Objectif The aim of this project is to design, build and test novel cooling equipment based on recent research work, to be installed immediately behind the last stand of a hot strip mill to provide very fast and controllable cooling of the exiting strip. Optimized cooling patterns will be defined for the differing steel grades and products rolled in a modern hot strip mill. The unit will be designed so that 1.5 to 15 mm strip can be handled without any loss of speed or material, and with all the strip achieving the required mechanical properties. Programme(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Thème(s) T3 - Rolling and product treatment Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur CENTRE DE RECHERCHES METALLURGIQUES Contribution de l’UE Aucune donnée Adresse Rue Ernest Solvay, 11 4000 LIEGE Belgique Voir sur la carte Coût total Aucune donnée Participants (2) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire COCKERILL SAMBRE Belgique Contribution de l’UE Aucune donnée Adresse Quai d'Ougnée, 14 4102 OUGRÉE Voir sur la carte Coût total Aucune donnée USINES GUSTAVE BOEL Belgique Contribution de l’UE Aucune donnée Adresse Rue des Rivaux 2 7100 LA LOUVIERE Voir sur la carte Coût total Aucune donnée