European Commission logo
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS

MIGOSA - Image Sensor for low light Camera Applications

Description du projet

Un capteur d’images à très faible luminosité aux portes de la commercialisation

Les capteurs photosensibles électroniques ont remplacé les films dans les appareils photo numériques. Malgré leur utilisation généralisée depuis des décennies, leur capacité à conserver une qualité d’image satisfaisante dans des conditions de faible luminosité est médiocre. La société Pixpolar Oy, basée en Finlande, a mis au point et breveté un nouveau type de capteur d’images appelé MIG (modified internal gate), qui procure une meilleure qualité d’image dans des conditions de faible luminosité que les technologies de capteurs d’images existantes. Les caméras équipées de capteurs d’images MIG étendent la plage de détection maximale d’un facteur de 1,6 et sont insensibles aux interférences électromagnétiques. Le projet MIGOSA, financé par l’UE, entend tester plus avant ces capteurs d’images MIG à faible luminosité et les mener sur la voie de la commercialisation. Les capteurs pourraient être utilisés dans des caméras de sécurité/surveillance et de vision nocturne dans de nombreuses industries.

Objectif

Challenge: One of the biggest global challenges in the low-light camera applications e.g. in the video
surveillance is the need to significantly improve image quality and identification in low light. Even software
enhanced low light images remain blurred and are unsuited to automated image-recognition demonstrating
the need to develop more efficient image sensors.
Solution: Cameras with Pixpolar’s low light image sensor (MIG technology) capture both visible light and
Near Infra-Red (NIR) light that cannot be seen with the naked eye. Cameras equipped with MIG image sensors extend 1.6 times the maximum detection range compared to existing technology. It allows superior identification of objects, and is immune to interference. It also allows a 80% reduction in illumination cost or 60% reduction in the number of cameras required for area surveillance at cost lower than the cost of present technology. A prototype MIG pixel has been made, tested and validated.
Business opportunity: MIG image sensor is a game changing technology. The advantages of the MIG
technology enables Pixpolar to enter the large global image sensor market (USD 15.2B by 2020). The MIG
technology was demonstrated in Horizon 2020 Phase 1 to many camera producers and camera end
users. They all saw great market opportunity in embedding MIG image sensors in their cameras. A solid
business case can be secured by targeting first 5-10 camera manufacturers, from which further business
expansion can be nurtured. In February 2018 the business case was also endorsed by an investment of 2 million EUR from an international investor consortium.
The purpose of the MIGOSA project: To accomplish test production of low light MIG image sensors and to start the commercialization of the image sensors. This will open the large business potential in the fields of Security and Surveillance (S&S), night vision, maritime and scientific markets as well as later in the automotive, aviation, drone, industrial, and medical markets.

Appel à propositions

H2020-EIC-SMEInst-2018-2020

Voir d’autres projets de cet appel

Sous appel

H2020-SMEInst-2018-2020-2

Régime de financement

SME-2 - SME instrument phase 2

Coordinateur

PIXPOLAR OY
Contribution nette de l'UE
€ 2 072 262,50
Adresse
OTAKAARI 5
02150 ESPOO
Finlande

Voir sur la carte

PME

L’entreprise s’est définie comme une PME (petite et moyenne entreprise) au moment de la signature de la convention de subvention.

Oui
Région
Manner-Suomi Helsinki-Uusimaa Helsinki-Uusimaa
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Liens
Coût total
€ 2 960 375,00