Colloidal control of multi-phase flow in geological porous media

Información del proyecto

COCONUT

Identificador del acuerdo de subvención: 101043288

DOI

10.3030/101043288

Fecha de la firma de la CE 29 Junio 2022

Fecha de inicio 1 Octubre 2022

Fecha de finalización 30 Septiembre 2027

Financiado con arreglo a

• European Research Council (ERC)

Coste total

€ 1 998 744,00

Aportación de la UE

€ 1 998 744,00

Coordinado por

CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE CNRS
France

Periodic Reporting for period 1 - COCONUT (Colloidal control of multi-phase flow in geological porous media)

Período documentado: 2022-10-01 hasta 2025-03-31

Resumen del contexto y de los objetivos generales del proyecto

Small-scale solid particles (nanometals, fine particles, bacteria, viruses, asphaltenes..) also referred to as colloids are ubiquitous in geological porous media. The nature of the particles can vary significant and their presence in the soils and subsurface may be desired or on the contrary, avoided. They can be manufactured for engineering purposes or generated in situ. Such particles have an incredible potential to remobilize non-aqueous phase trapped by capillary forces in soils and the subsurface, and then to remediate contaminated groundwater or to enhance oil recovery. Their use in daily engineering, however, is still underexploited because the lack of knowledge regarding their transport mechanisms is an obstacle to precise control of two-phase flow. Importantly, the presence of colloidal particles flowing in the subsurface challenges the standard models of flow and transport in porous media. The objective of COCONUT is to decipher the mechanisms leading to the displacement of fluids trapped in an unsaturated porous media in the presence of colloids using pore-scale modelling and microfluidic experiments, and eventually proposes advanced remediation techniques.

Trabajo realizado desde el comienzo del proyecto hasta el final del período abarcado por el informe y los principales resultados hasta la fecha

The COCONUT project uses a combined modelling-experimental strategy focusing on the pore-scale mechanisms and on the upscaling to the continuum-scale. The project is multi-disciplinary and uses computational and experimental sciences, fluid dynamics, electrochemistry, and mathematics.

* We developed microfluidic experiments to investigate two-phase flow as well as particulate transport and retention in porous media. The experimental setup allowed to investigate pore-clogging mechanisms due to the injection of sub-micron size particles as a function of flow rate and fluid salinity.

* We developed a novel kind of simulator to simulate particulate transport in porous media at the pore-scale. The model relies on a resolved-unresolved CFD-DEM approach and includes colloidal forces.

* We are developing column scale experiment to investigate two-phase flow and the retention of particle in 4D using synchrotron radiation facilities.

Avances que van más allá del estado de la técnica e impacto potencial esperado (incluida la repercusión socioeconómica y las implicaciones sociales más amplias del proyecto hasta la fecha)

The project will reveal the transport mechanisms leading to the remobilization of contaminants trapped by capillary forces using unprecedented high-resolution imaging and modeling techniques. The multi-scale multi-physics modelling tools developed during the project are released in open-source with the objective to gather a community of users.

Thanks to our microfluidic experiments, we have observed a new kind of pore-clogging mechanisms. Under certain conditions that we have determined, particle deposit on the porous matrix forming a dendrite that growths up to pore-clogging. This mechanism was suspected but it has never been observed before.


The CFD-DEM simulator that we developed is able to capture the three main pore-clogging mechanisms (i.e. sieving, bridging, aggregation). Applications go above the subsurface porous media. The code is generic and can be applied to other fields including batteries, particulate filters, biological media...

Pore-clogging at the pore-scale obtained with advanced CFD-DEM simulations

Microfluidic experiment of colloidal particles remobilizing droplet of oil

Pore-clogging obtained with microfluidic experiments