Advanced Materials and Advanced Manufacturing Technologies

Información del proyecto

A2M2TECH

Identificador del acuerdo de subvención: 101034425

DOI

10.3030/101034425

Proyecto cerrado

Fecha de la firma de la CE 8 Abril 2021

Fecha de inicio 1 Junio 2021

Fecha de finalización 31 Mayo 2026

Financiado con arreglo a

• EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions

Coste total

€ 4 773 120,00

Aportación de la UE

€ 2 386 560,00

Coordinado por

GAZI UNIVERSITESI
Türkiye

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Publicaciones

Peer reviewed articles (35)

Nanomaterial-engineered fluids in cooling Systems: From preparation to performance–A comprehensive review

Autores: Fatemeh Sadat Mirsafi, Muhammad Usama Zaheer, Elham Chamanehpour, Mustafa K. Ismael, Nicolas Oliveira Decarli, Gökhan Gurur Gökmen, Tamer Akan, Duygu Kisla, Horst-Günter Rubahn, Yogendra Kumar Mishra, Till Leißner
Publicado en: Renewable and Sustainable Energy Reviews, Edición 226, 2026, Página(s) 116309, ISSN 1364-0321
Editor: Elsevier BV
DOI: 10.1016/j.rser.2025.116309

Fatigue performance in additively manufactured metal alloys

Autores: Muhammad Muteeb Butt, Hossein Laieghi, Varma Kvvssn, Zia Uddin, Mussadiq Shah, Peyman Ansari, Metin U. Salamci, Albert E. Patterson, Hüseyin Kizil
Publicado en: Progress in Additive Manufacturing, Edición 10, 2025, Página(s) 1809-1841, ISSN 2363-9512
Editor: Springer Science and Business Media LLC
DOI: 10.1007/s40964-024-00738-2

Engineered surfaces for biomedical implants: advances in coatings, materials, and techniques

Autores: Muhammad Usama Zaheer, Muhammad Hassan Razzaq, Emerson Coy, Mehmet Fatih Aycan, Yogendra Kumar Mishra
Publicado en: Progress in Biomedical Engineering, Edición 8, 2026, Página(s) 022006, ISSN 2516-1091
Editor: IOP Publishing
DOI: 10.1088/2516-1091/ae4d91

Decoupled magnetic tuning and hardness stability during spinodal decomposition in an Al-Cr-Fe-V high-entropy alloy

Autores: Emre Gunes, Y. Eren Kalay
Publicado en: Materials Characterization, Edición 239, 2026, Página(s) 116744, ISSN 1044-5803
Editor: Elsevier BV
DOI: 10.1016/j.matchar.2026.116744

Characterization of Defect Distribution in an Additively Manufactured AlSi10Mg as a Function of Processing Parameters and Correlations with Extreme Value Statistics

Autores: Muhammad Muteeb Butt, Varma Kvvssn, Hossein Laieghi, Zia Uddin, Peyman Ansari, E. Kıvanç Sadak, Can Barış Toprak, Hüseyin Kızıl, Enrico Salvati
Publicado en: Advanced Engineering Materials, 2025, ISSN 1438-1656
Editor: John Wiley & Sons Ltd.
DOI: 10.1002/adem.202500641

Mathematical approaches for track analysis and process optimization in additive manufacturing

Autores: Mahdi Alishavandi, Rahmi Ünal, Metin Uymaz Salamci
Publicado en: Communications Materials, Edición 6, 2026, ISSN 2662-4443
Editor: Springer Science and Business Media LLC
DOI: 10.1038/s43246-025-00862-8

Additive Manufacturing of Ti6Al4V Using Directed Energy Deposition: An Elaborative Approach of Process Modelling via Computational Fluid Dynamics

Autores: Asif Ur Rehman, Kashif Azher, Aqsa Rehman, Mussadiq Shah, Muhammad Arif Mahmood, Celal Sami Tüfekci, Metin Uymaz Salamci
Publicado en: Lasers in Manufacturing and Materials Processing, Edición 12, 2025, Página(s) 201-225, ISSN 2196-7229
Editor: Springer Science and Business Media LLC
DOI: 10.1007/s40516-025-00277-w

Novel strut-based mechanical analysis: flow stress determination of electron beam melt (EBM) lattice structures

Autores: Muhammad Arslan Bin Riaz, Hacer İrem Erten, Mustafa Güden
Publicado en: Progress in Additive Manufacturing, Edición 10, 2025, Página(s) 10505-10514, ISSN 2363-9512
Editor: Springer Science and Business Media LLC
DOI: 10.1007/s40964-025-01354-4

Corrosion in laser powder bed fusion AlSi10Mg alloy

Autores: Hossein Laieghi, Varma Kvvssn, Muhammad Muteeb Butt, Peyman Ansari, Metin U. Salamci, Albert E. Patterson, Elmas Salamci
Publicado en: Engineering Reports, Edición 6, 2024, ISSN 2577-8196
Editor: Wiley
DOI: 10.1002/eng2.12984

Additive manufacturing of Al2O3 ceramics with MgO/SiC contents by laser powder bed fusion process

Autores: Ur Rehman, Asif, Abid Ullah, Tingting Liu, Rashid Ur Rehman, and Metin U. Salamci.
Publicado en: Frontiers in Chemistry, Edición 11, 2023, 2023, Página(s) 57, ISSN 2296-2646
Editor: Frontiers Media SA
DOI: 10.3389/fchem.2023.1034473

Machine learning and physics based empirical equations for fatigue life prediction of AM Ti-6Al-4 V

Autores: Muhammad Muteeb Butt, Mehmood ul Haq, Varma KVVSSN, Hossein Laieghi, Hakan Yavas, Metin U Salamci, Hüseyin Kızıl
Publicado en: Progress in Additive Manufacturing, Edición 11, 2026, Página(s) 4731-4749, ISSN 2363-9512
Editor: Springer Science and Business Media LLC
DOI: 10.1007/s40964-026-01615-w

A review of the experimental and numerical studies on the compression behavior of the additively produced metallic lattice structures at high and low strain rates

Autores: Muhammad Arslan Bin Riaz, Mustafa Güden
Publicado en: Defence Technology, Edición 49, 2025, Página(s) 1-49, ISSN 2214-9147
Editor: Elsevier BV
DOI: 10.1016/j.dt.2025.01.003

Toward novel AM feedstocks: Ultrasonically atomized 7075 and Al–Zn–Mg–Cu–Co–Cr–Mo powders

Autores: Varma Kvvssn, Hossein Laieghi, Muhammad M. Butt, Peyman Ansari, Metin U. Salamci, Elmas Salamci, Hüseyin Kizil
Publicado en: Powder Technology, Edición 470, 2026, Página(s) 121985, ISSN 0032-5910
Editor: Elsevier BV
DOI: 10.1016/j.powtec.2025.121985

AI‐Assisted Design and Evaluation of SLM‐Ti64 Implants for Enhanced Bone Regeneration

Autores: Muhammad Usama Zaheer, Muhammad Hassan Razzaq, Mehmet Fatih Aycan, Yogendra Kumar Mishra
Publicado en: Advanced Healthcare Materials, Edición 14, 2025, ISSN 2192-2640
Editor: John Wiley and Sons Ltd
DOI: 10.1002/adhm.202503154

The Impact of As-Built Surface Characteristics of Selective-Laser-Melted Ti-6Al-4V on Early Osteoblastic Response for Potential Dental Applications

Autores: Muhammad Hassan Razzaq, Olugbenga Ayeni, Selin Köklü, Kagan Berk, Muhammad Usama Zaheer, Tim Tjardts, Franz Faupel, Salih Veziroglu, Yogendra Kumar Mishra, Mehmet Fatih Aycan, O. Cenk Aktas, Tayebeh Ameri, Sinan Sen
Publicado en: Journal of Functional Biomaterials, Edición 16, 2025, Página(s) 230, ISSN 2079-4983
Editor: MDPI AG
DOI: 10.3390/jfb16070230

Investigation and validation of the flow stress equation and damage model parameters of an electron beam melted Ti6Al4V alloy with a martensitic phase

Autores: Mustafa Güden, Arslan Bin Riaz, Ahmet Kaan Toksoy, Murat Yıldıztekin, Hacer İrem Erten, Gülden Çimen, Burak Hızlı, Burçin Seven Çellek, Efe Güleç, Alper Taşdemirci, Hakan Yavaş, Sertaç Altınok
Publicado en: Materials Science and Engineering: A, Edición 885, 2025, Página(s) 145590, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/j.msea.2023.145590

A systematic review of Inconel 939 alloy parts development via additive manufacturing process

Autores: Syed Abbas Raza, Olcay Ersel Canyurt, Hüseyin Kürşad Sezer
Publicado en: Heliyon, Edición 10, 2026, Página(s) e25506, ISSN 2405-8440
Editor: Elsevier BV
DOI: 10.1016/j.heliyon.2024.e25506

Static and dynamic compression of a hybrid TPMS structure: effects of SLM process parameters

Autores: Mian Imran, Alper Taşdemirci, İlhan Şen, Çetin Bakıcı, Peyman Ansari, Metin U. Salamci, Mustafa Güden
Publicado en: Progress in Additive Manufacturing, Edición 11, 2026, Página(s) 3999-4023, ISSN 2363-9512
Editor: Springer Science and Business Media LLC
DOI: 10.1007/s40964-026-01563-5

Understanding the Effects of Manufacturing Attributes on Damage Tolerance of Additively Manufactured Parts and Exploring Synergy Among Process‐Structure‐Properties. A Comprehensive Review

Autores: Zia Uddin, Muhammad Muteeb Butt, Varma Kvvssn, Metin U. Salamci, Hüseyin Kizil
Publicado en: Engineering Reports, Edición 6, 2024, ISSN 2577-8196
Editor: Wiley
DOI: 10.1002/eng2.13020

A Buckingham-Pi dimensionless analysis for melt pool stability and defect prediction in additive manufacturing

Autores: Mahdi Alishavandi, Rahmi Ünal, Metin U. Salamci
Publicado en: Additive Manufacturing Letters, Edición 17, 2026, Página(s) 100366, ISSN 2772-3690
Editor: Elsevier BV
DOI: 10.1016/j.addlet.2026.100366

Comprehensive investigation of single track characteristics in laser powder bed fusion of IN625 via absorptivity-calibrated normalized enthalpy

Autores: Mahdi Alishavandi, Akın Orhangül, Haydar Guneş, Rahmi Ünal, Metin U. Salamci
Publicado en: Journal of Materials Research and Technology, Edición 42, 2026, Página(s) 3702-3723, ISSN 2238-7854
Editor: Elsevier Editora Ltda
DOI: 10.1016/j.jmrt.2026.03.257

Binder jetting of SS316L: a computational approach for droplet-powder interaction

Autores: Ur Rehman, Asif, Kashif Azher, Abid Ullah, Celal Sami Tüfekci, and Metin Uymaz Salamci
Publicado en: Rapid Prototyping Journal, Edición 7, 2023, 2023, Página(s) 1499–1509, ISSN 1355-2546
Editor: Emerald Group Publishing Ltd.
DOI: 10.1108/rpj-08-2022-0264

Corrigendum: Additive manufacturing of Al2O3 ceramics with MgO/SiC contents by laser powder bed fusion process

Autores: Asif Ur Rehman, Abid Ullah, Tingting Liu, Rashid Ur Rehman, Metin U. Salamci
Publicado en: Frontiers in Chemistry, Edición 11, 2023, ISSN 2296-2646
Editor: Frontiers Media SA
DOI: 10.3389/fchem.2023.1266823

Multiscale elemental segregation and post-HIP microstructural evolution in the laser powder bed fusion of IN738LC nickel-based superalloy

Autores: Mahdi Alishavandi, Akın Orhangül, Özgür Duygulu, Haydar Güneş, Rahmi Ünal, Metin U. Salamci
Publicado en: Materials & Design, Edición 267, 2026, Página(s) 116306, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2026.116306

Additive manufacturing for biomedical bone implants: Shaping the future of bones

Autores: Muhammad Hassan Razzaq, Muhammad Usama Zaheer, Humaira Asghar, O. Cenk Aktas, Mehmet Fatih Aycan, Yogendra Kumar Mishra
Publicado en: Materials Science and Engineering: R: Reports, Edición 163, 2026, Página(s) 100931, ISSN 0927-796X
Editor: Elsevier BV
DOI: 10.1016/j.mser.2025.100931

Correlation of LPBF process parameters and heat treatment with the corrosion behavior of AlSi10Mg alloy

Autores: Hossein Laieghi, Muhammad Muteeb Butt, Varma Kvvssn, Ameeq Farooq, Peyman Ansari, Metin U. Salamci, Elmas Salamci
Publicado en: Progress in Additive Manufacturing, Edición 10, 2025, Página(s) 10245-10264, ISSN 2363-9512
Editor: Springer Science and Business Media LLC
DOI: 10.1007/s40964-025-01238-7

Selective element vaporization in IN738LC laser powder bed fusion: linking normalized enthalpy, melt pool regimes, and bulk composition drift

Autores: Mahdi Alishavandi, Metin Salamci, Rahmi Ünal
Publicado en: Progress in Additive Manufacturing, 2026, ISSN 2363-9512
Editor: Springer Science and Business Media LLC
DOI: 10.1007/s40964-026-01809-2

Mechanism-based comparison of Ti-6Al-4V lattice topologies with and without face sheets under quasi-static and dynamic loading

Autores: Muhammad Arslan Bin Riaz, Zoran Ren, Aleksej Rikic, Mustafa Guden
Publicado en: Smart Materials in Manufacturing, Edición 4, 2026, Página(s) 100145, ISSN 2772-8102
Editor: Elsevier BV
DOI: 10.1016/j.smmf.2026.100145

A Review on Vibration Characteristics of Additively Manufactured Metal Alloys

Autores: Kashif Azher, Mussadiq Shah, Ahmad Reshad Bakhtari, Gustavo M. Castelluccio, Celal Sami Tüfekci, Andrea Cini, Nizami Akturk, Metin U. Salamci
Publicado en: Advanced Engineering Materials, Edición 26, 2025, ISSN 1438-1656
Editor: John Wiley & Sons Ltd.
DOI: 10.1002/adem.202301650

A Review on Laser Beam Shaping Application in Laser‐Powder Bed Fusion

Autores: Ahmad Reshad Bakhtari, Huseyin Kursad Sezer, Olcay Ersel Canyurt, Oğulcan Eren, Mussadiq Shah, Sundar Marimuthu
Publicado en: Advanced Engineering Materials, Edición 26, 2025, ISSN 1438-1656
Editor: John Wiley & Sons Ltd.
DOI: 10.1002/adem.202302013

Recent progress in additive manufacturing of 7XXX aluminum alloys

Autores: Varma Kvvssn, Muhammad Muteeb Butt, Hossein Laieghi, Zia Uddin, Elmas Salamci, Duck Bong Kim, Hüseyin Kizil
Publicado en: The International Journal of Advanced Manufacturing Technology, Edición 137, 2025, Página(s) 4353-4399, ISSN 0268-3768
Editor: Springer Verlag
DOI: 10.1007/s00170-025-15415-z

Correction: Vat photopolymerization-based 3D printing of polymer nanocomposites: current trends and applications

Autores: Mussadiq Shah, Abid Ullah, Kashif Azher, Asif Ur Rehman, Wang Juan, Nizami Aktürk, Celal Sami Tüfekci, Metin U. Salamci
Publicado en: RSC Advances, Edición 13, 2026, Página(s) 24412-24412, ISSN 2046-2069
Editor: Royal Society of Chemistry
DOI: 10.1039/d3ra90074f

The Influence of Nanoparticle Dispersions on Mechanical and Thermal Properties of Polymer Nanocomposites Using SLA 3D Printing

Autores: Shah, Mussadiq, Abid Ullah, Kashif Azher, Asif Ur Rehman, Nizami Akturk, Wang Juan, Celal Sami Tüfekci, and Metin Uymaz Salamci
Publicado en: Crystals, Edición 2, 2023, 2023, Página(s) 285, ISSN 2073-4352
Editor: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/cryst13020285

Vat photopolymerization-based 3D printing of polymer nanocomposites: current trends and applications

Autores: Shah, Mussadiq, Abid Ullah, Kashif Azher, Asif Ur Rehman, Wang Juan, Nizami Aktürk, Celal Sami Tüfekci, and Metin U. Salamci
Publicado en: Royal Society of Chemistry, Edición 13(2), 2023, 2023, Página(s) 1456-1496, ISSN 2046-2069
Editor: Royal Society of Chemistry
DOI: 10.1039/d2ra06522c

Machine Learning Driven Prediction and GUI Based Optimization of Quasi-Static Mechanical Properties in SLM Fabricated Ti6Al4V Alloy

Autores: Muhammad Muteeb Butt, Sidra Rashid, Mehmood ul Haq, Ayyaz Mustafa, Arshad Iqbal, Hossein Laieghi, Varma KVVSSN, Metin U. Salamci, Enrico Salvati, Hüseyin Kızıl
Publicado en: International Journal of Precision Engineering and Manufacturing, Edición 27, 2026, Página(s) 329-348, ISSN 2234-7593
Editor: Springer Science and Business Media LLC
DOI: 10.1007/s12541-025-01360-0