New approach to innovative technologies in manufacturing

Información del proyecto

NEPTUN

Identificador del acuerdo de subvención: 101079398

DOI

10.3030/101079398

Proyecto cerrado

Fecha de la firma de la CE 11 Julio 2022

Fecha de inicio 1 Noviembre 2022

Fecha de finalización 31 Octubre 2025

Financiado con arreglo a

• Widening participation and spreading excellence

Coste total

€ 1 487 733,00

Aportación de la UE

€ 1 487 733,00

Coordinado por

POLITECHNIKA GDANSKA
Poland

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Websites, patent fillings, videos etc. (8)

Web site/page
Publications and promotional materials for communication

Promotional material, like: flyers, leaflets, brochures, videos, media releases, advertising gadgets etc.

Dedicated Stakeholders and Industry info day

Stakeholders and Industry info day will be primarily aimed at the representatives of Industry and local authorities. During this event, the representatives of the Partners participating in the NEPTUN Project will provide the industrialists with information regarding the nature of the Project, innovative manufacturing and with information regarding the principles of Industry 4.0

Project visual identity
Setting up Advisory Board for Manufacturers
Establishing Cluster of Excellence and creating Compendium of Good Manufacturing Practice
Final event
Publication of co-authored book about Industry 4.0 topics

Documents, reports (2)

Pilot research report

Report after the research project

Focus group reports & Exploratory Research Report

Conducting research process that will result in research hypotheses. Each partner will perform case analyses at their site and conduct a depth interview with industry partners. Results will be discussed during joint focus groups.Delivery months: 11, 23

Demonstrators, pilots, prototypes (1)

Demonstrator of new manufacturing technology

Publicaciones

Book chapters (2)

UWB-Based Indoor Navigation in a Flexible Manufacturing System Using a Custom Quadrotor UAV

Autores: Petros Savvakis; George-Christopher Vosniakos; Emmanuel Stathatos; Axel Debar-Monclair; Marek Chodnicki; Panorios Benardos
Publicado en: Lecture Notes in Mechanical Engineering - Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems, 2023, ISSN 0000-0000
Editor: -
DOI: 10.1007/978-3-031-38241-3_11

Project-Based Collaborative Research and Training Roadmap for Manufacturing Based on Industry 4.0

Autores: Marek Chodnicki; Mariusz Deja; George-Christopher Vosniakos; Panorios Benardos; Lihui Wang; Xi Vincent Wang; Thomas Braun; Robert Reimann
Publicado en: Lecture Notes in Mechanical Engineering - Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems, 2023, ISSN 0000-0000
Editor: -
DOI: 10.1007/978-3-031-38241-3_79

Peer reviewed articles (11)

The study on the appearance of deformation defects in the yacht lamination process using an ai algorithm and expert knowledge

Autores: Paweł Szalewski, Tacjana Niksa‑Rynkiewicz, Mariusz Deja
Publicado en: Scientific Reports, 2024, ISSN 2045-2322
Editor: Nature Publishing Group
DOI: 10.1038/S41598-024-56410-W

Cyclic behaviour modelling of additively manufactured Ti-6Al-4V lattice structures

Autores: Michał Doroszko, Andrzej Seweryn
Publicado en: International Journal of Mechanical Sciences, Edición 273, 2024, ISSN 0020-7403
Editor: Elsevier BV
DOI: 10.1016/J.IJMECSCI.2024.109219

Quality Evaluation of Small Features Fabricated by Fused Filament Fabrication Method

Autores: Dawid Zieliński; Mariusz Deja; Rui Zhu
Publicado en: Materials, 2025, ISSN 0000-0000
Editor: MDPI
DOI: 10.3390/MA18030507

A Comparative Study of Precision Surface Grinding Using Additively Fabricated Acrylonitrile–Butadiene–Styrene (ABS) Wheels with Continuous and Serrated Working Surfaces

Autores: Dawid Zieliński; Mariusz Deja; Mateusz Zator
Publicado en: Materials, 2024, ISSN 0000-0000
Editor: -
DOI: 10.3390/MA17235867

Recent Research Progress in the Abrasive Machining and Finishing of Additively Manufactured Metal Parts

Autores: Tesfaye Mengesha Medibew; Dawid Zieliński; Sisay Workineh Agebo; Mariusz Deja
Publicado en: Materials, 2025, ISSN 0000-0000
Editor: MDPI
DOI: 10.3390/MA18061249

Robot digital twin systems in manufacturing: Technologies, applications, trends and challenges

Autores: Qiang Qin; Zhihao Liu; Ruirui Zhong; Xi Vincent Wang; Lihui Wang; Magnus Wiktorsson; Wei Wang
Publicado en: Robotics and Computer-Integrated Manufacturing, 2026, ISSN 0000-0000
Editor: -
DOI: 10.1016/J.RCIM.2025.103103

High performance eco-friendly free abrasive machining using an additively fabricated tool and PCD based slurry

Autores: Dawid Zieliński; Mariusz Deja; Wit Grzesik; Krzysztof Żak
Publicado en: Scientific Reports, 2025, ISSN 0000-0000
Editor: -
DOI: 10.1038/S41598-025-16363-0

Influence of the three-body abrasion kinematics on the surface characteristics of an SLS-fabricated tool during machining of ceramics

Autores: Sisay Workineh Agebo; Dawid Zieliński; Mariusz Deja
Publicado en: Scientific Reports, 2025, ISSN 0000-0000
Editor: -
DOI: 10.1038/S41598-025-02692-7

Comparison of different optical measurement methods in the evaluation of the wear of SLS-fabricated tool used for free abrasive machining

Autores: Sisay Workineh Agebo; Dawid Zieliński; Mariusz Deja
Publicado en: SSRN, 2024, ISSN 0000-0000
Editor: SSRN
DOI: 10.2139/SSRN.4844842

An investigation of simple neural network models using smartphone signals for recognition of manual industrial tasks

Autores: Niksa‑Rynkiewicz, Tacjana; Benardos, Panorios; Witkowska, Anna; Vosniakos, George-Christopher
Publicado en: Scientific Reports, 2025, ISSN 0000-0000
Editor: -
DOI: 10.1038/S41598-025-06726-Y

Application of 3D scanning and computer simulation techniques to assess the shape accuracy of welded components

Autores: Marianna Jędrych; Damian Gorzkiewicz; Mariusz Deja; Marek Chodnicki
Publicado en: The International Journal of Advanced Manufacturing Technology, 2024, ISSN 0000-0000
Editor: -
DOI: 10.1007/S00170-024-14498-4