Skip to main content
European Commission logo print header

Grip force mapping for characterisation of hand-held vibrating tools (VIB-TOOL)

Objective

The goal is to improve repeatability and reproducibility of vibration tests carried out on hand-held power tools by means of arrays of polymeric capacitive pressure sensors used to map contact force and pressure.
Scientific and technological objectives are:
a) to develop sensors to measure grip and push force and contact pressure distribution for hand-held tools in the form of- matrices to be wrapped on the handle, - instrumented gloves;
b) to perform a thorough metrologic analysis of their performance static and dynamic characteristics;
c) to perform tests on different types of hand-held tools according to existing norms and with the monitoring of grip force, correlation analysis aimed to verify if dispersion of results can be reduced by monitoring and controlling grip force during tests;
d) to evaluate results for standardization purposes;
e) to explore possible application of these sensors for ergonomic and medical studies.

Call for proposal

Data not available

Coordinator

UNIVERSITA POLITECNICA DELLE MARCHE
EU contribution
No data
Address
Via Delle Brecce Bianche
60131 ANCONA
Italy

See on map

Total cost
No data

Participants (6)