Deliverables Documents, reports (17) Innovative SOCs manufacturing routes Report about requirements of the innovative SOCs manufacturing routes Optimized SOCs Optimized SOCs through innovativedeposition of barrier layer Structural, morphological and electrochemical analyses of SOCs Report on the structural morphological and electrochemical analyses of SOCs Plan for Communication & Dissemination updated, 2 Draft Plan for Communication Dissemination updated Final report Industrial targets Definition of the industrial targets Report on the electrochemical performance Report on the electrochemicalperformance of novel and robustelectrodes Performances of single cells Report on performances of single cells Electrokinetic analysis Report on electrokinetic analysis of EIS by physical modeling simulation for H2O electrolysis and rSOC operations Environmental assessment report Environmental assessment report of the new SOC materials and processing routes Test matrix Test matrix and protocol definition Optimized fabrication parameters for 3D printing Report about optimized fabricationparameters for 3D printing large areaSOCs Performances and durability of short stacks Report on performances and durability of short stacks Plan for Communication & Dissemination updated, 1 Draft Plan for Communication & Dissemination updated Mid-term report Midterm report Proposed design of deposition system for industrial scaling-up Report on proposed design of deposition system for industrial scalingup 3D print sputtering and ALD Set of recommendations Set of recommendations to progress SOC beyond NewSOC Websites, patent fillings, videos etc. (1) Management Tools Management Tools (templates etc.) available on the web site Open Research Data Pilot (1) Data Management Plan Data Management Plan established Publications Peer reviewed articles (20) Hole polarons in LaFeO3 and La1−xSrxFeO3−δ: Stability, trapping, mobility, effect of Sr concentration, and oxygen vacancies Author(s): C. Hartmann, J. Laurencin, and G. Geneste Published in: Physical Review B, Issue 107, 2023, Page(s) 024104, ISSN 2469-9969 Publisher: American Physical Society DOI: 10.1103/physrevb.107.024104 Effect of Steam to Carbon Dioxide Ratio on the Performance of a Solid Oxide Cell for H2O/CO2 Co-Electrolysis Author(s): Bimpiri, N., Konstantinidou, A. Tsiplakides, D., Balomenou, S., Papazisi, K.M. Published in: Nanomaterials, Issue 13 (2), 2023, Page(s) 299, ISSN 1687-4129 Publisher: MDPI DOI: 10.3390/nano13020299 Electrical characterization of glass-ceramic sealant-metallic interconnect joined samples under solid oxide electrolysis cell conditions; influence on the microstructure and composition at the different polarized interfaces Author(s): Hassan Javed, Kai Herbrig, Antonio Gianfranco Sabato, Domenico Ferrero, Massimo Santarelli, Christian Walter, Federico Smeacetto Published in: Ceramics International, Issue 47/6, 2021, Page(s) 8184-8190, ISSN 0272-8842 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.ceramint.2020.11.176 Enhancement of the intrinsic Ni/GDC activity under rSOC operation by means of Fe–Au doping: An electro-kinetic study Author(s): F. Zaravelis, D.K. Niakolas Published in: International Journal of Hydrogen Energy, 2023, ISSN 0360-3199 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.ijhydene.2023.06.034 A multiscale model validated on local current measurements for understanding the solid oxide cells performances Author(s): E. Da Rosa Silva, G. Sassone, M. Prioux, M. Hubert, B. Morel, J. Laurencin Published in: Journal of Power Sources, Issue 556, 2023, Page(s) 232499, ISSN 0378-7753 Publisher: Elsevier BV DOI: 10.1016/j.jpowsour.2022.232499 The promoting effect of Fe on Ni/ GDC for the Solid Oxide H 2 O electrolysis Author(s): Charalampos Neofytidis, Evangelia Ioannidou, Maria Kollia, Stylianos G. Neophytides, Dimitrios K. Niakolas Published in: International Journal of Energy Research, Issue 44/13, 2020, Page(s) 10982-10995, ISSN 0363-907X Publisher: John Wiley & Sons Inc. DOI: 10.1002/er.5837 Understanding the Ni Migration in Solid Oxide Cell: A Coupled Experimental and Modeling Approach Author(s): Léa Rorato, Yijing Shang, Shenglan Yang, Maxime Hubert, Karine Couturier, Lijun Zhang, Julien Vulliet, Ming Chen, Jérôme Laurencin Published in: Journal of The Electrochemical Society, Issue 170, 2023, Page(s) 034504, ISSN 1945-7111 Publisher: The Electrochemical Society DOI: 10.1149/1945-7111/acc1a3 Transition metals in Ni/GDC for the reversible solid oxide cell operation: Optimization of the Mo-Au-Ni synergy and further enhancement via substitution of Mo with Fe Author(s): F. Zaravelis, L. Sygellou, A. Soyvalioti and D.K. Niakolas Published in: Electrochimica Acta, Issue 453, 2023, Page(s) 142343, ISSN 0013-4686 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.electacta.2023.142343 Effect of the PH2O/PCO2 and PH2 on the intrinsic electro-catalytic interactions and the CO production pathway on Ni/GDC during solid oxide H2O/CO2 co-electrolysis Author(s): E. Ioannidou, M. Chavani, S.G. Neophytides, D.K. Niakolas Published in: Journal of Catalysis, Issue 404, 2021, Page(s) 174-186, ISSN 0021-9517 Publisher: Academic Press DOI: 10.1016/j.jcat.2021.09.024 Torsional behaviour of glass-joined, laser-processed Crofer 22 APU interconnect: Unravelling the effect of surface roughness on the shear strength Author(s): F. Smeacetto; E. Zanchi; D. Meena Narayana Menon; D. Janner; S. Lamnini; M. Salvo; S. De La Pierre; H. Javed; M. Ferraris Published in: Ceramics International, Issue 48, 2022, Page(s) 32837-32843, ISSN 0272-8842 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.ceramint.2022.07.210 Electrode kinetics of porous Ni-3YSZ cermet operated in fuel cell and electrolysis modes for solid oxide cell application Author(s): Federico Monaco, Elisa Effori, Maxime Hubert, Elisabeth Siebert, Gregory Geneste, Bertrand Morel, Elisabeth Djurado, Dario Montinaro, Jérôme Laurencin Published in: Electrochimica Acta, Issue 389, 2021, Page(s) 138765, ISSN 0013-4686 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.electacta.2021.138765 An Elementary Kinetic Model for the LSCF and LSCF-CGO Electrodes of Solid Oxide Cells: Impact of Operating Conditions and Degradation on the Electrode Response Author(s): E. Effori, J. Laurencin, E. Da Rosa Silva, M. Hubert, T. David, M. Petitjean, G. Geneste, L. Dessemond, E. Siebert Published in: Journal of The Electrochemical Society, Issue 168/4, 2021, Page(s) 044520, ISSN 0013-4651 Publisher: Electrochemical Society, Inc. DOI: 10.1149/1945-7111/abf40a Electrophoretic deposition of MnCo2O4 coating on Solid Oxide Cell interconnects manufactured through powder metallurgy Author(s): Zanchi E., Sabato A. G., Monterde M. C., Bernadet L., Torrell M., Calero J. A., Tarancón A., Smeacetto F. Published in: Materials & Design, Issue 227, 2023, Page(s) 111768, ISSN 0264-1275 Publisher: Elsevier BV DOI: 10.1016/j.matdes.2023.111768 Large Area Deposition by Radio Frequency Sputtering of Gd0.1Ce0.9O1.95 Buffer Layers in Solid Oxide Fuel Cells: Structural, Morphological and Electrochemical Investigation Author(s): Coppola, N.; Polverino, P.; Carapella, G.; Ciancio, R.; Rajak, P.; Dario, M.; Martinelli, F.; Maritato, L.; Pianese, C. Published in: Materials, Issue 14, 2021, Page(s) 5826, ISSN 1996-1944 Publisher: MDPI Open Access Publishing DOI: 10.3390/ma14195826 The promoting effect of Fe on Ni/ GDC for the Solid Oxide H 2 O electrolysis Author(s): Charalampos Neofytidis, Evangelia Ioannidou, Maria Kollia, Stylianos G. Neophytides, Dimitrios K. Niakolas Published in: International Journal of Energy Research, 2020, ISSN 0363-907X Publisher: John Wiley & Sons Inc. DOI: 10.1002/er.5837 Low Temperature Performance and Durability of Solid Oxide Fuel Cells with Titanate Based Fuel Electrodes Using Reformate Fuel Author(s): Christensen, J. O., Sudireddy, B. R., & Hagen, A. Published in: Journal of The Electrochemical Society, Issue 170, 2023, Page(s) 024515, ISSN 1945-7111 Publisher: The Electrochemical Society DOI: 10.1149/1945-7111/acbb31 3D printing the next generation of enhanced solid oxide fuel and electrolysis cells Author(s): Arianna Pesce, Aitor Hornés, Marc Núñez, Alex Morata, Marc Torrell, Albert Tarancón Published in: Journal of Materials Chemistry A, Issue 8/33, 2020, Page(s) 16926-16932, ISSN 2050-7488 Publisher: Royal Society of Chemistry DOI: 10.1039/d0ta02803g Novel SrO-Containing Glass-Ceramic Sealants for Solid Oxide Electrolysis Cells (SOEC): Their Design and Characterization under Relevant Conditions Author(s): Hassan Javed; Elisa Zanchi; Fabiana D’Isanto; Chiara Bert; Domenico Ferrero; Massimo Santarelli; Federico Smeacetto Published in: Materials, Issue 15 (17), 2022, Page(s) 5805, ISSN 1996-1944 Publisher: MDPI Open Access Publishing DOI: 10.3390/ma15175805 Large Area Solid Oxide Fuel Cells with room temperature sputtered barrier layers: the role of the layer thickness and uniformity in the enhancement of the electrochemical performances and durability Author(s): N. Coppola, H. S.U. Rehman, G. Carapella, P. Polverino, D. Montinaro, F. Martinelli, V. Granata, A. Galdi, L. Maritato, C. Pianese Published in: International Journal of Hydrogen Energy, 2023, ISSN 0360-3199 Publisher: Pergamon Press Ltd. DOI: 10.1016/j.ijhydene.2023.04.170 Printability of carboxymethyl cellulose/glass-containing inks for robocasting deposition in reversible solid oxide cell applications Author(s): Soukaina Lamnini; Francesco Baino; Giorgia Montalbano; Hassan Javed; Federico Smeacetto Published in: Materials Letters, Issue 318, 2022, Page(s) 132239, ISSN 0167-577X Publisher: Elsevier BV DOI: 10.1016/j.matlet.2022.132239 Searching for OpenAIRE data... There was an error trying to search data from OpenAIRE No results available