Skip to main content
European Commission logo
English English
CORDIS - EU research results
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary
Content archived on 2022-12-27

PV SYSTEMS FOR AIRCRAFT ASSISTANCE DURING LANDING

Objective

To demonstrate the possibility to extend the use of visual approach indicator systems in secondary airports. To demonstrate, that a pv powered runway border lights system can reduce investment cost.

The pv systems supplies power to three different loads :
1) The PAPI system :
A PAPI system is a visual path indicator used in airports to provide the pilot of an approaching aircraft with the necessary informations for safe landing. It consists of four units placed in a line; each unit has three lamps at 200 W so the total load is 2400 W. Estimated consumption: 16 kWh per day.
The PAPI systems can also operate with a power supply by an (already existing) Diesel generator. (In fact two independent power sources are requested by the regulations.)
2) Runway lights :
The runway is equipped with 70 border lights of 36 W (white, blue, red and green, depending on their position). All lights can be switched on and off in four intensity steps from the tower. Estimated consumption: 5 kWh per day. 3) Parking area :
The power supply can also be used for lighting the aircraft parking space. 200 W sodium lamps. Estimated consumption: 5 kWh per day. Analytical monitoring (by PC and memory cards) is foreseen.
Nr. subsystems : 1
Power subsys. : 11700 Wp
Total power : 11700 Wp
Backup : grid
Nr. of modules : 260
Module descrip. : EUROSOLARE, type SL A2-P510, polycristalline, 46 Wp, front side tempered glass, back side Tedlar. 995 x 450 x 57 mm, 6 kg
Connection : Four subarrays, two with 6 parallel strings and two with 7 parallel strings of 10 series connected modules.
Support : on 26 racks, far away on the side of the runway, covering an area of about 12 x 23 m2, height: 300 mm above ground level at 45 deg. fixed tilt angle
Max. pwr. trckr : none
Chrg. controler : yes, but specs not available
Battery : FIAMM SMBF20/8
Battery-Voltage : 120V
Battery-Capacity : 930 Ah
Battery-Capacity : 111 kWh
Inverter : One inverter (SEI design, pulse width modulation, sinusoidal, 86% efficiency),
4.5 kVA (120 dc/230 ac) Load descript. : PAPI: twelve 200 W ac tungsten-halogen lamps. Runway lights: 70 lights 36 W ac (nominal 12 V, 3A) each. Parking lights: Low pressure sodium lamps, total 2000 W ac. Ten lamps connected in series. Monitoring : analytical monitoring by computer (hourly averages), battery voltage, current to battery, current to inverter, current from inverter, in-plane irridiation (LASTEM), ambient temperature.

Call for proposal

Data not available

Coordinator

Sistemi Energetici Integrati
EU contribution
No data
Address
VIA SAN JACOPO 32
50047 PRATO
Italy

See on map

Total cost
No data