Skip to main content
Go to the home page of the European Commission (opens in new window)
English en
CORDIS - EU research results
CORDIS
Content archived on 2024-04-30

Topography and anchoring

Objective



Coated surfaces show specific properties for liquid crystals anchoring. Glass surfaces coated with SiO by evaporation have already been studied and phase diagram of '5CB' tilt angle already been established. However, microscopic mechanisms responsible for this anchoring are still unknown but they are expected to be linked to the nature of the substrate (glass, silicon...). We have already per- formed some preliminary ellipsometric measurements (Collhge de France) on '5CB' spreading on silicon wafers : in contact with the surface, molecules seem to be ver- tical (o = O rad) while macroscopically, we measure a tilt angle close to o = r/2 !
The aim of the project is to get more information about this phenomenon by varying the relevant parameters of the surface : evaporation angle of incidence, SiO thickness deposited (i.e. roughness, surface
polarisability...).
We intent to characterize the Si/SiO rough surfaces by AFM using fractal programmes being developed at the University of Calabria. In parallel, anchoring will be measured by way of reflective microscopy in order to obtain the phase dia- gram of tilt angle on silicon wafers. This work will be connected with ellipsometric measurements.

Fields of science (EuroSciVoc)

Programme(s)

Topic(s)

Call for proposal

Data not available

Funding Scheme

RGI - Research grants (individual fellowships)

Coordinator

UNIVERSITA DEGLI STUDI DELLA CALABRIA
EU contribution
No data
Address
Via Pietro Bucci
87036 RENDE
Italy
Total cost
No data

Participants (1)