Strengthening the Excellence of Additive Manufacturing Capabilities

Información del proyecto

SEAMAC

Identificador del acuerdo de subvención: 101079481

DOI

10.3030/101079481

Proyecto cerrado

Fecha de la firma de la CE 12 Julio 2022

Fecha de inicio 1 Enero 2023

Fecha de finalización 30 Junio 2026

Financiado con arreglo a

• Widening participation and spreading excellence

Coste total

€ 1 494 137,50

Aportación de la UE

€ 1 494 137,50

Coordinado por

UNIVERZA V LJUBLJANI
Slovenia

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Publicaciones

Conference proceedings (9)

Plasma electrolytic polishing of lattices : role of lattice density and forced electrolyte flow

Autores: Jithinraj Edaklavan Koroth; Henning Zeidler; Krishna Kumar Saxena; Muhammad Hazak Arshad; Joško Valentinčič
Publicado en: International Conference on Additive Manufacturing and Post-Processing (ICAMPP), Portorož, 7-9 September 2025, 2025
Editor: Faculty of Mechanical Engineering
DOI: 10.5281/ZENODO.21675662

A preliminary study on soft tooling process chain for injection moulding of a micromixer

Autores: Izidor Sabotin; Krishnaraj Vijayan; Naveen Anthuvan; Joško Valentinčič
Publicado en: Proceedings of the World Congress on Micro and Nano Manufacturing 2023, Edición pp. 255–259, 2023
Editor: 4M Association / WCMNM
DOI: 10.5281/ZENODO.11395110

Current and Power Peak Values in Plasma Electrolytic Polishing

Autores: Joško Valentinčič; Henning Zeidler; Toni Böttger; Marko Jerman
Publicado en: Proceedings of the 7th World Congress on Micro and Nano Manufacturing, Edición pp. 45–48, 2024
Editor: 4M Association / WCMNM

Plasma electrolytic polishing of additively manufactured lattice structures: influence of cell size and forced electrolyte flow

Autores: Jithinraj Edaklavan Koroth; Andrej Lebar; Henning Zeidler; Joško Valentinčič
Publicado en: EUSPEN, Edición pp. 144–147, 2025
Editor: European Society for Precision Engineering and Nanotechnology (euspen)

Research activities in laser-based additive manufacturing of metals

Autores: Andrej Jeromen, Jaka Simončič, Anish Nair, Hammad Ur Rehman, Primož Potočnik, Edvard Govekar, null null
Publicado en: Svet strojništva, Edición 13, 2024, ISSN 1855-6493
Editor: Association of Mechanical Engineers of Slovenia (AMES)
DOI: 10.62020/SVET.STR.AS2024032

Parameter Optimization of Laser-Based Directed Energy Deposition (DED-LB) for Cladding In718, Fe64Ni36, and 18Ni300 on Cast Iron

Autores: Hammad Ur Rehman; Andrej Jeromen; Keren Zohar-Hauber; Shmuel Osovski; Edvard Govekar
Publicado en: Svet strojništva, Edición Vol. 14, no. 01/06, pp. 132–133, 2025, ISSN 1855-6493
Editor: Zveza strojnih inženirjev Slovenije (ZSIS/AMES)
DOI: 10.62020/SVET.STR.AS2025045

Plasma electrolytic polishing of additively manufactured metal parts: Optimizing the post processing workflow

Autores: Jithinraj Edaklavan Koroth, Marko Jerman, Joško Valentinčič, Izidor Sabotin, Andrej Lebar, Edvard Govekar, Andrej Jerman, Toni Boettger, Kristina Navickaite, Florian Tischner, Henning Zeidler, Karen Zohar Hauber, Shmulik Osovski
Publicado en: Svet strojništva, Edición 12, 2023, ISSN 1855-6493
Editor: Association of Mechanical Engineers of Slovenia (AMES)
DOI: 10.62020/SVET.STR.AS20230120

Influence of electrolyte flow on plasma electrolytic polishing of additively manufactured lattice structures

Autores: Jithinraj Edaklavan Koroth; Maxime Debard; Joško Valentinčič
Publicado en: 21st INSECT 2025 conference proceedings, 2025
Editor: Chemnitz University of Technology, Chemnitz
DOI: 10.51382/978-3-96100-259-7-18

Laser-based Metal Additive Manufacturing at the Faculty of Mechanical Engineering, University of Ljubljana

Autores: Andrej Jeromen, Edvard Govekar
Publicado en: Svet strojništva, Edición 12, 2023, ISSN 1855-6493
Editor: Association of Mechanical Engineers of Slovenia (AMES)
DOI: 10.62020/SVET.STR.AS20230086

Peer reviewed articles (3)

Plasma electrolytic polishing of additively manufactured metal parts: Optimizing the post processing workflow

Autores: Jithinraj Edaklavan Koroth, Joško Valentinčič, Marko Jerman, Izidor Sabotin, Andrej Lebar, Edvard Govekar, Andrej Jeromen, Henning Zeidler, Toni Böttger, Florian Tischner, Keren Zohar-Hauber, Shmuel Osovski
Publicado en: Open Research Europe, Edición 4, 2024, ISSN 2732-5121
Editor: F1000 Research Ltd
DOI: 10.12688/OPENRESEUROPE.16902.1

Advancements in surface finish for additive manufacturing of metal parts: a comprehensive review of plasma electrolytic polishing (PEP)

Autores: Valentinčič, Jithinraj, Zeidler
Publicado en: Virtual and Physical Prototyping, Edición 19(1), 2024, ISSN 0000-0000
Editor: Taylor & Francis
DOI: 10.1080/17452759.2024.2364222

Influence of anode immersion speed on current and power in plasma electrolytic polishing

Autores: Valentinčič, Zeidler, Boettger, Jerman
Publicado en: Micromachines, Edición 15(6), 2024, ISSN 0000-0000
Editor: MDPI
DOI: 10.3390/mi15060783