Skip to main content

ON-LINE MODULAR MULTI SENSOR INSPECTION SYSTEM FOR COMPOSITES AND CERAMIC COATED MATERIAL

Objective

The objectives of this project is to provide a demonstration device with the basic functions and capabilities of an on-line modular multi sensor inspection system for carbon fibre composites (CFC) and ceramic coated material (CCM).

The on-line modular multi sensor inspection system (OMMSIS) will be realized with optronic, electromagnetic and ultrasonic sensor techniques including an appropriate scanning device, on-line signal processing, automatic or menu-driven operation, correlation and assessment of defects as well as a powerful graphic presentation of the results.

The project is defined as follows :
(1)definition, production/selection and preparation of test specimens with and without defects;
(2)development and adaptation of optronic, electromagnetic (ED, DC, MMW) and ultrasonic (SAFT) methods for surface and volumetric inspection of CFC (including anisotropic layered material) and CCM;
(3)integration of the inspecting systems by a data system and control unit for defect correlation and assessment;
(4)demonstration of trials with the demonstration device OMMSIS.

Leaflet | Map data © OpenStreetMap contributors, Credit: EC-GISCO, © EuroGeographics for the administrative boundaries

Coordinator

STM/MSG
Address
Hunefeldstraße 1-5
2800 Bremen
Germany

Participants (4)

FRAUNHOFER-GESELLSCHAFT ZUR FOERDERUNG DER ANGEWANDTEN FORSCHUNG E.V.
Germany
Address
Universitaet, Gebaeude 37
66123 Saarbruecken
Italcompositi SpA
Italy
Address
Ponte Del Tremio
03012 Anagni Frosinone
METRAVIB RECHERCHE DÉVELOPPEMENT SERVICE SA
France
Address
Chemin Des Ormeaux 200
69760 Limonest
Universität Gesamthochschule Kassel
Germany
Address

3500 Kassel