Skip to main content

Eco-Design Transverse Activity GAM 2018

Deliverables

D&C Plan 2019

Dissemination and Communication Plan 2019 for ecoDESIGN related activities, Workshops, Fairs, Conferences, Flyers, Videos, and other social media Event plannings.

Dissemination and Communication Plan 2018

The Dissemination and Communication Plan 2018 will provide an overview about all Dissemination and communication activities on ecoDESIGN planned in 2018

Publications

Life cycle assessment – A tool to eco-design structural composite parts

Author(s): Thomas Reichert, Ana Salles
Published in: AIP Conference Proceedings volume 1981, Issue Biannual, 2018, Page(s) 020140
DOI: 10.1063/1.5046002

Comparing the environmental impacts of different bio-oils in the production of bio-based Polyurethane aircraft seats - an eco-design Approach within the Clean Sky programme

Author(s): Ana Salles, Nathalia Freire
Published in: 1st Life Cycle Innovation Conference, Issue Annual, 2018, Page(s) 5

New environmentally friendly anti corrosive surface Treatments for New Al-Li Alloys protection in CS2

Author(s): Alexandra Karanika
Published in: 2018

CS Eco-Design - The Way to greener Aviation

Author(s): Thomas Reichert
Published in: 2018

Consideration of ecolabel in the selection of bio-based material for aircraft seating cushion - an LCA case study from the Clean Sky programme

Author(s): Ana Salles
Published in: 2018

Comparing the environmental Impacts of different bio-oils in the production of biobased Polyurethane aircraft seats - an eco-design Approach within the Clean Sky programme

Author(s): Ana Salles Nathalia Freire
Published in: 2018

Life Cycle Assessment of a 3D printed Cabin Partition Wall with bionic Design

Author(s): Bastian Schäfer
Published in: 2018

LCA of aircraft seating: an example of Eco-design Transversal Activity in Clean Sky

Author(s): Ana Salles
Published in: 2018

Presentation Session on Greener Skies Ahead in Aviation

Author(s): Rainer Schweppe
Published in: 2018

Efficient Future Factory

Author(s): Bernd Mayer
Published in: 2018

Advanced Machining and Additive Manufacturing for ecoDESIGN

Author(s): Neyir Sevilmis
Published in: 2018

Fraunhofer Aviation Conference on ILA Berlin (2018) - ecoDESIGN and Sustainable Productivity

Author(s): Rainer Schweppe
Published in: 2018

Case studies on materials and sensors configuration in thermal convection to suggest an alternative engineering vantage in the face of digital problem growth

Author(s): Erhard Mayer (Fraunhofer IBP) John Simpson (Fraunhofer)
Published in: E-proceedings (Online & USB) of the 7th edition of the International Symposium on Air/Craft Materials (ACMA), 24-26 April, 2018, Compiègne, France., Issue Biannual, 2018

Recycling strategies of carbon reinforced polymer Composites 7th edition of the International Symposium on Air/Craft Materials (ACMA), 24-26 April, 2018, Compiègne, France.

Author(s): Norbert Leiss, Christian Kaiser, Volker Thome, Rainer Schweppe, Rudolf Emmerich, Torsten Mueller
Published in: ACMA 2018 E-proceedings (Online & USB), Issue Biannual, 2018

Potential and the barriers for recycling of carbon fibre reinforced composites in transportation field

Author(s): Torsten Müller
Published in: CFRP Recycling Workshop, Issue 2019, 2019

ecoDESIGN

Author(s): Andreas Büter
Published in: Clean Sky 2 Workshop on SHM, Issue 20/11/2019, 2019

Clean Sky ecoDESIGN  - Sustainable developments for a greener Aviation

Author(s): Rainer Schweppe
Published in: ECCOMAS Thematic Conference on Smart Materials & Systems, Issue 9th Conference, 8-12 July 2019, 2019

ecoDESIGN and Sustainable Productivity

Author(s): Rainer Schweppe
Published in: Clean Sky Public-Private Partnership – European aeronautics research at its best: What next in Horizon Europe?, Issue 10/04/2019, 2019, Page(s) Day 2

The future is full of promises

Author(s): John Simpson
Published in: ecoDESIGN Symposium 2019, Issue 10/09/2019, 2019

Interpreting LCA results from a life cycle and circular economy perspective: Application of the Life Cycle Gap-Analysis

Author(s): Michael Dieterle
Published in: SETAC Europe, Issue 29th Annual Meeting, 26-30 May 2019, 2019

VliesRTM - Reuse of carbon fiber waste in composite structures

Author(s): Fabian Albrecht
Published in: EASN Conference, Issue 9th, 03-06/09/2019, 2019

Next Generation Product(Ion)..!? Manufacturing Turbomachinery Components In A Digital Environment

Author(s): Sascha Gierlings
Published in: EASN Conference, Issue 9th Conference, 03-06/09/2019, 2019

Turbomachinery Manufacturing in a Digital Environment

Author(s): Sascha Gierlings
Published in: ASME Turbo Expo 2019, 2019

Clean Sky Research Topics

Author(s): Rainer Schweppe Thomas Reichert
Published in: 2018

Hybrid Manufacturing

Author(s): Rudolph Emmerich
Published in: 2018

Fraunhofer Aviation

Author(s): Rainer Schweppe Torsten Moll John Simpson
Published in: 2018

Innotesting - Testverfahren für Bauteile aus Additiver Fertigung Poster Presentation Clean Sky - The way to greener aviation

Author(s): Thomas Reichert
Published in: 2019

Clean Sky 2 Workshop on Additive Manufacturing in Aviation

Author(s): Torsten Moll, Thomas Reichert, Rainer Schweppe, Andres Gasser, Jerome Lery, Antonio Hernandez, Vottorio Selmin, Paolo Trinchieri
Published in: ecoDESIGN MPR Workshop series, Issue 23-24/04/2019, 2019

Intrinsic flame resistance of polyurethane flexible foams: Unexpectedly low flammability without any flame retardant

Author(s): Carl-Christoph Höhne, Ronny Hanich, Edwin Kroke
Published in: Fire and Materials, Issue 42/4, 2018, Page(s) 394-402, ISSN 0308-0501
DOI: 10.1002/fam.2504