Skip to main content

Out of autoclave processes development for composite frames manufacturing with high production rate and low cost.

Objective

The main objective of the COFRARE 2.0 project, answering to the call for proposal launched in WP B-4.3 will be to carry out process development for composite frames manufacturing with high production rate and low cost to provide a step forward in the development of aerostructures composite component for aircrafts such as Regional ones.
The project will contribute to the development and validation of an advanced process for manufacturing composite fuselage frames, which will result in a significant reduction in overall production costs, component weight and manufacturing flow.
In order to understand the feasibility of the technology to match the application, LRI and RTM processes will be validated and cost assessed through the application of the building block approach, meaning starting from Level 1 coupons to advance then to Level 2 elements to finally validate at test Level 3 of subcomponents to pass at the end to the realization of two demonstrators.

Call for proposal

H2020-CS2-CFP02-2015-01
See other projects for this call

Coordinator

DESIGN MANUFACTORING SPA
Address
Via Dei Fiorentini 21
80133 Napoli
Italy
Activity type
Private for-profit entities (excluding Higher or Secondary Education Establishments)
EU contribution
€ 78 750

Participants (2)

FUNDACIO EURECAT
Spain
EU contribution
€ 206 875
Address
Avenida Universitat Autonoma 23
08290 Cerdanyola Del Valles (Barcelona)
Activity type
Research Organisations
LGAI TECHNOLOGICAL CENTER SA
Spain
EU contribution
€ 114 144,63
Address
Ronda De La Font Del Carme Sn Bellaterra Campus De La Universitat Autonoma De Barcelona
08193 Cerdanyola Del Valles Barcelona
Activity type
Private for-profit entities (excluding Higher or Secondary Education Establishments)