Skip to main content

Composite fan Aerodynamic, Aeroelastic, and Aeroacoustic VAlidation Rig


Plan for the Exploitation and Dissemination of Results

Plan for dissemination and exploitation of project results

LTF Mechanical Design and instrumentation setup

Mechanical design of the LSF test article and its instrumentation for aerodynamic aeroelastic and aeroacoustic tests in PTF

Literature review and LTF aero design requirements

Report describing the literature study

LTF performance and instability analysis, LTF mechanical design requirements

Report describing the outputs of tasks 2.2, 2.3 and 2.4, and summarizing the resulting requirements for the mechanical design of LTF to be performed in WP 3 (Report, PU).

Data Management Plan

This report addresses the relevant aspects of making data findable, accessible, interoperable and re-usable, including what data the project will generate, whether and how it will be made accessible for verification and re-use, and how it will be curated and preserved

Searching for OpenAIRE data...


Aerodynamic Analysis of a scaled UHBR Fan

Author(s): Natale N., Egger T., Friedrichs J., Russo S.
Published in: IOP Conf. Series: Materials Science and Engineering, Mater. Sci. Eng. 1226 012007, 2022
Publisher: IOP Publishing
DOI: 10.1088/1757-899x/1226/1/012007

The preliminary design of a scaled Composite UHBR Fan for a wind tunnel test campaign

Author(s): Paletta N., Flüh J., Lindemann J., Seume J., Goessling J., Friedrichs J., Eggers T., Russo S., Natale N., Vlachos D., Mazarakos D., Baltopoulos A., Vavouliotis A.
Published in: IOP Conf. Series: Materials Science and Engineering, 1226 (2022) 012041, 2022
Publisher: IOP Publishing
DOI: 10.1088/1757-899x/1226/1/012041

Composite UHBR Fan for Forced Response and Flutter Investigations

Author(s): T. Eggers, J. Friedrichs, J. Gößling, J. Seume, N. Natale, J. P. Flüh, N. Paletta
Published in: ASME 2021 Turbomachinery Technical Conference & Exposition TURBO EXPO 2021, GT2021-58941, June 07-11, 2021, 2021, ISBN 978-0-7918-8490-4
Publisher: ASME
DOI: 10.1115/gt2021-58941

CA3ViAR: a step forward towards modelling and testing aerodynamic and aeroelastic instabilities experienced by Low Transonic Fans made of composite material

Author(s): N. Paletta, E. Vecchio (IBK), J. Gößling, M. Amer, J. R. Seume (LUH), J. Friedrichs, T. Eggers (TUBS), S. Russo, N. Natale (DREAM)
Published in: "10th EASN International Conference on ""Innovation in Aviation & Space to the Satisfaction of the European Citizens""", Annual Conference, 2020
Publisher: IOP Publishing Ltd