Skip to main content
European Commission logo print header

European Railway Electromagnetic Compatibility

Article Category

Article available in the following languages:

A step forward for reconciling trains and tracks in Europe

Electromagnetic interference poses a major barrier to achieving rail interoperability across Europe. Harmonising rules and accelerating the certification process should help overcome this barrier.

Industrial Technologies icon Industrial Technologies

Lengthy and costly is the only way to describe the current authorisation process for bringing rail vehicles into service according to technical specifications for interoperability (TSI) and national safety rules. Electromagnetic compatibility (EMC) between rail vehicles and installed track circuits represents one of the major cost drivers in this process for putting new rolling stock on the tracks. Each country has its own rules and assessment procedures, which hinders true interoperability. The EUREMCO (European railway electromagnetic compatibility) project addressed the core issue of EMC. Closing some 'open points' in TSI related to EMC should lead to a time and cost reduction of rail vehicle certification processes. Currently, there are no standards or procedures addressing the transient effects on track circuits. Sharing of operator and manufacturers' data on transients with the European community of experts formed a key part of project activities. This knowledge should help address how to handle those transients that affect data acquisition during certification tests. Work was carried out on the characteristics of transients that cause interference. Another activity was a modelling exercise that gives the transfer function from the train to the track circuit receiver and the effects of transients. To validate the current TSI version for the 15 kV AC power supply system, three project partners (rail operators) carried out measurement campaigns in Austria, Germany and Switzerland. The measurements were taken using a locomotive with different capacitive input impedances for simulating roof cables with different lengths. Project partners achieved significant progress in defining and proposing European-wide cross-accepted test tracks for the 25 kV AC and DC power supply systems. Results should help facilitate certification in all countries using such electrification systems. EUREMCO partners also provided a recommendation to help prevent rolling stock from interfering with track circuits on non-electrified lines. EMC measurements successfully proved the consistency of this recommendation. Once Europe reaches common understanding on transients and sets interference emission limits, it should be possible to use the results obtained in one country to authorise the operation of a vehicle in another.

Keywords

Trains, rail interoperability, certification, electromagnetic compatibility, track circuits, transients

Discover other articles in the same domain of application