Objective
This project aims to substitute cold strip for deep drawing applications by hot strip for economic, time saving and ecological reasons. For that a thin slab casting and direct rolling line shall be used. Ferritic rolling is a suitable rolling method for the necessary thin hot strips.
Starting with an ELC-grade two main processing routes shall be tested, which are high finishing rolling and coiling temperatures to get a soft and ductile hot strip for direct application and low finishing rolling and coiling temperatures to get a strained thin hot strip for direct annealing and hot dip galvanising.
Topic(s)
Data not availableCall for proposal
Data not availableFunding Scheme
Data not availableCoordinator
THYSSENKRUPP STEEL AG
EU contribution
No data
Total cost
No data