Objetivo The aim of this project is to design, build and test novel cooling equipment based on recent research work, to be installed immediately behind the last stand of a hot strip mill to provide very fast and controllable cooling of the exiting strip. Optimized cooling patterns will be defined for the differing steel grades and products rolled in a modern hot strip mill. The unit will be designed so that 1.5 to 15 mm strip can be handled without any loss of speed or material, and with all the strip achieving the required mechanical properties. Programa(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Tema(s) T3 - Rolling and product treatment Convocatoria de propuestas Data not available Régimen de financiación CSC - Cost-sharing contracts Coordinador CENTRE DE RECHERCHES METALLURGIQUES Aportación de la UE Sin datos Dirección Rue Ernest Solvay, 11 4000 LIEGE Bélgica Ver en el mapa Coste total Sin datos Participantes (2) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo COCKERILL SAMBRE Bélgica Aportación de la UE Sin datos Dirección Quai d'Ougnée, 14 4102 OUGRÉE Ver en el mapa Coste total Sin datos USINES GUSTAVE BOEL Bélgica Aportación de la UE Sin datos Dirección Rue des Rivaux 2 7100 LA LOUVIERE Ver en el mapa Coste total Sin datos