Objective
TO FORMULATE CATALYSTS, ACTIVE FOR DIRECT OXIDATION OF METHANOL IN A FUEL CELL. THESE WILL CONSIST OF PLATINUM GROUP METALS ON AN OXIDE SUBSTRATE TO GIVE A SYNERGISTIC OXIDATIVE EFFECT, AND INCLUDE A STUDY OF CATALYST SYSTEMS DISPERSED ON AN INERT CARBON SUPPORT. PROMISING SYSTEMS WILL BE TESTED AS FUEL CELL ELECTRODES. THE FUEL CELLS COULD ULTIMATELY BE USED FOR A WIDE RANGE OF PURPOSES.
Research concerning the direct methanol fuel cell (DMFC) anode reaction has investigated the role of the carbon support, platinum and the cocatalyst, and the effect of the electrolyte composition and pH.
Platinum surface chemistry was found to be more complex than previously thought. It was proposed that more than type of platinum(11) oxide can be formed under load conditions, one form of which may act as a poison and one which can enhance methanol oxidation. Further, it has been shown that a significant acid catalysis effect occurs on platinum below about pH 3, suggesting that hydrous oxides may be involved in the catalytic process. A wide range of transition metal compounds including gas phase catalysts and hydrous base metal oxides have been screened for cocatalyst activity in an attempt to find a cheaper and/or more effective alternative to ruthenium. No real improvement over the platinum ruthenium system has been found, and this may reflect the possibility that provisions of 'active oxygen' is not rate limiting in the best of these electrodes. It is possible that oxidative chemisorption becomes the limiting step below about 0.3 V. Comprehensive in situ Fourier transform infrared (FTIR) spectroscopy studies have shown substantial differences in the nature of the adsorbed organic species between planar and dispersed platinum. In particular, the levels of the poison carbon monoxide appear to be much lower on the latter.
New ground has been broken in the use of catalysts based on the transition metal macrocycle compounds for electrooxidation. The use of these materials either as oxidation catalysts in their own right or as precursors for highly dispersed systems should prove a fruitful area for future development in electrocatalysis.
SUB-PROJECT 1. OXFORD.
- SUBSTRATE: MATERIAL SELECTION, PREPARATION, ACTIVATION
- BINDER: MATERIAL SELECTION, OPTIMIZATION OF BINDER - SUBSTRATE RATIO IN ELECTRODE FABRICATION
- ELECTROLYTE: SELECTION, OPTIMIZATION OF PH, FABRICATION OF 3-PHASE INTERFACE.
- CATALYST: SELECTION, DISPERSION ON SUBSTRATE, TESTING, MODIFICATION
- TESTING: INDIVIDUAL ELECTRODES, UNIT CELLS - IF APPROPRIATE.
SUB-PROJECT 2. OXFORD.
RESEARCH FOR CATALYST SELECTION.
- REQUIREMENTS OF CHEMICAL STABILITY
- SOURCE OF LOW-CURRENT LOSSES
- ELIMINATION OF SELF-POISONING
- IMPROVEMENT OF HIGH-CURRENT LOSSES
- NOBLE-METAL/OXIDE/SUBSTRATE SYNERGISMS
- ROLE OF COUNTER CATION IN ACTIVE OXIDES.
SUB-PROJECT 3. JOHNSON-MATTHEY.
CATALYST PREPARATION AND CHARACTERIZATION.
- SUBSTRATES: CHARACTERIZATION, SURFACE STUDIES
- CATALYST PREPARATIONS: SELECTION OF DEPOSITION METHODS, OPTIMISATION OF PREPARATIVE ROUTE
- CATALYST EVALUATION: PHYSICAL STUDIES, ELECTRON OPTICS ELECTROCHEMICAL EVALUATION
- ELECTRODES: SELECTION OF SUPPORT MATERIALS, POLYMER BINDERS, STUDY OF STRUCTURAL REQUIREMENTS, FABRICATION METHODS, PROBLEM OF SINTERING.
SUB-PROJECT 4. JOHNSON MATTHEY
ELECTRODE AND CELL TESTS, ENGINEERING ANALYSIS.
- ELECTRODE ACTIVITY TESTING - CONSTRUCTION OF TEST CELLS AND APPARATUS, ELECTRODE EVALUATIONS.
- DURABILITY TESTING: CONSTRUCT AND COMMISSION DURABILITY TEST CELLS AND ASSOCIATED EQUIPMENT, INCLUDING DATA ACQUISITION SYSTEM
- ELECTRODE TEST PROGRAMME: EVALUATION OF ELECTRODES SELECTED FROM ACTIVITY TESTS; - EFFECTS OF SINTERING.
FOLLOWING A MILESTONE AT 24 MONTHS:
- ENGINEERING ANALYSIS: EXAMINATION OF COMPETING SYSTEMS, APPLICATIONS STUDY, COST CONSIDERATIONS FOR MATERIALS AND FABRICATION.
- DIRECT METHANOL FUEL CELL: ELECTROLYTE PROPERTIES / VAPOUR PRESSURE, OPERATING TEMPERATURE, CARBON DIOXIDE REJECTION AND ELECTROLYTE WATER BALANCE. PRELIMINARY DESIGN STUDY.
- CONSTRUCTION OF UNIT CELLS.
Fields of science (EuroSciVoc)
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: The European Science Vocabulary.
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: The European Science Vocabulary.
- natural sciences chemical sciences inorganic chemistry inorganic compounds
- natural sciences chemical sciences catalysis electrocatalysis
- natural sciences chemical sciences inorganic chemistry transition metals
- natural sciences chemical sciences organic chemistry alcohols
- engineering and technology environmental engineering energy and fuels fuel cells
You need to log in or register to use this function
Programme(s)
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
Topic(s)
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Data not available
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Call for proposal
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
Data not available
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
Funding Scheme
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
Coordinator
OXFORD
United Kingdom
The total costs incurred by this organisation to participate in the project, including direct and indirect costs. This amount is a subset of the overall project budget.