Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS

Innovative digital watermarks and green solvents for the recovery and recycling of multi-layer materials

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Analysis on multilayer packaging (se abrirá en una nueva ventana)

Following the collection of multiple samples of laminate pouches and pharma blister packs (PLA Lead), AIM will lead the full analysis of the samples, including type of adhesive and Aluminium and the analysis of laminate packaging - type of polymer films used, number and thickness of layers; and the analysis of pharma blister packaging - type of plastic, grade and quantity of aluminium used

Social impacts analysis (se abrirá en una nueva ventana)

IPM2 to lead. A social impacts analysis of the materials, products and technologies will be conducted using social life cycle assessment (S-LCA), which will be performed in parallel to LCA-LCC (task 7.3).

Report on mechanical recycling and sorting methods (SOTA) (se abrirá en una nueva ventana)

Packing waste will undergo varying degrees of shredding and grinding. AIM will take the lead to work out the best technique to ensure efficient delamination and selective polymer dissolution. MIK will take the lead to develop NIR technology for sorting of the multilayer packaging containing aluminium.

Report on preliminary market analysis, dissemination plans and KPI results. (se abrirá en una nueva ventana)

Following the completion of WP 1 and the submission of D1.1 – 1.3, TWI will issue a report on the results obtained from the market analysis, feedback from industry and the targeted markets. A preliminary strategy on how our technology will be marketed will be provided including communication strategy on targeted end users. The report will also list all dissemination activities and KPI results

Safety and health risk management procedures (se abrirá en una nueva ventana)

IPM2 to take the lead on safety and health risk management procedures

Report on the solvent recycling protocols (se abrirá en una nueva ventana)

TWI will take the dissolved polymer blend produced by following the procedure in Task 4.4 and use aqueous two- phase extraction for the recovery of hydrophilic ILs after filtration of the precipitated polymer. If hydrophobic ILs are selected in WP4, then extraction with organic solvent will be carried out.

Report on the analysis of isolated polymers (se abrirá en una nueva ventana)

SOL will lead the development of the analysis method to ensure high purity and usable physical form of the recovered polymers.

Summarised results of process validation trials (se abrirá en una nueva ventana)

(AIM to lead) After full installation of the pilot reactor system, Sol-Rec2 processes for polymer dissolution and recovery will be trialled and validated using the different types of multi-layer packaging waste sorted and characterised in WP2 and WP3.

Bench marking LCA (se abrirá en una nueva ventana)

IPM2 to take the lead on production of a bench marking LCA. Study based on the current state of the art industrial scale technologies

Industry requirements for sustainable multi-layer packaging (se abrirá en una nueva ventana)

TWI will take the lead to engage with key manufacturers of multilayer packaging and seek to establish a sound understanding of their individual requirements for multi-layer packaging and the key barriers currently restricting recycling.

Report on KPIs (se abrirá en una nueva ventana)

An initial report on the established indicators and results up to month 3 will be submitted

Quality of recovered polymers (se abrirá en una nueva ventana)

(MIK to lead) An extensive programme of analysis will be carried out on all the isolated polymers to confirm the quality of the recovered materials and assess performance in comparison to virgin polymer.

Methodology for decontamination (se abrirá en una nueva ventana)

MIK will take the lead to test various decontamination strategies. The decontamination efficiency of each approach will thus be evaluated.

Participation to the creation of a Cluster of plastic circularity oriented projects (se abrirá en una nueva ventana)

IPM² will contact similar projects within the same calls on Plastic recycling issues and circularity, create a Cluster, use the tools offered by EC to prepare common logos, branding, documentation, visuals, participate to events in common stands, sharing experience and exchanges on similar tasks, make presentations of both project whereabouts and Cluster content.

Consumer survey questionnaire (se abrirá en una nueva ventana)

IPM2 will take the lead to complete consumer surveys to provide a detailed assessment of public attitudes towards multi-layer packaging and recycling.

Workshops on multi-layer packaging waste (se abrirá en una nueva ventana)

IPM2 will take the lead to organize workshops aimed at improving consumer attitudes and behaviours towards multi- layer packaging waste and recycling

Publicaciones

Sol-rec 2 : Report on mechanical recycling and sorting methods (SOTA) (se abrirá en una nueva ventana)

Autores: Asociacion de Investigacion de Materiales Plasticos y Conexas
Publicado en: 2022
Editor: Solrec 2
DOI: 10.5281/zenodo.15809374

Bench marking LCA (se abrirá en una nueva ventana)

Autores: iPM²
Publicado en: 2022
Editor: Solrec2
DOI: 10.5281/zenodo.15813796

Report on KPIs (se abrirá en una nueva ventana)

Autores: TWI
Publicado en: 2021
Editor: Solrec 2
DOI: 10.5281/zenodo.15813730

Consumer survey questionnaire (se abrirá en una nueva ventana)

Autores: Pascal Négré; Martin Goosey, Rod Kellner
Publicado en: 2021
Editor: Solrec 2
DOI: 10.5281/zenodo.15807550

Ponencia Resultados SOL-REC2 (se abrirá en una nueva ventana)

Autores: Asociacion de Investigacion de Materiales Plasticos y Conexas
Publicado en: Edición 2, 2022
Editor: AIM
DOI: 10.5281/zenodo.15462860

Workshops on multi-layer packaging waste (se abrirá en una nueva ventana)

Autores: iPM²
Publicado en: 2022
Editor: Solrec 2
DOI: 10.5281/zenodo.15813920

Sol-Rec 2 Video Clip presentation (se abrirá en una nueva ventana)

Autores: Solrec 2 team
Publicado en: 2023
Editor: Solrec 2
DOI: 10.5281/zenodo.7802147

Industry requirements for sustainable multi-layer packaging (se abrirá en una nueva ventana)

Autores: TWI
Publicado en: 2022
Editor: Solrec2
DOI: 10.5281/zenodo.15813655

SOL-REC2 presentation (se abrirá en una nueva ventana)

Autores: PASCAL NEGRE, GEORGE THEODOSOPOULOS
Publicado en: 2022
Editor: Solrec 2
DOI: 10.5281/zenodo.7801743

SOL-REC 2 Survey results (se abrirá en una nueva ventana)

Autores: Négré, Pascal
Publicado en: Edición 1, 2021
Editor: Solrec 2 project
DOI: 10.5281/zenodo.7886685

Analysis on multilayer packaging (se abrirá en una nueva ventana)

Autores: AIMPLAS
Publicado en: 2022
Editor: Solrec2
DOI: 10.5281/zenodo.15813685

Methodology for decontamination (se abrirá en una nueva ventana)

Autores: MIK
Publicado en: 2022
Editor: Solrec 2
DOI: 10.5281/zenodo.15813872

Report on preliminary market analysis, dissemination plans and KPI results (se abrirá en una nueva ventana)

Autores: TWI
Publicado en: 2022
Editor: Solrec 2
DOI: 10.5281/zenodo.15813952

Safety and health risk management procedures (se abrirá en una nueva ventana)

Autores: iPM²
Publicado en: 2022
Editor: Solrec 2
DOI: 10.5281/zenodo.15813708

Introduction to ionic liquids (Ils) and Deep Eutectic Solvents (DESs) for Recycling

Autores: Pr Andrew P. Abbott
Publicado en: 2022
Editor: N/A

Delamination and Evaluation of Multilayer PE/Al/PET Packaging Waste Separated Using a Hydrophobic Deep Eutectic Solvent (se abrirá en una nueva ventana)

Autores: Adamantini Loukodimou, Christopher Lovell, George Theodosopoulos, Kranthi Kumar Maniam, Shiladitya Paul
Publicado en: Polymers, Edición 16, 2024, Página(s) 2718, ISSN 2073-4360
Editor: MDPI AG
DOI: 10.3390/polym16192718

Formulation and Characterization of Deep Eutectic Solvents and Potential Application in Recycling Packaging Laminates (se abrirá en una nueva ventana)

Autores: Adamantini Loukodimou, Christopher Lovell, Tianmiao Li, George Theodosopoulos, Kranthi Kumar Maniam, Shiladitya Paul
Publicado en: Polymers, Edición 16, 2024, Página(s) 2781, ISSN 2073-4360
Editor: MDPI AG
DOI: 10.3390/polym16192781

Progress in Solvent-Based Recycling of Polymers from Multilayer Packaging (se abrirá en una nueva ventana)

Autores: Tianmiao Li, George Theodosopoulos, Chris Lovell, Adamantini Loukodimou, Kranthi Kumar Maniam, Shiladitya Paul
Publicado en: Polymers, Edición 16, 2024, Página(s) 1670, ISSN 2073-4360
Editor: MDPI AG
DOI: 10.3390/polym16121670

Sol-Rec 2 Presentation at Polymers 2022 (se abrirá en una nueva ventana)

Autores: Dr Berenika Syrek-Gerstenkorn, Prof Andy Abbott, & Dr Shiladitya Paul.
Publicado en: 2022
Editor: N/A
DOI: 10.5281/zenodo.7875017

Sol Rec2 Case Study: Assessment of Corrosion Behaviour of Aluminium and Degradation of Polymers During Delamination of Multi Material Packaging Systems (se abrirá en una nueva ventana)

Autores: Berenika Syrek-Gerstenkorn, Shiladitya Paul, Andrew P Abbott
Publicado en: 2022
Editor: N/A
DOI: 10.5281/zenodo.7804891

Sol-Rec2 : Novel Methods for Delamination of Pharma Blister Packs and other Multi-Layer Materials for Recycling Purposes (se abrirá en una nueva ventana)

Autores: Berenika Syrek-Gerstenkorn, Andrew P Abbott, Shiladitya Paul
Publicado en: Abstract: BOOK International Conference on Polymer Science and Engineering, 2022, Página(s) page 41 - 42
Editor: "USG-United Scientific Group # 8105, Rasor Blvd - Suite #112, PLANO, TX 75024 Tel: +1-469-854-2280/81; Fax: +1-469-854-2278; Email: secretary@polymersmeeting.com ; Web: https://polymers.unitedscientificgroup.org/"
DOI: 10.5281/zenodo.7875336

sol-rec2 abstract (se abrirá en una nueva ventana)

Autores: Pascal Négré
Publicado en: Edición 5, 2023
Editor: N/A
DOI: 10.5281/zenodo.7801648

Derechos de propiedad intelectual

WATERMARK DETECTION METHOD AND SYSTEM

Número de solicitud/publicación: P 35603
Fecha: 2022-06-16
Solicitante(s): FILIGRADE SUSTAINABLE WATERMARKS BV

Buscando datos de OpenAIRE...

Se ha producido un error en la búsqueda de datos de OpenAIRE

No hay resultados disponibles

Mi folleto 0 0