Skip to main content

Beltsaw blades qualities improvement thanks to a new tungsten carbide coating sprayed by hvof thermal projection technique

Objective



The aim of our approach is the development of a new tungsten carbide coating, when applied thanks to HVOF (High Velocity Oxygen Fuel) process on the cutting edge of blades, will improve the useful lifetime of the tool. Our work will consist in: - research of the carbide composition, - research of the best HVOF parameters, - design of the coating process, - defining the best use criteria for the treated blade, - can-ying out industrial tests in sawmills. Belt saw blades are used today: - without coatings against wear on the teeth, - with a stellite coating. In spite of the improvement contributed by stellite protection, the deterioration time of the cutting edge, and the re-grinding of the blade, remains a penalising factor for the sawmill profession. This situation generates: - a loss in quality of sawn-up items, resulting in an abnormal volume of sawdust and wood loss due to poor shaping of planks (this could represent up to 3,5% of the raw material costs), - a loss in production as a result of reduction in cutting speeds and stock, as well as machine stoppages, - a considerable intervention costs, associated with various operations of blade repair (regrinding, flattening or stellite protection), and even purchase of new blades. The economic gains that the new approach will allow are the following: -Origin-Economic gain -Saw dust reduction -1% of raw material cost -Wasted ends reduction-2 5% of raw material cost , -Productivity increase-5% -Saw blades maintenance costs decrease 20% Results of this study could be applied to various wood machining tools. This project is included in Brite Euram Areas. The subject covered by the proposal is Area 2: 2.1.1 S that is
Manufacturing, processing and recycling technologies at reduced cost for equal or increased functionality of existing engineering materials (e.g. steels, non ferrous metals, concrete, polymers, ceramics, timber and composites) and high added-value products
. Three other areas are covered by the proposal: 1. l .7 M, 2.1 .3.S and l .2.3.S.

Funding Scheme

CRS - Cooperative research contracts

Coordinator

M.F.L.S. FOREZIENNE S.A.
Address
Epercieux St. Paul
42110 Feurs
France

Participants (10)

Centre Technique du Bois et de l'Ameublement (CTBA)
France
Address
10 Avenue De Saint-mandé
75012 Paris
Commissariat l'Energie Atomique
France
Address
Ctr Etudes De Grenoble - Ce-g
38041 Grenoble
Ducerf S.A.
France
Address

71120 Vendenesse Les Charolles
Fabbrica Italiana Pallets SpA
Italy
Address
Via Provinciale 53
24050 Ghisalba Bergamo
First Italia Srl
Italy
Address
Strada Airauda 7
10044 Pianezza Torino
Georg Ziegler GmbH. 2 Co KG Steinhilber GmbH.
Germany
Address
134,Wilheimstrasse 134
89518 Heidenheim
Houthandel Boogaerdt B.V.
Netherlands
Address
88,Dorpsstraat 88
2930 AA Krimpen Aan De Lek
N.V. Bauwens Gaston S.A.
Belgium
Address
7,Nijverheidstraat 7
8730 Beernem
Seynaeve Bandsaws S.A.
Belgium
Address
4,Astenstraat 4
8551 Heestert
Universit degli Studi di Firenze
Italy
Address
Via San Bonaventura 13
50145 Firenze