Four p-type semiconductors including Fe, Cu and Bi-based oxides were synthesized : Cu2O, CuFeO2, CaFe2O4 and CuBi2O4 . The synthesized compounds were characterized using different analysis methods, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and N2 physical adsorption analysis (BET). Binary (two-component), ternary (three-component) and cuaternary (4-component) nanocomposites have been prepared by combinig this four pure semiconductors and characterized for the photoelectrochemical reduction (PEC) of CO2. The effect of composite synthesis method on the PEC efficiency by h two different methods (hydrothermal and solid state dispersion) was studied. Films deposition of the synthesized samples (including semiconductors and composites) on fluorine doped tin oxide (FTO) was studied by two different methods: dip-coating and spin-coating. The number of semiconductor layers deposited and their amount was studied for optimization. Best results were obtained by spin coating 4 layers on the electrodes surface. Incorporation of carbon nanotubes fibers or multiwalled carbon nanotubes functionalized with carboxylic groups onto the FTO electrodes modified with semiconductors was studied to increase the charge transfer upon visible light irradiation. Only the strategy using the functionalized multiwalled carbon nanotubes worked out. The last step studied was the Immobilization of Formate Dehydrogenase (FDH) on the FTO electrodes modified with semiconductor films and MWCNTs, with or without redox polymer (cobaltocene). The best results wer obtained by physical adsorption of the enzyme in absence of the redox polymer and adding on top polyethylene imine as protection polymer. The highest photocurrents of CO2 reduction were obtained with the composite that contained the 4 synthesized semiconductor oxides.
An article reporting these scientific results is in preparation.