Objetivo Spray drying is used to remove moisture and turn the product into a powder for storage or convenience. It is also used for micro encapsulation to give controlled release and other functions. In the usual open cycle configuration, spray dryers vent extracted water vapour directly to the open air, often with odours and particles, creating air pollution in the locality. Closed cycle spray dryers are operated in specialist applications but a general, low cost closed cycle spray drying technology is not in use. This project will develop a closed cycle spray dryer and demonstrate it in general drying and micro encapsulation applications. Novel technologies for dehumidification, heat recovery and removal of volatiles will be investigated to meet the objective of a low cost process, to replace existing open cycle spray dryers. This will have important benefits for Sees and larger end users in terms of reduced emissions, giving greater flexibility in the sitting of their operations. Ámbito científico engineering and technologyenvironmental engineeringair pollution engineeringnatural sciencesearth and related environmental sciencesenvironmental sciencespollution Programa(s) FP5-LIFE QUALITY - Specific Programme for research, technological development and demonstration on "Quality of life and management of living resources", 1998-2002 Tema(s) 1.1.1.-4. - Key action Environment and Health Convocatoria de propuestas Data not available Régimen de financiación EAW - Exploratory awards Coordinador SPRAY PROCESSES LTD. Aportación de la UE Sin datos Dirección Bunyan Road 86 Kempston MK42 8EX Bedford Reino Unido Ver en el mapa Coste total Sin datos Participantes (1) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo BODEC APPLIED INDUSTRIAL RESEARCH BV Países Bajos Aportación de la UE Sin datos Dirección Indutrieterrein't Zand Bedrijfsweg 1 5683 CM BEST Ver en el mapa Coste total Sin datos