Objective
The use of rapid prototyping models and simulation software in the precision foundry industry has brought distinct improvements in terms of time to market new products, cost savings, feeding design, opening of new markets etc. The main objective of this network is to promote the use of standard procedures for the use of these tools and to analyse the environmental issues related to the foundry industry. A special effort will be made to disseminate these results at a European level.
The approach to achieving these objectives is the creation of an European network with 20 experienced partners that will work in the following main workpackages:
i) Rapid prototyping;
ii) Simulation software;
iii) Environmental issues;
iv) Dissemination and exploitation of the results;
v) Management and coordination of the network.
Fields of science
Call for proposal
Data not availableFunding Scheme
THN - Thematic network contractsCoordinator
20009 San Sebastian
Spain
See on map
Participants (27)
7017 Rousse
See on map
71139 Ehningen
See on map
CF24 3TE Cardiff
See on map
S2 3PT Sheffield
See on map
1050 Bruxelles
See on map
92310 Sevres
See on map
00128 Roma
See on map
03440 Ibi-alicante
See on map
Modena
See on map
88100 Saint Die
See on map
03130 Spemberg
See on map
30 418 Krakow
See on map
08290 Cerdanyola Del Valles
See on map
86167 Augsburg
See on map
02015 Hut
See on map
NG7 2RQ Nottingham
See on map
1780 AM Den Helder
See on map
09221 Neukirchen (Erzgeb)
See on map
LE13 0PB Melton Mowbray
See on map
48901 Vizcaya - Baracaldo
See on map
7180 Seneffe
See on map
04523 Pegau
See on map
02044 Espoo
See on map
10040 Borgaretto Di Beinasco
See on map
7800 Skive
See on map
70049 Stuttgart
See on map
607 OSU Colchester
See on map