A COMBINED NUMERICAL-EXPERIMENTAL APPROACH TO THE SIMULATION OF HOT DEFORMATION OF METALS.

Project Information

Grant agreement ID: BREU0175

Project closed

Start date 1 August 1990

End date 31 July 1993

Funded under

• Specific research and technological development programme (EEC) in the fields of industrial manufacturing technologies and advanced materials applications (BRITE/EURAM), 1989-1992

Total cost No data

EU contribution No data

Coordinated by

University of Wales, Swansea
United Kingdom

Objective

The primary objective of the research project is to develop a combined numerical-experimental technique, based on inverse finite element approaches and the visioplasticity method, for indirect evaluation of stresses at the tool-workpiece interface during bulk metal forming operations.

This will lead to developments in advanced frictional models to be used in numerical simulations, which are becoming necessary for the design of new forming technologies and optimization of existing ones.

Programme(s)

• FP2-BRITE/EURAM 1 - Specific research and technological development programme (EEC) in the fields of industrial manufacturing technologies and advanced materials applications (BRITE/EURAM), 1989-1992

Topic(s)

Data not available

Call for proposal

Data not available

Funding Scheme

Data not available

Coordinator

University of Wales, Swansea

• EU contribution: No data
• Address: Singleton Park ; SA2 8PP Swansea ; United Kingdom
• Total cost: No data

Participants (2)

TECHNISCHE UNIVERSITAET CLAUSTHAL

Germany

• EU contribution: No data
• Address: ADOLPH-ROEMER-STRASSE 2A ; 1253 CLAUSTHAL-ZELLERFELD
• Total cost: No data

Universidad Politecnica de Cataluna

Spain

• EU contribution: No data
• Address: 08001 BARCELONA
• Total cost: No data