REINFORCING THE SCIENTIFIC EXCELLENCE AND INNOVATION CAPACITY IN POLYMER PROCESSING TECHNOLOGIES OF THE FACULTY OF POLYMER TECHNOLOGY

Project Information

IPPT_TWINN

Grant agreement ID: 101079051

DOI

10.3030/101079051

Project closed

EC signature date 26 July 2022

Start date 1 January 2023

End date 31 December 2025

Funded under

• Widening participation and spreading excellence

Total cost

€ 1 188 125,00

EU contribution

€ 1 188 125,00

Coordinated by

FAKULTETA ZA TEHNOLOGIJO POLIMEROV
Slovenia

CORDIS provides links to public deliverables and publications of HORIZON projects.

Links to deliverables and publications from FP7 projects, as well as links to some specific result types such as dataset and software, are dynamically retrieved from OpenAIRE .

Deliverables

Documents, reports (3)

Book of abstract: Challenges, trends and solutions in developing and processing recycled materials

D3.1

Guidelines for project’s visual identity

D6.3

Characterized properties of CAN and composites

D1.2

Publications

Peer reviewed articles (7)

Novel Coupled Simulation Method and Comprehensive Metrology to Enhance the Application of Prototype Injection Moulds

Author(s): Szabolcs Krizsma, András Suplicz
Published in: Advances in Science and Technology, 10th International Scientific Conference on Advances in Mechanical Engineering, Issue 165, 2025, ISSN 1662-0356
Publisher: Trans Tech Publications Ltd
DOI: 10.4028/P-Q56EQA

Investigating the influence of bending stiffness and processing parameters on single-leg bending geometries of additively manufactured composites

Author(s): T. Stiller, R.C. Kerschbaumer, C. Waly, B. Zink, J. Slapnik, G. Pinter
Published in: Results in Engineering, Issue 24, 2024, ISSN 2590-1230
Publisher: Elsevier BV
DOI: 10.1016/J.RINENG.2024.103276

Prediction of the thermal degradation–induced colour change of acrylonitrile butadiene styrene products as a function of temperature and titanium dioxide content

Author(s): Ábris Dávid Virág, András Suplicz, Dániel Török
Published in: Results in Engineering, Issue 24, 2025, ISSN 2590-1230
Publisher: Elsevier BV
DOI: 10.1016/J.RINENG.2024.103505

Calculation of the bonding strength of semi-crystalline polymers during overmolding

Author(s): Anna Héri-Szuchács, József Gábor Kovács
Published in: Polymer Testing, Issue 139, 2024, ISSN 0142-9418
Publisher: Elsevier BV
DOI: 10.1016/J.POLYMERTESTING.2024.108579

Modeling and measuring the bonding strength of overmolded polymer parts [project related publication. M1-M16]

Author(s): Ana Szuchacs, Tatyana Ageyeva, Jozsef Gabor Kovacs
Published in: Polymer Testing, Issue 125, 2023, ISSN 0142-9418
Publisher: Elsevier BV
DOI: 10.1016/j.polymertesting.2023.108133

Scientific Reports

Author(s): Béla Zink; Anna Héri-Szuchács; Szabolcs Hajagos; József Gábor Kovács
Published in: Scientific Reports, Issue 15, 2025, ISSN 2045-2322
Publisher: Nature Publishing Group
DOI: 10.1038/S41598-025-98657-X

Overprinting of TPU onto PA6 Substrates: The Influences of the Interfacial Area, Surface Roughness and Processing Parameters on the Adhesion between Components [project related publication. M1-M16]

Author(s): Janez Slapnik, Rebeka Lorber, Irena Pulko, Miroslav Huskić, Klementina Pušnik Črešnar
Published in: Polymers, Issue 16 (5), 2024, ISSN 2073-4360
Publisher: MDPI
DOI: 10.3390/POLYM16050650