Skip to main content

On-line process & quality optimisation for the manufacturing of cast metallic parts (QUME)

Objective

The project addresses two different problems in order to demonstrate a new technology (intensity calibrated X-radioscopy method and vibration analysis involving multiple sensors and resonance frequency) and new methodology for defect detection, classification and recognition:
i) intelligent manufacturing control during semi-solid casting and;
ii) inspection technology and data processing methodology to improve detection, efficiency and reliability of detection in general inspection tasks and particularly condition monitoring. The focus is on the complex process control case on semi-solid forming, aiming to reduce high scrap rates and quality problems by factor of 2.

Coordinator

CARL BRO A/S
Address
Egeskoven 222
2600 Glostrup
Denmark

Participants (8)

INNOSPEXION APS
Denmark
Address
Raunsbjergvej 10-12, Kisserup
4330 Hvalsoe
INSTITUT FUER GIESSEREITECHNIK GMBH
Germany
Address
70,Sohnstrasse 70
40237 Duesseldorf
INSTITUT NATIONAL DES SCIENCES APPLIQUEES DE LYON
France
Address
20,Avenue Albert Einstein 20, Insa Bètiment 303
69621 Villeurbanne
INSTITUTO DE SOLDADURA E QUALIDADE
Portugal
Address
Km 3,Av. Professor Doutor Cavaco Silva, N 33, Talaide,t
2780920 Oeiras
MONITION LTD (INTERNATIONAL)
United Kingdom
Address
Bondhay Complex, Whitwell Common, Whitwell
S80 3EH Worksop
RISOE NATIONAL LABORATORY
Denmark
Address
Frederiksborgvej 399
Roskilde
STAMPAL SPA
Italy
Address
Via Lombardia 6
10071 Borgaro Torinese
THE UNIVERSITY OF LIVERPOOL
United Kingdom
Address
Brownlow Hill
L69 3GJ Liverpool