-Vassal
Published in: 2017
Publisher: IFASD 2017 International Forum on Aeroelasticity and Structural Dynamics

Wind Tunnel Flutter Tests of a U-Tail configuration - Part 1: Model Design and Testing

Author(s): A. Geeraert, A. Lepage, P. Stephani, D. Feldmann & W. Häberli
Published in: 2017
Publisher: IFASD International Forum on Aeroelasticity and Structural Dynamics

RACER high-speed demonstrator: Rotor and rotor-head wake interactions with tail unit

Author(s): Caroline Lienard, Itham Salah el Din, Thomas Renaud, ONERA, The French Aerospace Lab; Raphaël Fukari, Airbus Helicopters
Published in: 2018
Publisher: AHS International 74th Annual Forum & Technology Display

Racer High-Speed Demonstrator: Tail Unit Vertical Fin Aerodynamic Design

Author(s): Itham Salah el Din, Caroline Lienard, ONERA, The French Aerospace Lab; Rémy Huot, Raphaël Fukari, Airbus Helicopters
Published in: 2018
Publisher: AHS International 74th Annual Forum & Technology Display

Attachment line transition control using passive and active devices

Author(s): M. Forte, G. Casalis, O. Vermeersch, C. François & E. Piot
Published in: 2017
Publisher: 52th International Conference on Applied Aerodynamics

Minimum weight structural optimisation procedure for the preliminary sizing of a composite wing of a compound helicopter

Author(s): Dr Andrea Cini
Published in: 2018
Publisher: Royal Aeronautical Society

Design for comfort: aircraft interiors design assessment through a human centered response model approach

Author(s): S. Bagassi, F. Lucchi, F. De Crescenzio
Published in: ICAS 2018 Conference Proceedings, 2018
Publisher: ICAS (International Council of the Aeronautical Sciences)

Experimental procedures for preliminary user centered evaluation of regional aircraft cabin interiors in virtual reality

Author(s): F. De Crescenzio, S. Piastra, S. Bagassi
Published in: AIDAA XXV International Congress, Issue every 2 years, 2019
Publisher: Associazione Italiana di Aeronautica ed Astronautica

Preliminary Design of Hydraulic and Pneumatic System Architectures for a Morphing Flight Control Structure

Author(s): Michael Schäfer, Andreas Schäfer, Oliver Bertram
Published in: SAE Technical Paper Series, 2019
Publisher: SAE International
DOI: 10.4271/2019-01-1916

Variable DC Bus Voltage Control Scheme for the More Electric Aircraft Power Generation System

Author(s): Seang Shen Yeoh, Mohamed Rashed, Serhiy Bozhko, Mike Sanders
Published in: 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC), 2018, Page(s) 1-6, ISBN 978-1-5386-4192-7
Publisher: IEEE
DOI: 10.1109/esars-itec.2018.8607758

An optimization framework for additive manufacturing given topology optimization results

Author(s): A. Wiberg, J. Persson, J. Ölvander
Published in: 2018
Publisher: Delft University of Technology

Automated Test System for Crack Growth Rates Evaluation on Advanced CFRP

Author(s): M. Jiménez, F. Moreno, R. Cabrera, D. Rodríguez, K. Muñoz and C. Arellano
Published in: 2018
Publisher: University of Patras

On the Validation and Use of High-Fidelity Numerical Simulations for Gust Response Analysis

Author(s): F. Huvelin, S. Dequand, A. Lepage & C. Liauzun
Published in: 2018
Publisher: Aerospace Lab

An Engineering Systems Graph Description Enabling Automated Analysis Mapping and Execution

Author(s): Martijn Roelofs, Roelof Vos
Published in: AIAA Aerospace Sciences Meeting, 2019
Publisher: AIAA

Design for Additive Manufacturing Using a Master Model Approach

Author(s): Anton Wiberg, Johan Persson, Johan Ölvander
Published in: Volume 2A: 45th Design Automation Conference, 2019, ISBN 978-0-7918-5918-6
Publisher: American Society of Mechanical Engineers
DOI: 10.1115/detc2019-97915

Mechanical characterization of advanced carbon fibre reinforced polymers for down selection of aero-structural materials

Author(s): K. Muñoz, T.S. Plagianakos, F. Moreno, M. Fernández, M. Jiménez, E. Karachalios
Published in: 2019
Publisher: AEMAC

Fusion bonding, Energy director, Polymer mesh, High frequency welding, Joining

Author(s): Bram Jongbloed, Julie Teuwen, Irene Fernandez Villegas, and Rinze Benedictus
Published in: 22nd International Conference on Composite Materials 2019; Melbourne, Australia, 2019
Publisher: N/A

Numerical studies on the influence of step-like surface irregularities on the development of Tollmien-Schlichting waves

Author(s): Stefan Hein, Franco Sumariva, Juan Alberto
Published in: 2019
Publisher: International Union of Theoretical and Applied Mechanics

Aerospace-grade compatible surface mounted optical fibre sensor for structural health monitoring of composite structures

Author(s): Sidney Goossens, Ben De Pauw, Thomas Geernaert, Mohammad Saleh Salmanpour, Zahra Sharif Khodaei, Hugo Thienpont, Francis Berghmans
Published in: Advanced Photonics 2018 (BGPP, IPR, NP, NOMA, Sensors, Networks, SPPCom, SOF), 2018, Page(s) BM3A.5, ISBN 978-1-943580-43-9
Publisher: OSA
DOI: 10.1364/bgppm.2018.bm3a.5

Friction Stir Welding of Lap Joints Using New Al–Li Alloys for Stringer-Skin Joints

Author(s): Egoitz Aldanondo, Ekaitz Arruti, Alberto Echeverria, Iñaki Hurtado
Published in: Friction Stir Welding and Processing X, 2019, Page(s) 77-88, ISBN 978-3-030-05751-0
Publisher: Springer International Publishing
DOI: 10.1007/978-3-030-05752-7_8

A Low-Cost Automated Fastener Painting Method Based on Machine Vision

Author(s): Ran Zhao, Adrien Drouot, Joseph Griffin, Richard Crossley, Svetan Ratchev
Published in: Precision Assembly in the Digital Age, 2018, Page(s) pp 92-100, ISSN 1868-422X
Publisher: Springer

An Evolution-Based High-Cycle Fatigue Constraint in Topology Optimization

Author(s): Shyam Suresh, Stefan B. Lindström, Carl-Johan Thore, Bo Torstenfelt, Anders Klarbring
Published in: EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization, 2019, Page(s) 844-854, ISBN 978-3-319-97772-0
Publisher: Springer International Publishing
DOI: 10.1007/978-3-319-97773-7_73

Fibre Bragg Gratings in Embedded Microstructured Optical Fibres Allow Distinguishing between Symmetric and Anti-Symmetric Lamb Waves in Carbon Fibre Reinforced Composites

Author(s): Ben De Pauw, Sidney Goossens, Thomas Geernaert, Dimitrios Habas, Hugo Thienpont, Francis Berghmans
Published in: Sensors, Issue 17/9, 2017, Page(s) 1948, ISSN 1424-8220
Publisher: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s17091948

An Innovative Diagnostic Film for Structural Health Monitoring of Metallic and Composite Structures

Author(s): Dimitrios Bekas, Zahra Sharif-Khodaei, M.H. Aliabadi
Published in: Sensors, Issue 18/7, 2018, Page(s) 2084, ISSN 1424-8220
Publisher: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s18072084

An Event-Triggered Energy-Efficient Wireless Structural Health Monitoring System for Impact Detection in Composite Airframes

Author(s): Hailing Fu, Zahra Sharif Khodaei, M. H. Ferri Aliabadi
Published in: IEEE Internet of Things Journal, 2018, Page(s) 1-1, ISSN 2327-4662
Publisher: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/JIOT.2018.2867722

Intrinsic flame resistance of polyurethane flexible foams: Unexpectedly low flammability without any flame retardant

Author(s): Carl-Christoph Höhne, Ronny Hanich, Edwin Kroke
Published in: Fire and Materials, Issue 42/4, 2018, Page(s) 394-402, ISSN 0308-0501
Publisher: John Wiley & Sons Inc.
DOI: 10.1002/fam.2504

Magnetostrictive Materials for aerospace applications

Author(s): A. Al-Taher, R.W. Reiss, A.D. Lafferty, S.A. Hayes, N. Lupu, I. Murgulescu, N.A. Morley
Published in: Journal of Physics: Conference Series, Issue 903, 2017, Page(s) 012010, ISSN 1742-6588
Publisher: Institute of Physics
DOI: 10.1088/1742-6596/903/1/012010

Development of new environmentally friendly anticorrosive surface treatments for new Al-Li alloys protection within the frame of Clean Sky2

Author(s): A. Karanika, N. Vourdas, A. Makrikostas, R. Marini, Th. Plagianakos, S. Kalogeropoulos
Published in: Procedia Structural Integrity, Issue 10, 2018, Page(s) 66-72, ISSN 2452-3216
Publisher: Elsevier
DOI: 10.1016/j.prostr.2018.09.010

Gust Load Alleviation: Identification, Control, and Wind Tunnel Testing of a 2-D Aeroelastic Airfoil

Author(s): Charles Poussot-Vassal, Fabrice Demourant, Arnaud Lepage, Dominique Le Bihan
Published in: IEEE Transactions on Control Systems Technology, Issue 25/5, 2017, Page(s) 1736-1749, ISSN 1063-6536
Publisher: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tcst.2016.2630505

Development and evaluation of poly(dimethylsiloxane) based composite coatings for icephobic applications

Author(s): Junpeng Liu, Jie Wang, Luca Mazzola, Halar Memon, Tamal Barman, Barbara Turnbull, Giuseppe Mingione, Kwing-So Choi, Xianghui Hou
Published in: Surface and Coatings Technology, Issue 349, 2018, Page(s) 980-985, ISSN 0257-8972
Publisher: Elsevier BV
DOI: 10.1016/j.surfcoat.2018.06.066

Human centred design and evaluation of cabin interiors for business jet aircraft in virtual reality

Author(s): Francesca De Crescenzio, Sara Bagassi, Severine Asfaux, Nigel Lawson
Published in: International Journal on Interactive Design and Manufacturing (IJIDeM), Issue 13/2, 2019, Page(s) 761-772, ISSN 1955-2513
Publisher: Springer Verlag
DOI: 10.1007/s12008-019-00565-8

Aerospace-grade surface mounted optical fibre strain sensor for structural health monitoring on composite structures evaluated against in-flight conditions

Author(s): Sidney Goossens, Ben De Pauw, Thomas Geernaert, Mohammad Saleh Salmanpour, Zahra Sharif Khodaei, Evangelos Karachalios, Diego Saenz-Castillo, Hugo Thienpont, Francis Berghmans
Published in: Smart Materials and Structures, Issue 28/6, 2019, Page(s) 065008, ISSN 0964-1726
Publisher: Institute of Physics Publishing
DOI: 10.1088/1361-665x/ab1458

A Statistical Energy Analysis (SEA) model of a fuselage section for the prediction of the internal Sound Pressure Level (SPL) at cruise flight conditions

Author(s): Giuseppe Petrone, Giacomo Melillo, Aurelio Laudiero, Sergio De Rosa
Published in: Aerospace Science and Technology, Issue 88, 2019, Page(s) 340-349, ISSN 1270-9638
Publisher: Elsevier BV
DOI: 10.1016/j.ast.2019.03.032

Assessment of CNT-doping and hot-wet storage aging effects on Mode I, II and I/II interlaminar fracture toughness of a UD Graphite/Epoxy material system

Author(s): Theofanis S. Plagianakos, Kirsa Muñoz, Gerard Guillamet, Vasileios Prentzias, Adrià Quintanas-Corominas, Miguel Jimenez, Evangelos Karachalios
Published in: Engineering Fracture Mechanics, Issue 224, 2020, Page(s) 106761, ISSN 0013-7944
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.engfracmech.2019.106761

EEG Alpha Power Is Modulated by Attentional Changes during Cognitive Tasks and Virtual Reality Immersion

Author(s): Elisa Magosso, Francesca De Crescenzio, Giulia Ricci, Sergio Piastra, Mauro Ursino
Published in: Computational Intelligence and Neuroscience, Issue 2019, 2019, Page(s) 1-18, ISSN 1687-5265
Publisher: Hindawi Publishing Corporation
DOI: 10.1155/2019/7051079

Experimental Assessment of the Effect of Temperature Gradient Across an Aeroacoustic Liner

Author(s): F. Méry, E. Piot, D. Sebbane, P. Reulet, F. Simon, A. Carazo Méndez
Published in: Journal of Aircraft, Issue 56/5, 2019, Page(s) 1809-1821, ISSN 1533-3868
Publisher: AIAA
DOI: 10.2514/1.c035157

Magnetostrictive Sensors for Composite Damage Detection and Wireless Structural Health Monitoring

Author(s): Zhaoyuan Leong, William Holmes, James Clarke, Akshay Padki, Simon Hayes, Nicola A. Morley
Published in: IEEE Transactions on Magnetics, Issue 55/7, 2019, Page(s) 1-6, ISSN 0018-9464
Publisher: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tmag.2019.2899537

In-Situ Damage Evaluation of Pure Ice under High Rate Compressive Loading

Author(s): Isakov, Lange, Kilchert, May
Published in: Materials, Issue 12/8, 2019, Page(s) 1236, ISSN 1996-1944
Publisher: MDPI Open Access Publishing
DOI: 10.3390/ma12081236

Energy saving strategy for the development of icephobic coatings and surfaces

Author(s): Yan Zheng, Jie Wang, Junpeng Liu, Kwing-So Choi, Xianghui Hou
Published in: Thin Solid Films, Issue 687, 2019, Page(s) 137458, ISSN 0040-6090
Publisher: Elsevier Sequoia
DOI: 10.1016/j.tsf.2019.137458

Comparison of Constrained Parameterisation Strategies for Aerodynamic Optimisation of Morphing Leading Edge Airfoil

Author(s): Andrea Magrini, Ernesto Benini, Rita Ponza, Chen Wang, Hamed Khodaparast, Michael Friswell, Volker Landersheim, Dominik Laveuve, Conchin Contell Asins
Published in: Aerospace, Issue 6/3, 2019, Page(s) 31, ISSN 2226-4310
Publisher: Aerospace
DOI: 10.3390/aerospace6030031

In-situ icing and water condensation study on different topographical surfaces

Author(s): Halar Memon, Junpeng Liu, Nicola Weston, Jie Wang, Davide S.A. De Focatiis, Kwing-So Choi, Xianghui Hou
Published in: Cold Regions Science and Technology, Issue 165, 2019, Page(s) 102814, ISSN 0165-232X
Publisher: Elsevier BV
DOI: 10.1016/j.coldregions.2019.102814

Hydrophobic/icephobic coatings based on thermal sprayed metallic layers with subsequent surface functionalization

Author(s): Junpeng Liu, Jie Wang, Halar Memon, Yifan Fu, Tamal Barman, Kwing-So Choi, Xianghui Hou
Published in: Surface and Coatings Technology, Issue 357, 2019, Page(s) 267-272, ISSN 0257-8972
Publisher: Elsevier BV
DOI: 10.1016/j.surfcoat.2018.10.002

Experimental and numerical investigations of a 2D aeroelastic airfoil encountering a gust in transonic conditions

Author(s): Fabien Huvelin, Arnaud Lepage, Sylvie Dequand
Published in: CEAS Aeronautical Journal, Issue 10/4, 2019, Page(s) 1101-1120, ISSN 1869-5582
Publisher: Springer Science + Business Media
DOI: 10.1007/s13272-018-00358-x

Conceptual-level evaluation of a variable stiffness skin for a morphing wing leading edge

Author(s): C Wang, H Haddad Khodaparast, MI Friswell, A Magrini, R Ponza, E Benini, V Landersheim, D Laveuve, C Contell Asins
Published in: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Issue 233/15, 2019, Page(s) 5703-5716, ISSN 0954-4100
Publisher: Mechanical Engineering Publications Ltd.
DOI: 10.1177/0954410019855576

Damage Detection and Characterization in Composites Using a Geometric Modification of the RAPID Algorithm

Author(s): Guillermo Azuara, Eduardo Barrera, Mariano Ruiz, Dimitrios Bekas
Published in: IEEE Sensors Journal, Issue 20/4, 2020, Page(s) 2084-2093, ISSN 1530-437X
Publisher: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jsen.2019.2950748

Design for additive manufacturing – a review of available design methods and software

Author(s): Anton Wiberg, Johan Persson, Johan Ölvander
Published in: Rapid Prototyping Journal, Issue 25/6, 2019, Page(s) 1080-1094, ISSN 1355-2546
Publisher: Emerald Group Publishing Ltd.
DOI: 10.1108/rpj-10-2018-0262

Topology optimization using a continuous-time high-cycle fatigue model

Author(s): Shyam Suresh, Stefan B. Lindström, Carl-Johan Thore, Bo Torstenfelt, Anders Klarbring
Published in: Structural and Multidisciplinary Optimization, Issue 61/3, 2020, Page(s) 1011-1025, ISSN 1615-147X
Publisher: Springer Verlag
DOI: 10.1007/s00158-019-02400-w

Penalty regulation of overhang in topology optimization for additive manufacturing

Author(s): C.-J. Thore, H. Alm Grundström, B. Torstenfelt, A. Klarbring
Published in: Structural and Multidisciplinary Optimization, Issue 60/1, 2019, Page(s) 59-67, ISSN 1615-147X
Publisher: Springer Verlag
DOI: 10.1007/s00158-019-02194-x

Variable-Voltage Bus Concept for Aircraft Electrical Power System

Author(s): Seang Shen Yeoh, Mohamed Rashed, Mike Sanders, Serhiy Bozhko
Published in: IEEE Transactions on Industrial Electronics, Issue 66/7, 2019, Page(s) 5634-5643, ISSN 0278-0046
Publisher: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tie.2018.2883276

Super-Hydrophobic/Icephobic Coatings Based on Silica Nanoparticles Modified by Self-Assembled Monolayers

Author(s): Junpeng Liu, Zaid Janjua, Martin Roe, Fang Xu, Barbara Turnbull, Kwing-So Choi, Xianghui Hou
Published in: Nanomaterials, Issue 6/12, 2016, Page(s) 232, ISSN 2079-4991
Publisher: MDPI
DOI: 10.3390/nano6120232

The application of thin-walled integral constructions in aviation as exemplified by the SAT-AM project

Author(s): Paweł Bałon, Andrzej Świątoniowski, Bartłomiej Kiełbasa, Edward Rejman, Janusz Szostak, Robert Smusz, Łukasz Kowalski
Published in: MATEC Web of Conferences, Issue 304, 2019, Page(s) 01026, ISSN 2261-236X
Publisher: MATEC
DOI: 10.1051/matecconf/201930401026

Sensor Optimization For Impact Detection: A Bayesian Approach

Author(s): V. Mallardo, Z. Sharif Khodaei, M.H. Aliabadi
Published in: VIII ECCOMAS Thematic Conference on Smart Structures and Materials, SMART 2017, Issue 2017-09-11, 2017
Publisher: -

Precision Assembly in the Digital Age - 8th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2018, Chamonix, France, January 14—16, 2018, Revised Selected Papers

Author(s): Richard Crossley, Svetan Ratchev
Published in: 2019, ISBN 978-3-030-05931-6
Publisher: Springer
DOI: 10.1007/978-3-030-05931-6

Aerospace Assembly Gap Measurement Using Low Cost Smart Tools with Machine Vision

Author(s): Richard Crossley, Svetan Ratchev
Published in: 2019
Publisher: Springer

Publications

Intellectual Property Rights

Share this page Share this page on social networks

Download Download the content of the page