Objective
To reduce the cost of crystalline silicon wafers the project will study the operating conditions of a new prototype two table wire saw required to :
- slice multicrystalline silicon bricks with reduced silicon usage (wafer thickness + kerfloss)
-slice such bricks at higher speeds.
To reduce the cost of crystalline silicon wafers a study was made of the operating conditions of a new prototype 2-table wire saw. The saw is required to slice multicrystalline silicon bricks with reduced silicon usage (wafer thickness plus kerfloss) at high speeds.
The previous (1990) cutting speeds of 240 um min{1} for reached for 10 cm walls and 260 um min{1} 15 cm cells increased in 1991 to 330 um min{1} and 370 um min{1} respectively. The goal of 520 um min{1} could be attained in 1992. A reduction in wafer thickness from 170 to 150 um was achieved.
The work program will cover :
1) The characterisation of the wire and its wear in the course of the sawing operation.
2) The feasibility of surface treatment and composition changes of the steel wire to reduce its wear and eventually resulting in a more uniform wear.
3) The feasibility of using wire materials other than steel.
4) The testing of wires having diameters lower than the 175 microns presently used.
5) The optimisation of the cutting parameters (wire tension, wire and table speeds, feed and composition of the abrasive slurry) to :
a) maintain high wafering yields at wire pitches lowered from the present 400 microns down to 300 microns.
b) maintain high yields at lowered wire pitches when pushing the cutting speed (table speed) from 260 microns/minute to 520 microns per minute and while cutting simultaneously two ingots of 15 x 15 cm2 (one on each table) or four ingots of 10 x 10 cm2 (two each table).
6) Analysis of potential capacity improvements by:
a) alternate abrasive mixes usable under high heat fluxes
b) inducing controlled high frequency vibrations into the cutting head during operation
c) very high wire speeds
7) Analysis of effects on cutting capacity of small variations of silicon material hardness.
8) Final economical assessment of all the technical improvements considered.
Experimental phases of the program will be carried out in parallel by Photowatt and ENE by cutting respectively 10 x 10 cm2 and 15 x 15 cm2 wafers. The prototype machine is built by HCT for ENE and will remain at the HCT plant for a number of trials associated with paragraphs 4, 5, 6 and 7 of the program above.
Fields of science (EuroSciVoc)
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: The European Science Vocabulary.
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: The European Science Vocabulary.
You need to log in or register to use this function
Programme(s)
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
Topic(s)
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Data not available
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Call for proposal
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
Data not available
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
Funding Scheme
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
Coordinator
38300 Bourgoin-Jallieu
France
The total costs incurred by this organisation to participate in the project, including direct and indirect costs. This amount is a subset of the overall project budget.