European Commission logo
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2024-04-15

DEVELOPMENT OF AN EXPERT SYSTEM FOR TOOL WEAR MONITORING IN MILLING, DRILLING AND BLANKING USING MULTI-SENSOR SYSTEMS, AND MACHINABILITY STUDIES USING ACOUSTIC EMISSION

Objectif


This project developed the specifications for an expert system (TEMOS) which is designed to detect tool breakage and provide in-process monitoring of progressive tool wear, for milling and blanking operations. The system is capable of 'learning' machinability criteria derived from AE analysis to adapt tool life prediction.

Other achievements of this project are: the building and evaluation of three different interferometers; the design of a torque and thrust sensor, based on a strain gauge dynamometer integrated in the drill tool holder; design of an acoustic emission sensor based on the criteria of the NBS conical transducer and the PVDF displacement transducer; an identification system which offers a procedure to evaluate the process state for every combination of conditions; machinability criteria which are derived from statistical analysis of the acoustic emission.
ONE OF THE MAIN AIMS OF AN FMS IS TO PERMIT UNMANNED OPERATION FOR CONSIDERABLE PERIODS OF TIME. THIS REQUIRES SENSING SYSTEMS WHICH CAN MONITOR TOOL WEAR AND BREAKAGE TO ENSURE THAT TOOLS ARE CHANGED BEFORE THERE IS A DETERIORATION IN WORKPIECE QUALITY, OR A DANGER OF DAMAGE TO THE MACHINE ITSELF.THE MAJOR AIM OF THIS PROJECT IS TO DEVELOP THE SPECIFICATIONS OF AN EXPERT SYSTEM FOR TOOL WEAR MONITORING IN MILLING, DRILLING AND BLANKING OPERATIONS. THE EFFECT OF TOOL WEAR ON FORCE, TORQUE, POWER OR CURRENT AND ACOUSTIC EMISSION PARAMETERS IN MILLING AND DRILLING OPERATIONS WILL BE INVESTIGATED, AND A TOOL-LIFE PREDICTION MODEL IS TO BE DERIVED. NEW INVESTIGATIONS WILL RESULT IN THE IMPROVED CONTROL OF BLANKING OPERATIONS.
A MACHINABILITY TEST BASED ON ACOUSTIC EMISSION WILL BE DEFINED. NOVEL MULTI-PARAMETER SENSORS WHICH ARE SUITABLY COMPACT, ROBUST AND NON-INVASIVE FOR USE IN THE MONITORING OF MACHINING AND METALWORKING OPERATIONS IN THE INDUSTRIAL ENVIRONMENT WILL BE DEVELOPED. THEY WILL BE BASED ON FIBRE-OPTIC AND LASER TECHNIQUES AND WILL BE INCORPORATED INTO THE EXPERT SYSTEM.

Thème(s)

Data not available

Appel à propositions

Data not available

Régime de financement

CSC - Cost-sharing contracts

Coordinateur

Centre Technique des Industries Mécaniques (CETIM)
Contribution de l’UE
Aucune donnée
Adresse
52 avenue Félix Louat
60304 Senlis
France

Voir sur la carte

Coût total
Aucune donnée

Participants (7)