Skip to main content
European Commission logo
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS

TOWARD EFFICIENT ELECTROCHEMICAL GREEN AMMONIA CYCLE

Description du projet

La production d’ammoniac vert soutient l’utilisation de l’ammoniac comme carburant renouvelable

L’ammoniac est essentiel à la production d’engrais pour l’industrie agricole. Il est également utilisé comme réfrigérant et sert à produire des plastiques, des explosifs, des pesticides et d’autres produits chimiques importants sur le plan commercial. Toutefois, l’ammoniac n’a pas encore été exploité en tant que vecteur énergétique. La teneur en hydrogène et la densité volumétrique énergétique de l’ammoniac sont élevées; en outre, contrairement à l’hydrogène, il peut facilement être comprimé et liquéfié à des fins de stockage. Cependant, sa production repose actuellement sur des procédés à haute température, à haute pression et à forte intensité énergétique qui entraînent une augmentation des émissions. Le projet TELEGRAM, financé par l’UE, développe des procédés électrochimiques verts pour la production d’ammoniac, résolvant ainsi un problème énergétique sans en aggraver un autre.

Objectif

Ammonia is one of the most important chemicals, but its production requires an energy intensive process, responsible for about 1-2% of total CO2 emissions worldwide. Ammonia is also potentially a formidable energy vector, with large hydrogen content, high energy volumetric density and, unlike H2, ease of liquefaction for storage. The main objective of TELEGRAM is to demonstrate, at the laboratory scale level, a complete green ammonia carbon–neutral energy cycle, based on electrochemical processes, enabling the use of ammonia as a green fuel.
Achievement of this target requires the development of two key enabling technologies. The first is the electrochemical ammonia synthesis. This will be developed by adopting a multi-stage membrane reactor which, starting from air, water and renewable sources (sunlight or wind), will produce ammonia at temperature <100°C. Novel energy materials, such as high entropy alloys and nanostructured catalysts will be studied and implemented in the reactor. The objective is to reach performance values able to make the process effective for industrial exploitation, i.e. faradaic efficiency >50% and production rate of at least 10^-7 mol/s /cm².
The second technology is the direct ammonia fuel cell (DAFC). For DAFC the best catalyst choice is platinum group metals (PGMs). Specific solutions will be developed in order to minimize or eliminate the PGMs achieving, operating below 100°C, a power density of at least 100 mW/cm² and chemical to electricity efficiency > 25%, with PGM loading < 0.05 mg/cm².
The developed ammonia reactor, powered by renewables, and the DAFC will be coupled together to demonstrate the complete ammonia energy cycle at a laboratory scale. The objective is to achieve 95% of the combined efficiencies of ammonia generation and fuel cell. These results will contribute to establish an European innovation base on the two key enabling technologies and on novel catalysts, and to build a sustainable renewable energy system.

Appel à propositions

H2020-LC-SC3-2018-2019-2020

Voir d’autres projets de cet appel

Sous appel

H2020-LC-SC3-2020-RES-RIA

Coordinateur

CONSIGLIO NAZIONALE DELLE RICERCHE
Contribution nette de l'UE
€ 602 665,00
Adresse
PIAZZALE ALDO MORO 7
00185 Roma
Italie

Voir sur la carte

Région
Centro (IT) Lazio Roma
Type d’activité
Research Organisations
Liens
Coût total
€ 602 665,00

Participants (3)