Supporting the Electric Vehicle REVOLUTION through maximising EV Range and End-of-Life Vehicle Recovery through optimisation of recycled plastics and advanced light materials

Información del proyecto

REVOLUTION

Identificador del acuerdo de subvención: 101006631

DOI

10.3030/101006631

Proyecto cerrado

Fecha de la firma de la CE 18 Noviembre 2020

Fecha de inicio 1 Enero 2021

Fecha de finalización 30 Junio 2024

Financiado con arreglo a

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Coste total

€ 5 895 200,32

Aportación de la UE

€ 4 997 912,63

Coordinado por

FARPLAS OTOMOTIV ANONIM SIRKETI
Türkiye

Periodic Reporting for period 2 - REVOLUTION (Supporting the Electric Vehicle REVOLUTION through maximising EV Range and End-of-Life Vehicle Recovery through optimisation of recycled plastics and advanced light materials)

Período documentado: 2022-07-01 hasta 2024-06-30

Resumen del contexto y de los objetivos generales del proyecto

REVOLUTION project aims to overcome the challenges hindering the use of recycled materials, but more broadly, restricting the widespread adoption of circular economy principles in the automotive industry with its cradle-to-cradle design approach.

The Project specifically targets the development of light materials and smart production processes for automotive applications. These will help automotive OEMs to meet the key challenges of End-of-Life Vehicle (ELV) directives and improve electric vehicles' efficiency and range by:
- identifying cost effective ways to implement mass reduction;
- introducing post-consumer recycled plastics (PCR);
- addressing the complicated end-of-life phase and recycling paths.

The Project has developed innovative technologies in automotive injection moulding processes through the use of an AI-based control system to optimize usage of recycled materials and deliver high-quality lighweighted parts. Eco-design approaches have been used to anticipate and minimize environmental impact particularly in relation to materials separation, recycling, recovery and End-of-Life. Specific PCR containing formulations have been developed for a range of thermoplastic types then demonstrated and validated in four automotive components.

REVOLUTION is now even more important following the introduction of the European Commission's End-of-Life Vehicle (ELV) Directive in 2023 with more focus on eco-design and more ambitious targets for reuse and recycling, and use of recycled content materials in manufacturing of vehicles.

Trabajo realizado desde el comienzo del proyecto hasta el final del período abarcado por el informe y los principales resultados hasta la fecha

The work performed in the REVOLUTION project covers the following:
- Development and optimisation of light plastic materials with >50% recycled content suitable for production of automotive components by industrial melt processing processes (injection, moulding, extrusion, thermoforming)
- Modelling and design of lightweight components
- Development of advanced process control system
- Integration and training of AI/ML control system and production of demonstrator components
- Completion of environmental and societal assessments
- Dissemination & Exploitation of project results

In general, despite some aspects proving more challenging than others, the project progressed well and achieving good results. The main result include:
- design, material formulation and manufacturing process for four ELV components – rear back seat panel, lower rear bumper, B-pillar cover, crash box
- Validation of these components against Stellantis protocols and test methods
- An injection moulding AI control system implemented on the factory floor

For more specific details of the project result please refer to the project website (www.revolution-project.eu) and LinkedIn channel (linkedin.com/in/revolution-project-296435204).

Avances que van más allá del estado de la técnica e impacto potencial esperado (incluida la repercusión socioeconómica y las implicaciones sociales más amplias del proyecto hasta la fecha)

REVOLUTION has delivered advances beyond the state of the art for a range of PCR containing thermoplastic material types and production processes for four demonstration vehicle components: Back seat panel, lower rear bumper, B-pillar cover and crash box. Good results from these demonstrators will help facilitate the wider roll-out of PCR containing materials within the automotive industry and adoption of circular approaches.

The project will impact a number of EU directives and policies, three important European industries (Automotive, Plastics, Chemicals) and assist with the transition to green transport and development of a wider circular economy. In particular, REVOLUTION will deliver some key technological solutions towards achieving ELV Directive objectives. Overall the impact of REVOLUTION activities will be environmental gains through the use of eco-design approaches and increased use of recycled materials.

The assessments undertaken during the project following have detailed the following impacts:

Economical
o Improved value chains for all use-cases
o Reduced environmental cost for all use cases
o Reduced energy cost for all use-cases
o Slightly increased final price for all use-cases except B-Pillar

Environmental
o Increased usage of recycled materials comparing to virgin ones and increased metal-replacement potential
o Increased range of EVs
o Increase recyclability rate of all use cases except Crash Box
o Positive contribution to usage of natural resources, ecosystem quality species and climate change

Social
o Positive impact on human health

REVOLUTION logo