3D Printed Fouling-Resistant Photoactive Membranes for Wastewater Treatment

Project Information

PURAQUA

Grant agreement ID: 101065059

DOI

10.3030/101065059

Project closed

EC signature date 25 May 2022

Start date 15 June 2022

End date 14 September 2024

Funded under

• Marie Skłodowska-Curie Actions (MSCA)

Total cost

No data

EU contribution

€ 172 618,56

Coordinated by

UNIVERSIDADE DE AVEIRO
Portugal

CORDIS provides links to public deliverables and publications of HORIZON projects.

Links to deliverables and publications from FP7 projects, as well as links to some specific result types such as dataset and software, are dynamically retrieved from OpenAIRE .

Deliverables

Documents, reports (1)

Communication, Dissemination & Outreach Plan

The plan describes the planned measures to maximize the impact of the project, including the dissemination and exploitation measures that are planned, and the target group(s) addressed. Regarding communication measures and public engagement strategy, the aim is to inform and reach out to society and show the activities performed, and the use and the benefits the project will have for citizens.

Data Management Plan (1)

Data Management Plan

The Data Management Plan describes the data management life cycle for all data sets that will be collected, processed or generated by the action. It is a document describing what data will be collected, processed or generated and following what methodology and standards, whether and how this data will be shared and/or made open, and how it will be curated and preserved.

Publications

Peer reviewed articles (6)

Small concentrations, big results: μM addition of photoactive iron oxides with PMS, PDS, or H2O2, leads to enhanced removal of viruses at near-neutral pH

Author(s): Jialin Jia, Marco Minella, Mercedes Cid Ruiz, Jeremie Decker, Dong Li, Nuno P.F. Gonçalves, Alessandra Bianco Prevot, Tao Lin, Stefanos Giannakis
Published in: Water Research, Issue 258, 2024, ISSN 0043-1354
Publisher: Elsevier BV
DOI: 10.1016/j.watres.2024.121760

Simultaneous removal of multiple metal(loid)s and neutralization of acid mine drainage using 3D-printed bauxite-containing geopolymers

Author(s): Nuno P.F. Gonçalves, Eduardo Ferreira da Silva, Luís A.C. Tarelho, João A. Labrincha, Rui M. Novais
Published in: Journal of Hazardous Materials, Issue 462, 2024, ISSN 0304-3894
Publisher: Elsevier BV
DOI: 10.1016/j.jhazmat.2023.132718

From rust to robust disinfectants: How do iron oxides and inorganic oxidants synergize with UVA light towards bacterial inactivation?

Author(s): Jialin Jia, Marco Minella, Isabel del Castillo González, Aurelio Hernández Lehmann, Dong Li, Nuno P.F. Gonçalves, Alessandra Bianco Prevot, Tao Lin, Stefanos Giannakis
Published in: Science of The Total Environment, Issue 931, 2024, ISSN 0048-9697
Publisher: Elsevier BV
DOI: 10.1016/j.scitotenv.2024.172740

Impact of pyrolysis heating methods on biochars with enhanced CO2/N2 separation and their incorporation in 3D-printed composites

Author(s): Inês Correia, Marina Ilkaeva, Micaela Castellino, Sergio Bocchini, Rui M. Novais, Luís Mafra, Nuno P.F. Gonçalves, Mirtha A.O. Lourenço
Published in: Journal of Environmental Chemical Engineering, Issue 12, 2024, ISSN 2213-3437
Publisher: Elsevier BV
DOI: 10.1016/j.jece.2024.113875

Effective acid mine drainage remediation in fixed bed column using porous red mud/fly ash-containing geopolymer spheres

Author(s): Nuno P.F. Gonçalves, Mariana M. Almeida, João A. Labrincha, Rui M. Novais
Published in: Science of The Total Environment, Issue 940, 2024, ISSN 0048-9697
Publisher: Elsevier BV
DOI: 10.1016/j.scitotenv.2024.173633

3D-printing bauxite residue/fly ash-containing geopolymers as promising metal sorbents for water treatment

Author(s): Mariana M. Almeida, Nuno P.F. Gonçalves, Tânia Gameiro, Zélia Alves, João A. Labrincha, Rui M. Novais
Published in: Waste Management, Issue 190, 2024, ISSN 0956-053X
Publisher: Elsevier BV
DOI: 10.1016/j.wasman.2024.09.007