Auxetic Cementitious Composites by 3D Printing

Información del proyecto

ACC-3D

Identificador del acuerdo de subvención: 101041342

DOI

10.3030/101041342

Fecha de la firma de la CE 8 Marzo 2022

Fecha de inicio 1 Abril 2022

Fecha de finalización 31 Marzo 2027

Financiado con arreglo a

• European Research Council (ERC)

Coste total

€ 1 498 201,00

Aportación de la UE

€ 1 498 201,00

Coordinado por

TECHNISCHE UNIVERSITEIT DELFT
Netherlands

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (1)

Data Management Plan

Publicaciones

Peer reviewed articles (34)

Effects of temperature on autogenous deformation and early-age stress evolution in cement pastes with low water to cement ratio

Autores: Liang, M. (author); Liu, C. (author); Liang, X. (author); Chang, Z. (author); Schlangen, E. (author); Šavija, B. (author)
Publicado en: Construction and Building Materials, 2024, ISSN 1879-0526
Editor: Elsevier
DOI: 10.1016/J.CONBUILDMAT.2023.134752

Lattice modelling of early-age creep of 3D printed segments with the consideration of stress history

Autores: Ze Chang, Minfei Liang, Shan He, Erik Schlangen, Branko Šavija
Publicado en: Materials & Design, 2023, ISSN 1873-4197
Editor: Elsevier
DOI: 10.1016/J.MATDES.2023.112340

Inverse Design of Digital Materials Using Corrected Generative Deep Neural Network and Generative Deep Convolutional Neural Network

Autores: Zhi Wan, Ze Chang, Yading Xu, Yitao Huang, and Branko Šavija
Publicado en: Advanced Intelligent Systems, 2023, ISSN 2640-4567
Editor: Wiley-VCH GmbH
DOI: 10.1002/AISY.202200333

Direct ink writing of vascularized self-healing cementitious composites

Autores: Zhi Wan, Yading Xu, Shan He, Yu Chen, Jinbao Xie, Branko Šavija
Publicado en: Cement and Concrete Composites, 2023, ISSN 0958-9465
Editor: Elsevier
DOI: 10.1016/J.CEMCONCOMP.2023.105295

Predicting micromechanical properties of cement paste from backscattered electron (BSE) images by computer vision

Autores: Minfei Liang; Shan He; Yidong Gan; Hongzhi Zhang; Ze Chang; Erik Schlangen; Branko Šavija
Publicado en: Materials & Design, 2023, ISSN 1873-4197
Editor: Elsevier
DOI: 10.1016/J.MATDES.2023.111905

Autogenous deformation-induced stress evolution in cementitious materials considering viscoelastic properties: A review of experiments and models

Autores: Minfei Liang, Jinbao Xie , Shan He , Yu Chen , Erik Schlangen , Branko Šavija
Publicado en: Developments in the Built Environment, 2024, ISSN 2666-1659
Editor: Elsevier
DOI: 10.1016/J.DIBE.2024.100356

Auxetic cementitious composites (ACCs) with excellent compressive ductility: Experiments and modeling

Autores: Yading Xu, Branko Šavija
Publicado en: Materials & Design, 2024, ISSN 1873-4197
Editor: Elsevier
DOI: 10.1016/J.MATDES.2023.112572

Can superabsorbent polymers be used as rheology modifiers for cementitious materials in the context of 3D concrete printing?

Autores: Yu Chen , Minfei Liang, Yu Zhang , Zhenming Li , Branko Savija , Erik Schlangen , Oguzhan Çopuroglu
Publicado en: Construction and Building Materials, 2023, ISSN 1879-0526
Editor: Elsevier
DOI: 10.1016/J.CONBUILDMAT.2023.130777

Does early age creep influence buildability of 3D printed concrete? Insights from numerical simulations

Autores: Ze Chang, Minfei Liang , Yu Chen , Erik Schlangen , Branko Šavija
Publicado en: Additive manufacturing, 2023, ISSN 2214-7810
Editor: Elsevier
DOI: 10.1016/J.ADDMA.2023.103788

Early-age creep of 3D printable mortar: Experiments and analytical modelling

Autores: Ze Chang, Minfei Liang , Yading Xu, Zhi Wan, Erik Schlangen, Branko Savija
Publicado en: Cement and Concrete Composites, Edición 138, 2023, ISSN 1873-393X
Editor: Elsevier
DOI: 10.1016/j.cemconcomp.2023.104973

Self-healing cementitious composites with a hollow vascular network created using 3D-printed sacrificial templates

Autores: Wan, Z.; Zhang, Y.; Xu, Y.; Šavija, B.
Publicado en: Engineering Structures, 2023, ISSN 1873-7323
Editor: Elsevier
DOI: 10.1016/J.ENGSTRUCT.2023.116282

Peanut shaped auxetic cementitious cellular composite (ACCC)

Autores: Jinbao Xie; Yading Xu; Zhaozheng Meng; Minfei Liang; Zhi Wan; Branko Šavija
Publicado en: Construction and Building Materials, 2024, ISSN 1879-0526
Editor: Elsevier
DOI: 10.1016/J.CONBUILDMAT.2024.135539

3D auxetic cementitious-polymeric composite structure with compressive strain-hardening behavior

Autores: Yading Xu, Branko Šavija
Publicado en: Engineering Structures, 2023, ISSN 1873-7323
Editor: Elsevier
DOI: 10.1016/J.ENGSTRUCT.2023.116734

On the chemo-mechanical evolution process of high-volume slag cement paste

Autores: Minfei Liang , Yu Zhang , Shan He , Yu Chen , Erik Schlangen , Branko Šavija
Publicado en: Construction and Building Materials, 2023, ISSN 1879-0526
Editor: Elsevier
DOI: 10.1016/J.CONBUILDMAT.2023.132891

Printing path-dependent two-scale models for 3D printed planar auxetics by material extrusion

Autores: Bol, R.J.M., Xu, Y., Šavija, B.
Publicado en: Additive Manufacturing, 2024, ISSN 2214-7810
Editor: Elsevier
DOI: 10.1016/J.ADDMA.2024.104293

Spring-like behavior of cementitious composite enabled by auxetic hyperelastic frame

Autores: Yading Xu, Zhaozheng Meng, Rowin J.M. Bol, Branko Šavija
Publicado en: International Journal of Mechanical Sciences, 2024, ISSN 1879-2162
Editor: Elsevier
DOI: 10.1016/J.IJMECSCI.2024.109364

Experimentally informed modeling of the early‐age stress evolution in cementitious materials using exponential conversion from creep to relaxation

Autores: Liang, M. (author); Luzio, Giovanni Di (author); Schlangen, E. (author); Šavija, B. (author)
Publicado en: Computer-Aided Civil and Infrastructure Engineering, 2024, ISSN 1467-8667
Editor: Wiley
DOI: 10.1111/MICE.13156

Modelling of energy harvesting with bendable concrete and surface-mounted PVDF

Autores: Jinbao Xie; Yading Xu; Zhi Wan; Ali Ghaderiaram; Erik Schlangen; Branko Šavija
Publicado en: Smart Materials and Structures, 2024, ISSN 1361-665X
Editor: IOP Science
DOI: 10.1088/1361-665X/AD43CB

Numerical simulation of elastic buckling in 3D concrete printing using the lattice model with geometric nonlinearity

Autores: Ze Chang, Hongzhi Zhang, Minfei Liang, Erik Schlangen, Branko Savija
Publicado en: Automation in Construction, Edición 142, 2022, ISSN 1872-7891
Editor: Elsevier
DOI: 10.1016/j.autcon.2022.104485

Elevating mechanical performance of cementitious composites with surface-modified 3D-printed polymeric reinforcements

Autores: Xu, Y., Wan, Z., Šavija, B.
Publicado en: Developments in the Built Environment, 2024, ISSN 2666-1659
Editor: Elsevier
DOI: 10.1016/J.DIBE.2024.100522

Optimization of vascular structure of self-healing concrete using deep neural network (DNN)

Autores: Zhi Wan, Ze Chang , Yading Xu , Branko Savija
Publicado en: Construction and Building Materials, Edición 364, 2023, ISSN 1879-0526
Editor: Elsevier
DOI: 10.1016/j.conbuildmat.2022.129955

Unraveling the reinforcing mechanisms for cementitious composites with 3D printed multidirectional auxetic lattices using X-ray computed tomography

Autores: Meng, Z., Xu, Y., Xie, J., Zhou, W., Bol, R.J.M., Liu, Q.f., Šavija, B.
Publicado en: Materials & Design, 2024, ISSN 0264-1275
Editor: Elsevier
DOI: 10.1016/J.MATDES.2024.113331

Micromechanical Models for FDM 3D-Printed Polymers: A Review

Autores: Rowin J. M. Bol; Branko Šavija
Publicado en: Polymers, 2023, ISSN 2073-4360
Editor: MDPI
DOI: 10.3390/POLYM15234497

Auxetic cementitious cellular composite (ACCC) PVDF-based energy harvester

Autores: Jinbao Xie, Yading Xu, Zhi Wan, Ali Ghaderiaram, Erik Schlangen, Branko Šavija
Publicado en: Energy & Buildings, 2023, ISSN 1872-6178
Editor: Elsevier
DOI: 10.1016/J.ENBUILD.2023.113582

The use of additive manufacturing in self-healing cementitious materials: A state-of-the-art review

Autores: Zhi Wan, Yading Xu, Shan He, Erik Schlangen, Branko Šavija
Publicado en: Developments in the Built Environment, 2024, ISSN 2666-1659
Editor: Elsevier
DOI: 10.1016/J.DIBE.2024.100334

Automatic enhancement of vascular configuration for self-healing concrete through reinforcement learning approach

Autores: Zhi Wan, Yading Xu, Ze Chang, Minfei Liang, Branko Šavija
Publicado en: Construction and Building Materials, 2024, ISSN 1879-0526
Editor: Elsevier
DOI: 10.1016/J.CONBUILDMAT.2023.134592

3D concrete printing: Lattice modeling of structural failure considering damage and deformed geometry

Autores: Ze Chang, Minfei Liang , Yading Xu, Erik Schlangen, Branko Savija
Publicado en: Cement and Concrete Composites, 2022, ISSN 1873-393X
Editor: Elsevier
DOI: 10.1016/j.cemconcomp.2022.104719

Experimentally-informed lattice model to simulate fiber pull-out behavior at the microscale

Autores: Gan, Y., Yang, S., He, S., Šavija, B.
Publicado en: Construction and Building Materials, 2024, ISSN 0950-0618
Editor: Elsevier BV
DOI: 10.1016/J.CONBUILDMAT.2024.136839

Two scale models for fracture behaviours of cementitious materials subjected to static and cyclic loadings

Autores: Yidong Gan, Minfei Liang, Erik Schlangen, Klaas van Breugel, Branko Šavija
Publicado en: Construction and Building Materials, 2024, ISSN 1879-0526
Editor: Elsevier
DOI: 10.1016/J.CONBUILDMAT.2024.136107

A review of methods on buildability quantification of extrusion-based 3D concrete printing: From analytical modelling to numerical simulation

Autores: Ze Chang, Yu Chen, Erik Schlangen, Branko ˇ Savija
Publicado en: Developments in the Built Environment, 2023, ISSN 2666-1659
Editor: Elsevier
DOI: 10.1016/J.DIBE.2023.100241

Convolutional neural network for predicting crack pattern and stress-crack width curve of air-void structure in 3D printed concrete

Autores: Ze Chang , Zhi Wan , Yading Xu , Erik Schlangen , Branko Savija
Publicado en: Engineering Fracture Mechanics, 2022, ISSN 0013-7944
Editor: Elsevier
DOI: 10.1016/j.engfracmech.2022.108624

Fresh properties of limestone-calcined clay-slag cement pastes

Autores: Yu Chen, Yu Zhang, Branko Savija, Oguzhan Çopuroglu
Publicado en: Cement and Concrete Composites, 2023, ISSN 1873-393X
Editor: Elsevier
DOI: 10.1016/J.CEMCONCOMP.2023.104962

Efficiently assessing the early-age cracking risk of cementitious materials with a mini temperature stress testing machine

Autores: Liang, M., Chang, Z., Holthuizen, P., Chen, Y., He, S., Schlangen, E., Šavija, B.
Publicado en: Cement and Concrete Composites, 2024, ISSN 0958-9465
Editor: Pergamon Press Ltd.
DOI: 10.1016/J.CEMCONCOMP.2024.105710

A comprehensive review of fatigue of cementitious materials: Characterisation, modelling and mechanisms

Autores: Yidong Gan, Shen Yang, Yibing Zuo, Erik Schlangen, Boyuan Shi, Branko Šavija
Publicado en: Construction and Building Materials, Edición 452, 2024, ISSN 0950-0618
Editor: Elsevier BV
DOI: 10.1016/J.CONBUILDMAT.2024.138962