Objetivo The metrology control plays an important role within the manufacturing industry in terms of size and dimension inspection. In the aeronautics sector, the metrology reaches its high criticise level, due to the high measurement precision required on large parts. The metrology operation is required not only during the final inspection, but also above all in the scope of the assembly process. Faced with this criticise and in order to take into account the size of the aircraft parts, from the early days of aircrafts manufacturing, the industrial actors uses complex frames which support both the parts to be controlled the manual instrument of measure. This solution is both time and cost consuming due to the characteristics of the frame, which guarantees the accuracy of the measure. This project aims at developing relevant photogrammetry and image processing techniques to perform the "in-process" positioning (during the assembly phase) and "afterwards", to complete the final measurement control in the aeronautics sector. IPROMES addresses the FP6 aeronautics area "Strengthening and competitiveness" and particularly the research topics 1.3.1.1 b) manufacturing: flexible tooling, automated process and assembly, advanced manufacturing methods to reduce recurring and non-recurring cost while supporting volume flexibility in processing section and test techniques. IPROMES leads to a reduction of metrology cost by 3 and of measurement operation time by 2 in comparison with the laser radar solution. Compared to traditional frames with gauge solutions the time reduction can reach factor of 10 on control time. Ámbito científico engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensorsoptical sensorsengineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraftengineering and technologymechanical engineeringvehicle engineeringautomotive engineeringengineering and technologyelectrical engineering, electronic engineering, information engineeringinformation engineeringtelecommunicationsradio technologyradarengineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaeronautical engineering Programa(s) FP6-AEROSPACE - Aeronautics and Space: thematic priority 4 under the Focusing and Integrating Community Research programme 2002-2006. Tema(s) AERO-2002-1.3.1.1c - Maintenance Convocatoria de propuestas FP6-2002-AERO-1 Consulte otros proyectos de esta convocatoria Régimen de financiación STREP - Specific Targeted Research Project Coordinador ALMA CONSULTING GROUP SAS Aportación de la UE Sin datos Dirección Domaine des Bois d'Houlbec 27120 HOULBEC-COCHEREL Francia Ver en el mapa Enlaces Sitio web Opens in new window Coste total Sin datos Participantes (1) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo METROSTAFF SRL Italia Aportación de la UE Sin datos Dirección Corso Susa 242 RIVOLI (TORINO) Ver en el mapa Coste total Sin datos
