Skip to main content

Model Predictive Control and Innovative System Integration of GEOTABS;-) in Hybrid Low Grade Thermal Energy Systems - Hybrid MPC GEOTABS

Deliverables

Dissemination plan

Dissemination plan, interim reports in M03, M12, M24

Policy support report

Policy support report

List of 3 selected hybrid GEOTABS demonstration cases, and list of backup hybrid GEOTABS demon¬stration cases

List of 3 selected hybrid GEOTABS demonstration cases, and list of backup hybrid GEOTABS demon¬stration cases

Concept and impact validation for the demonstration buildings based on the real-life test bed

Concept and impact validation for the demonstration buildings based on the real-life test bed, including quantitative savings due to MPC in real-life demonstration buildings.

Concept and impact validation for the case-study buildings based on the virtual test bed

Report describing the quantitative savings realised by MPC (versus RBC), by control integrated design of GEOTABS buildings, by using a hybrid MPC GEOTABS (versus non-GEOTABS) system. In this report the evaluation based on the virtual test-bed (T4.3) is documented.

Consolidated list of the large stakeholder community

Consolidated list of the large stakeholder community

Initial Data Managament Plan

Initial Data Managament Plan

Overview of SEB members and SEB procedures

Overview of SEB members and SEB procedures

hybridGEOTABS sizing in feasibility studies and pre-design: tool and manual

Step by step hybrid MPC GEOTABS sizing guidebook and tool for feasibility studies and pre-design

Report/paper describing the mathematical formulation of different objective functions for Hybrid GEOTABS buildings MPC

Report/paper describing the mathematical formulation of different objective functions for Hybrid GEOTABS buildings MPC

Report describing the first validation building: all techno¬logies installed and ready for testing

Report describing the first validation building: all techno¬logies installed and ready for testing

Validation of thermal comfort, IEQ, productivity and health in hybridGEOTABS buildings

Validation of thermal comfort, IEQ, productivity and health in hybridGEOTABS buildings based on measurements, surveys etc. in the demonstration buildings.

Report describing the current and good practices for design and control of hybridGEOTABS buildings

Report describing the current and good practices for design and control of Hybrid GEOTABS buildings

Update on the development and production of promotional materials and submission of the materials produced

Update on the development and production of promotional materials and submission of the materials produced, interim reports on M09, M18, M36

Report describing the measurement protocol to be used in the demonstration cases

Report describing the measurement protocol to be used in the demonstration cases

Report describing the demo cases with newly implemented hybridGEOTABS design and/or control concepts

Report describing the demo cases with newly implemented MPC-: GT design and/or control concepts (3 demonstration cases for the control concept; design demonstrators)

project management strategy

Document describing the project management strategy

Communication plan

Communication plan, interim reports in M02, M12, M24

List of case studies and corresponding project sheets for calibration of emulator models

List of case studies and corresponding project sheets for calibration of emulator models

Report on the usability of TABS-panel s (radiant ceiling panels with PCM)

Report on the usability of TABS-panel s (radiant ceiling panels with PCM)

A specifications of a set of standardized modular hybrid GEOTABS component packages

A specifications of a set of standardized modular hybrid GEOTABS component packages

Quantified differences in optimal TABS, HP and GSHX sizing for MPC and RBC

Quantified differences in optimal TABS, HP and GSHX sizing for MPC and RBC

Report documenting the two baseline cases: non-GEOTABS and RBC GEOTABS

Report documenting the two baseline cases: non-GEOTABS and RBC GEOTABS

Environmental impact assessment of hybridGEOTABS buildings

Environmental impact assessment of hybridGEOTABS buildings

hybridGEOTABS manual

Hybrid MPC-GEOTABS manual

Updated Data Managament Plan

Updated Data Managament Plan

Industrialisation strategy

Industrialisation strategy: document describing the industrialisation requirements for prefabrication and pre-engineering of modules for MPC GEOTABS, and the approach for integrating MPC GEOTABS efficiently to the building process

Review of thermal comfort, IEQ, productivity and health in hybridGEOTABS buildings

Review of thermal comfort, IEQ, productivity and health in hybridGEOTABS buildings. This deliverable incorporates the literature review.

Overall cost/benefit analysis for hybridGEOTABS buildings

Overall cost/benefit analysis for hybridGEOTABS buildings

hybridGEOTABS system concept: document defining the system concept, individual modules and interfaces

hybridGEOTABS system concept: document defining the system concept, individual modules and interfaces

Report describing robust MPC formulation and its validation

Report describing robust MPC formulation and its validation

Component models added to the OpenIDEAS Library (software code)

Component models added to the OpenIDEAS Library (software code)

Report on the workshops (four)

Report on the workshops, interim reports in M12, M24, M36

Searching for OpenAIRE data...

Publications

A Methodology for Long-Term Model Predictive Control of Hybrid Geothermal Systems: The Shadow-Cost Formulation

Author(s): Iago Cupeiro Figueroa, Massimo Cimmino, Lieve Helsen
Published in: Energies, Issue 13/23, 2020, Page(s) 6203, ISSN 1996-1073
DOI: 10.3390/en13236203

All you need to know about model predictive control for buildings

Author(s): Ján Drgoňa, Javier Arroyo, Iago Cupeiro Figueroa, David Blum, Krzysztof Arendt, Donghun Kim, Enric Perarnau Ollé, Juraj Oravec, Michael Wetter, Draguna L. Vrabie, Lieve Helsen
Published in: Annual Reviews in Control, Issue 50, 2020, Page(s) 190-232, ISSN 1367-5788
DOI: 10.1016/j.arcontrol.2020.09.001

Fluid temperature predictions of geothermal borefields using load estimations via state observers

Author(s): Iago Cupeiro Figueroa, Massimo Cimmino, Ján Drgoňa, Lieve Helsen
Published in: Journal of Building Performance Simulation, Issue 14/1, 2021, Page(s) 1-19, ISSN 1940-1493
DOI: 10.1080/19401493.2020.1838612

Economic Optimal HVAC Design for Hybrid GEOTABS Buildings and CO2 Emissions Analysis

Author(s): Damien Picard, Lieve Helsen
Published in: Energies, Issue 11/2, 2018, Page(s) 314, ISSN 1996-1073
DOI: 10.3390/en11020314

Experimental Comparison of Radiant Ceiling Panels and Ceiling Panels Containing Phase Change material (PCM)

Author(s): Dragos-Ioan Bogatu, Eleftherios Bourdakis, Ongun Berk Kazanci, Bjarne W. Olesen
Published in: E3S Web of Conferences, Issue 111, 2019, Page(s) 01072, ISSN 2267-1242
DOI: 10.1051/e3sconf/201911101072

Interaction of GEOTABS and secondary heating and cooling systems in hybridGEOTABS buildings: towards a sizing methodology

Author(s): Mohsen Sharifi, Rana Mahmoud, Eline Himpe, Jelle Laverge
Published in: E3S Web of Conferences, Issue 111, 2019, Page(s) 01083, ISSN 2267-1242
DOI: 10.1051/e3sconf/201911101083

Energy and thermal comfort performance evaluation of PCM ceiling panels for cooling a renovated office room

Author(s): José Quesada Allerhand, Ongun Berk Kazanci, Bjarne W. Olesen
Published in: E3S Web of Conferences, Issue 111, 2019, Page(s) 03020, ISSN 2267-1242
DOI: 10.1051/e3sconf/201911103020

Estimation of load duration curves from general building data in the building stock using dynamic BES-models

Author(s): Rana M. Mahmoud, Mohsen Sharifi, Eline Himpe, Marc Delghust, Jelle Laverge
Published in: E3S Web of Conferences, Issue 111, 2019, Page(s) 01078, ISSN 2267-1242
DOI: 10.1051/e3sconf/201911101078

Investigation of the influence of operation conditions on the discharge of PCM ceiling panels.

Author(s): José Quesada Allerhand, Ongun Berk Kazanci, Bjarne W. Olesen
Published in: E3S Web of Conferences, Issue 111, 2019, Page(s) 03021, ISSN 2267-1242
DOI: 10.1051/e3sconf/201911103021

Development and validation of a full-time-scale semi-analytical model for the short- and long-term simulation of vertical geothermal bore fields

Author(s): Alex Laferrière, Massimo Cimmino, Damien Picard, Lieve Helsen
Published in: Geothermics, Issue 86, 2020, Page(s) 101788, ISSN 0375-6505
DOI: 10.1016/j.geothermics.2019.101788

Economic comparison of TABS, PCM ceiling panels and all-air systems for cooling offices

Author(s): Luca Bergia Boccardo, Ongun Berk Kazanci, Jose Quesada Allerhand, Bjarne W. Olesen
Published in: Energy and Buildings, Issue 205, 2019, Page(s) 109527, ISSN 0378-7788
DOI: 10.1016/j.enbuild.2019.109527

Short-term modeling of hybrid geothermal systems for Model Predictive Control

Author(s): Iago Cupeiro Figueroa, Damien Picard, Lieve Helsen
Published in: Energy and Buildings, Issue 215, 2020, Page(s) 109884, ISSN 0378-7788
DOI: 10.1016/j.enbuild.2020.109884

Model and Validation of a Multi-family Building ‘Haus M’ Using Modelica

Author(s): Josué Borrajo Bastero, Eline Himpe, Martin Ménard, Anne Caminade, Jelle Laverge
Published in: Proceedings of Building Simulation 2019: 16th Conference of IBPSA, 2020, Page(s) 4235-4242
DOI: 10.26868/25222708.2019.210763

A Modelling Approach to Reduce the Simulation Time of Building Stock Models

Author(s): Rana Mahmoud, Eline Himpe, Marc Delghust, Jelle Laverge
Published in: Proceedings of Building Simulation 2019: 16th Conference of IBPSA, 2020, Page(s) 1491-1497
DOI: 10.26868/25222708.2019.210860

State Observer for Optimal Control using White-box Building Models

Author(s): Iago Cupeiro Figueroa, Ján Drgoňa, Mohammad Abdollahpouri, Damien Picard, Lieve Helsen
Published in: International High Performance Buildings Conference proceedings, Issue July 2018, Paper 271, 2018

Towards real MPC implementation in an office building using TACO

Author(s): Filip Jorissen, Damien Picard, Iago Cupeiro Figueroa,Wim Boydens, Lieve Helsen
Published in: International High Performance Building Conference proceedings, Issue July 2018, Paper 276, 2018

Short- and long-term optimal control of hybrid GEOTABS Buildings

Author(s): Iago Cupeiro Figueroa
Published in: Issue March 2021, 2021

Key Modules and Optimization Approach for hybrid GEOTABS Buildings: Background and state-of-the-art

Author(s): Héctor Cano Esteban, Qian Wang, Jan Hoogmartens, Ongun Berk Kazanci
Published in: The REHVA European HVAC Journal, Issue Vol. 56, issue 1, February 2019, 2019, Page(s) 40-46, ISSN 1307-3729

hybridGEOTABS project - MPC for controlling the power of the ground by integration

Author(s): Filip Jorissen, Eline Himpe, Damien Picard, Tiziana Buso, Jelle Laverge, Wim Boydens, Lieve Helsen
Published in: The REHVA European HVAC Journal, Issue Vol. 55, Issue 3, June 2018, 2018, Page(s) 58-64, ISSN 1307-3729