Ultra fast cooling in the hot strip mill (stage 1)

Informazioni relative al progetto

ID dell’accordo di sovvenzione: 7215-CA-204

Progetto chiuso

Data di avvio 1 Luglio 1996

Data di completamento 30 Giugno 1998

Finanziato da

• Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002

Costo totale € 3 188 500,00

Contributo UE € 1 275 400,00

Coordinato da

CENTRE DE RECHERCHES METALLURGIQUES
Belgium

Obiettivo

The aim of this project is to design, build and test novel cooling equipment based on recent research work, to be installed immediately behind the last stand of a hot strip mill to provide very fast and controllable cooling of the exiting strip. Optimized cooling patterns will be defined for the differing steel grades and products rolled in a modern hot strip mill. The unit will be designed so that 1.5 to 15 mm strip can be handled without any loss of speed or material, and with all the strip achieving the required mechanical properties.

Programma(i)

• ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002

Argomento(i)

• T3 - Rolling and product treatment

Invito a presentare proposte

Data not available

Meccanismo di finanziamento

CSC - Cost-sharing contracts

Coordinatore

CENTRE DE RECHERCHES METALLURGIQUES

• Contributo UE: Nessun dato
• Indirizzo: Rue Ernest Solvay, 11 ; 4000 LIEGE ; Belgio
• Costo totale: Nessun dato

Partecipanti (2)

COCKERILL SAMBRE

Belgio

• Contributo UE: Nessun dato
• Indirizzo: Quai d'Ougnée, 14 ; 4102 OUGRÉE
• Costo totale: Nessun dato

USINES GUSTAVE BOEL

Belgio

• Contributo UE: Nessun dato
• Indirizzo: Rue des Rivaux 2 ; 7100 LA LOUVIERE
• Costo totale: Nessun dato