Model Predictive Control and Innovative System Integration of GEOTABS;-) in Hybrid Low Grade Thermal Energy Systems - Hybrid MPC GEOTABS

Informacje na temat projektu

MPC-. GT

Identyfikator umowy o grant: 723649

DOI

10.3030/723649

Projekt został zamknięty

Data podpisania przez KE 22 Sierpnia 2016

Data rozpoczęcia 1 Września 2016

Data zakończenia 28 Lutego 2021

Finansowanie w ramach

• SOCIETAL CHALLENGES - Secure, clean and efficient energy

Koszt całkowity

€ 4 243 701,25

Wkład UE

€ 3 969 951,25

Koordynowany przez

UNIVERSITEIT GENT
Belgium

CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.

Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .

Rezultaty

Documents, reports (31)

Dissemination plan

Dissemination plan, interim reports in M03, M12, M24

Policy support report
List of 3 selected hybrid GEOTABS demonstration cases, and list of backup hybrid GEOTABS demon¬stration cases
Concept and impact validation for the demonstration buildings based on the real-life test bed

Concept and impact validation for the demonstration buildings based on the real-life test bed, including quantitative savings due to MPC in real-life demonstration buildings.

Concept and impact validation for the case-study buildings based on the virtual test bed

Report describing the quantitative savings realised by MPC (versus RBC), by control integrated design of GEOTABS buildings, by using a hybrid MPC GEOTABS (versus non-GEOTABS) system. In this report the evaluation based on the virtual test-bed (T4.3) is documented.

Consolidated list of the large stakeholder community
Initial Data Managament Plan
Overview of SEB members and SEB procedures
hybridGEOTABS sizing in feasibility studies and pre-design: tool and manual

Step by step hybrid MPC GEOTABS sizing guidebook and tool for feasibility studies and pre-design

Report/paper describing the mathematical formulation of different objective functions for Hybrid GEOTABS buildings MPC
Report describing the first validation building: all techno¬logies installed and ready for testing

Report describing the first validation building: all techno¬logies installed and ready for testing

Validation of thermal comfort, IEQ, productivity and health in hybridGEOTABS buildings

Validation of thermal comfort, IEQ, productivity and health in hybridGEOTABS buildings based on measurements, surveys etc. in the demonstration buildings.

Report describing the current and good practices for design and control of hybridGEOTABS buildings

Report describing the current and good practices for design and control of Hybrid GEOTABS buildings

Update on the development and production of promotional materials and submission of the materials produced

Update on the development and production of promotional materials and submission of the materials produced, interim reports on M09, M18, M36

Report describing the measurement protocol to be used in the demonstration cases
Report describing the demo cases with newly implemented hybridGEOTABS design and/or control concepts

Report describing the demo cases with newly implemented MPC-: GT design and/or control concepts (3 demonstration cases for the control concept; design demonstrators)

project management strategy

Document describing the project management strategy

Communication plan

Communication plan, interim reports in M02, M12, M24

List of case studies and corresponding project sheets for calibration of emulator models
Report on the usability of TABS-panel s (radiant ceiling panels with PCM)
A specifications of a set of standardized modular hybrid GEOTABS component packages
Quantified differences in optimal TABS, HP and GSHX sizing for MPC and RBC
Report documenting the two baseline cases: non-GEOTABS and RBC GEOTABS
Environmental impact assessment of hybridGEOTABS buildings
hybridGEOTABS manual

Hybrid MPC-GEOTABS manual

Updated Data Managament Plan
Industrialisation strategy

Industrialisation strategy: document describing the industrialisation requirements for prefabrication and pre-engineering of modules for MPC GEOTABS, and the approach for integrating MPC GEOTABS efficiently to the building process

Review of thermal comfort, IEQ, productivity and health in hybridGEOTABS buildings

Review of thermal comfort, IEQ, productivity and health in hybridGEOTABS buildings. This deliverable incorporates the literature review.

Overall cost/benefit analysis for hybridGEOTABS buildings
hybridGEOTABS system concept: document defining the system concept, individual modules and interfaces
Report describing robust MPC formulation and its validation

Other (1)

Component models added to the OpenIDEAS Library (software code)

Demonstrators, pilots, prototypes (1)

MPC implementation for hybridGEOTABS buildings

MPC implementation for Hybrid GEOTABS buildings

Websites, patent fillings, videos etc. (1)

Report on the workshops (four)

Report on the workshops, interim reports in M12, M24, M36

Publikacje

Peer reviewed articles (13)

A Methodology for Long-Term Model Predictive Control of Hybrid Geothermal Systems: The Shadow-Cost Formulation

Autorzy: Iago Cupeiro Figueroa, Massimo Cimmino, Lieve Helsen
Opublikowane w: Energies, Numer 13/23, 2020, Strona(/y) 6203, ISSN 1996-1073
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en13236203

All you need to know about model predictive control for buildings

Autorzy: Ján Drgoňa, Javier Arroyo, Iago Cupeiro Figueroa, David Blum, Krzysztof Arendt, Donghun Kim, Enric Perarnau Ollé, Juraj Oravec, Michael Wetter, Draguna L. Vrabie, Lieve Helsen
Opublikowane w: Annual Reviews in Control, Numer 50, 2020, Strona(/y) 190-232, ISSN 1367-5788
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.arcontrol.2020.09.001

Fluid temperature predictions of geothermal borefields using load estimations via state observers

Autorzy: Iago Cupeiro Figueroa, Massimo Cimmino, Ján Drgoňa, Lieve Helsen
Opublikowane w: Journal of Building Performance Simulation, Numer 14/1, 2021, Strona(/y) 1-19, ISSN 1940-1493
Wydawca: Taylor & Francis
DOI: 10.1080/19401493.2020.1838612

Economic Optimal HVAC Design for Hybrid GEOTABS Buildings and CO2 Emissions Analysis

Autorzy: Damien Picard, Lieve Helsen
Opublikowane w: Energies, Numer 11/2, 2018, Strona(/y) 314, ISSN 1996-1073
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en11020314

Experimental Comparison of Radiant Ceiling Panels and Ceiling Panels Containing Phase Change material (PCM)

Autorzy: Dragos-Ioan Bogatu, Eleftherios Bourdakis, Ongun Berk Kazanci, Bjarne W. Olesen
Opublikowane w: E3S Web of Conferences, Numer 111, 2019, Strona(/y) 01072, ISSN 2267-1242
Wydawca: EDF Sciences
DOI: 10.1051/e3sconf/201911101072

Interaction of GEOTABS and secondary heating and cooling systems in hybridGEOTABS buildings: towards a sizing methodology

Autorzy: Mohsen Sharifi, Rana Mahmoud, Eline Himpe, Jelle Laverge
Opublikowane w: E3S Web of Conferences, Numer 111, 2019, Strona(/y) 01083, ISSN 2267-1242
Wydawca: EDP Sciences
DOI: 10.1051/e3sconf/201911101083

Energy and thermal comfort performance evaluation of PCM ceiling panels for cooling a renovated office room

Autorzy: José Quesada Allerhand, Ongun Berk Kazanci, Bjarne W. Olesen
Opublikowane w: E3S Web of Conferences, Numer 111, 2019, Strona(/y) 03020, ISSN 2267-1242
Wydawca: EDF Sciences
DOI: 10.1051/e3sconf/201911103020

Estimation of load duration curves from general building data in the building stock using dynamic BES-models

Autorzy: Rana M. Mahmoud, Mohsen Sharifi, Eline Himpe, Marc Delghust, Jelle Laverge
Opublikowane w: E3S Web of Conferences, Numer 111, 2019, Strona(/y) 01078, ISSN 2267-1242
Wydawca: EDP Sciences
DOI: 10.1051/e3sconf/201911101078

Investigation of the influence of operation conditions on the discharge of PCM ceiling panels.

Autorzy: José Quesada Allerhand, Ongun Berk Kazanci, Bjarne W. Olesen
Opublikowane w: E3S Web of Conferences, Numer 111, 2019, Strona(/y) 03021, ISSN 2267-1242
Wydawca: EDF Sciences
DOI: 10.1051/e3sconf/201911103021

Development and validation of a full-time-scale semi-analytical model for the short- and long-term simulation of vertical geothermal bore fields

Autorzy: Alex Laferrière, Massimo Cimmino, Damien Picard, Lieve Helsen
Opublikowane w: Geothermics, Numer 86, 2020, Strona(/y) 101788, ISSN 0375-6505
Wydawca: Pergamon Press
DOI: 10.1016/j.geothermics.2019.101788

Potential of the MPC hybridGEOTABS concept for buildings: Libeznice school

Autorzy: Yauheni Kachalouski, Jiri Cigler, Lukas Ferkl
Opublikowane w: The REHVA European HVAC Journal, Numer Vol. 56, issue 5, October 2019, 2019, Strona(/y) 64-66, ISSN 1307-3729
Wydawca: TEKNİK SEKTÖR YAYINCILIĞI A.Ş.

Economic comparison of TABS, PCM ceiling panels and all-air systems for cooling offices

Autorzy: Luca Bergia Boccardo, Ongun Berk Kazanci, Jose Quesada Allerhand, Bjarne W. Olesen
Opublikowane w: Energy and Buildings, Numer 205, 2019, Strona(/y) 109527, ISSN 0378-7788
Wydawca: Elsevier BV
DOI: 10.1016/j.enbuild.2019.109527

Short-term modeling of hybrid geothermal systems for Model Predictive Control

Autorzy: Iago Cupeiro Figueroa, Damien Picard, Lieve Helsen
Opublikowane w: Energy and Buildings, Numer 215, 2020, Strona(/y) 109884, ISSN 0378-7788
Wydawca: Elsevier BV
DOI: 10.1016/j.enbuild.2020.109884

Conference proceedings (4)

Model and Validation of a Multi-family Building ‘Haus M’ Using Modelica

Autorzy: Josué Borrajo Bastero, Eline Himpe, Martin Ménard, Anne Caminade, Jelle Laverge
Opublikowane w: Proceedings of Building Simulation 2019: 16th Conference of IBPSA, 2020, Strona(/y) 4235-4242, ISBN 9781775052012
Wydawca: IBPSA
DOI: 10.26868/25222708.2019.210763

A Modelling Approach to Reduce the Simulation Time of Building Stock Models

Autorzy: Rana Mahmoud, Eline Himpe, Marc Delghust, Jelle Laverge
Opublikowane w: Proceedings of Building Simulation 2019: 16th Conference of IBPSA, 2020, Strona(/y) 1491-1497, ISBN 9781775052012
Wydawca: IBPSA
DOI: 10.26868/25222708.2019.210860

State Observer for Optimal Control using White-box Building Models

Autorzy: Iago Cupeiro Figueroa, Ján Drgoňa, Mohammad Abdollahpouri, Damien Picard, Lieve Helsen
Opublikowane w: International High Performance Buildings Conference proceedings, Numer July 2018, Paper 271, 2018
Wydawca: Purdue University

Towards real MPC implementation in an office building using TACO

Autorzy: Filip Jorissen, Damien Picard, Iago Cupeiro Figueroa,Wim Boydens, Lieve Helsen
Opublikowane w: International High Performance Building Conference proceedings, Numer July 2018, Paper 276, 2018
Wydawca: Purdue University

Thesis and dissertations (1)

Short- and long-term optimal control of hybrid GEOTABS Buildings

Autorzy: Iago Cupeiro Figueroa
Opublikowane w: Numer March 2021, 2021
Wydawca: KU Leuven

Non-peer reviewed articles (2)

Key Modules and Optimization Approach for hybrid GEOTABS Buildings: Background and state-of-the-art

Autorzy: Héctor Cano Esteban, Qian Wang, Jan Hoogmartens, Ongun Berk Kazanci
Opublikowane w: The REHVA European HVAC Journal, Numer Vol. 56, issue 1, February 2019, 2019, Strona(/y) 40-46, ISSN 1307-3729
Wydawca: TEKNİK SEKTÖR YAYINCILIĞI A.Ş.

hybridGEOTABS project - MPC for controlling the power of the ground by integration

Autorzy: Filip Jorissen, Eline Himpe, Damien Picard, Tiziana Buso, Jelle Laverge, Wim Boydens, Lieve Helsen
Opublikowane w: The REHVA European HVAC Journal, Numer Vol. 55, Numer 3, June 2018, 2018, Strona(/y) 58-64, ISSN 1307-3729
Wydawca: TEKNİK SEKTÖR YAYINCILIĞI A.Ş

Monographic books (1)

Renewable and Storage-Integrated Systems to Supply Comfort in Buildings: Pre-design and Control for hybridGEOTABS Projects

Autorzy: Wim Boydens, Lieve Helsen, Bjarne W. Olesen, Lukas Ferkl, Jelle Laverge, Eline Himpe (ed)
Opublikowane w: 2021, ISBN 9789076714592
Wydawca: A&S/books